journal article·2016-04

Irradiation cross-linking of ethylene vinyl acetate/waste tire dust

Chantara Thevy Ratnam, Suganti Ramarad, Mohd Khalid Siddiqui, Anis Sakinah Zainal Abidin, Luqman TG Chuah

Publisher page

Abstract

In an attempt to maximize the beneficial effect of irradiation, the influence of multifunctional acrylates (MFAs) such as trimethylol propane triacrylate, ethylene glycol dimethacrylate, trimethylol propane trimethacrylate, and tripropylene glycol diacrylate on the 90/10 ethylene vinyl acetate/waste tire dust (EVA/WTD) were studied. The 90/10 EVA/WTD and EVA-containing 4 phr MFA prepared using a Haake mixer at 140°C and 50 r min −1 rotor speed. The blends were then irradiated using a 3.0-MeV electron beam machine. Results on gel fraction revealed that EVA/WTD blends were cross-linked by electron beam irradiation. Among the MFA employed in this studies, TPGDA was found to render highest tensile strength with the best retention in elongation at break and increased heat of fusion and crystallinity of blends upon irradiation. The changes in the properties of EVA/WTD blends upon irradiation are attributed to the cross-linking of the EVA matrix. The changes in crystallinity and crystalline melting temperatures of EVA/WTD blends upon irradiation are discussed in detail.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation · Thermal and Kinetic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Radiation Processing Technology Division, Malaysian Nuclear Agency (Nuclear Malaysia), Malaysia

Division of Manufacturing and Industrial Processes, Faculty of Engineering, University of Nottingham Malaysia Campus, Malaysia

Department of Chemical and Environmental Engineering, Faculty of Engineering, University Putra Malaysia (UPM), Malaysia

References (27)

Show source-provided references
1. 10.1080/0360255060055373910.1080/03602550600553739 ↗
2. 10.1016/j.polymertesting.2006.10.01110.1016/j.polymertesting.2006.10.011 ↗
3. 10.1016/S0142-9418(01)00125-810.1016/S0142-9418(01)00125-8 ↗
4. 10.1080/0360255090314727010.1080/03602550903147270 ↗
5. 10.1177/009524431139862910.1177/0095244311398629 ↗
6. 10.1016/j.polymdegradstab.2006.04.00110.1016/j.polymdegradstab.2006.04.001 ↗
7. 10.1016/S0032-3861(98)00244-410.1016/S0032-3861(98)00244-4 ↗
9. 10.1002/1439-2054(20010701)286:7<429::AID-MAME429>3.0.CO;2-#10.1002/1439-2054(20010701)286:7<429::AID-MAME429>3.0.CO;2-# ↗
10. 10.1080/0360255060055413310.1080/03602550600554133 ↗
11. 10.1016/S0168-583X(99)00017-810.1016/S0168-583X(99)00017-8 ↗
12. Thomas S · Int J Rad Appl Instrum C Rad Phys Chem · 1986 · 28 · 283
13. 10.1002/app.162410.1002/app.1624 ↗
14. 10.1002/app.162510.1002/app.1625 ↗
15. 10.1007/BF0198747110.1007/BF01987471 ↗
16. 10.1016/j.polymer.2006.09.05410.1016/j.polymer.2006.09.054 ↗
17. 10.1016/j.polymer.2004.05.01610.1016/j.polymer.2004.05.016 ↗
18. 10.1016/j.radphyschem.2007.02.02210.1016/j.radphyschem.2007.02.022 ↗
19. 10.1016/S0032-3861(99)00719-310.1016/S0032-3861(99)00719-3 ↗
20. 10.1016/0032-3861(93)90472-M10.1016/0032-3861(93)90472-M ↗
21. 10.1016/j.polymertesting.2008.07.00310.1016/j.polymertesting.2008.07.003 ↗
22. 10.1016/j.nimb.2008.02.04110.1016/j.nimb.2008.02.041 ↗
23. 10.1002/app.2307310.1002/app.23073 ↗
24. 10.1016/j.biomaterials.2005.04.02610.1016/j.biomaterials.2005.04.026 ↗
25. 10.1002/app.2215410.1002/app.22154 ↗
26. 10.1002/app.1082910.1002/app.10829 ↗
27. 10.1016/0141-3910(87)90001-210.1016/0141-3910(87)90001-2 ↗