journal article·2015-06

Effect of various knitting techniques on mechanical properties of biaxial weft-knitted thermoplastic composites

Özgür Demircan, Shinsuke Ashibe, Tatsuya Kosui, Asami Nakai

Publisher page

Abstract

Within the scope of experiments, five kinds of biaxial weft-knitted (BWK) fabrics with various knitting techniques (plain, interlock, tuck, tuck-miss, and interlock2) were used as reinforcement systems to fabricate thermoplastic composites with polypropylene (PP) resin yarn. Then, the final composite became BWK composites with various knitting types. The mechanical properties of composites were investigated by conducting tensile, three-point bending, and three-point bending impact tests on specimens. In all specimens, PP was commingled with glass yarn. Glass was used as reinforcement. Fiber volume fraction ( V f ) of weft fibers of the interlock2 was the highest, and the length of straight part of loop shape was the longest in the interlock2 compared with the other four types of specimens. Because of the higher V f of the BWK composites with the interlock2, tensile, three-point bending, and three-point bending impact properties of the interlock2 was higher than the other four types (plain, interlock, tuck, and tuck-miss) of composite structures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Advanced Fibro-Science, Graduate School of Science and Technology, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto, Japan

Department of Material Science and Engineering, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, Turkey

Materials Science and Engineering Department, Faculty of Engineering, Ondokuz Mayis University, Samsun, Turkey

R&D New Technology Applications, Shima Seiki Mfg. Ltd, Wakayama, Japan

Department of Mechanical Engineering, Faculty of Engineering, Gifu University, Yanagido, Gifu City, Japan

References (21)

Show source-provided references
1. 10.1016/j.compositesa.2004.03.00310.1016/j.compositesa.2004.03.003 ↗
2. 10.1016/j.compositesb.2006.01.00310.1016/j.compositesb.2006.01.003 ↗
3. Demircan O · 2011
4. 10.1177/089270570605544610.1177/0892705706055446 ↗
5. 10.1016/S1359-835X(97)00013-410.1016/S1359-835X(97)00013-4 ↗
6. 10.1007/BF0070650210.1007/BF00706502 ↗
7. 10.1177/08927057000130040310.1177/089270570001300403 ↗
8. 10.1177/089270570708232610.1177/0892705707082326 ↗
9. 10.1177/089270570708232710.1177/0892705707082327 ↗
10. 10.1016/j.compositesa.2006.02.02710.1016/j.compositesa.2006.02.027 ↗
11. 10.1177/07316844000190050210.1177/073168440001900502 ↗
12. 10.1016/j.compositesa.2005.12.03210.1016/j.compositesa.2005.12.032 ↗
13. 10.1016/S1359-835X(01)00067-710.1016/S1359-835X(01)00067-7 ↗
14. 10.1016/j.compositesa.2004.03.00410.1016/j.compositesa.2004.03.004 ↗
15. Anwar KO · 388
16. 10.1016/j.compscitech.2008.09.03310.1016/j.compscitech.2008.09.033 ↗
17. 10.1016/j.compscitech.2009.11.00810.1016/j.compscitech.2009.11.008 ↗
18. 10.1080/0040500080219627010.1080/00405000802196270 ↗
19. 10.1115/IMECE2011-6496410.1115/IMECE2011-64964 ↗
20. Demircan O · 2012
21. Spacer DJ. · 2001