journal article·2022-02

Evaluation flammability, mechanical and electrical properties of polypropylene after using zinc borates and montmorillonite

AA Younis

Publisher page

Abstract

This manuscript was built on studying the ignition, thermal, mechanical and electrical conductivity properties of the polypropylene by blending with different weight percentages of zinc borate (ZB) and potassium montmorillonite (MM). The tensile strength (TS) and elongation percentage ( E %) of the specimen were investigated. The thermogravimetric analysis (TGA) and differential thermal analysis (differential scanning calorimetry) were examined. LCR Meter instrument (Agilent E4980A, USA) was used to measure the electrical characteristics of the specimens. The heat capacity of the test specimens was determined according to EN ISO 1716:2004 (oxygen bomb calorimeter). By comparing the heat capacity results of the unblended with composite specimens, the difference in values is noticed. The flammability behaviours of the specimen were investigated by Underwriters Laboratories Horizontal Burning (UL-94HB) and limiting oxygen index (LOI) tests. The burning rate decreased by increasing the time of ignition with slightly LOI increased. These prove the main role of the ZB and MM at increasing the mechanical properties and electrical resistivity. The ash residue increased as the percentage of MM increased, while the heat capacity deceased.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Flame retardant materials and properties · Polymer Nanocomposites and Properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fire and Explosion Protection (FEP) Lab, National Institute for Standards (NIS), Giza, Egypt

References (41)

Show source-provided references
1. 10.1016/S0141-3910(02)00067-810.1016/S0141-3910(02)00067-8 ↗
2. 10.1016/j.ejpe.2016.02.00310.1016/j.ejpe.2016.02.003 ↗
3. 10.1016/j.tca.2007.02.00610.1016/j.tca.2007.02.006 ↗
4. 10.1016/j.porgcoat.2018.05.00710.1016/j.porgcoat.2018.05.007 ↗
5. 10.3390/ijms1209604010.3390/ijms12096040 ↗
6. 10.1016/j.progpolymsci.2011.07.00710.1016/j.progpolymsci.2011.07.007 ↗
7. Maina EW, Wanyika HJ, Gacanja AN. Instrumental characterization of montmorillonite Clay by FT-IR and XRD from J.K.U.A.T farm, in the Republic of Kenya. Chem Mat Res 2015; 7(10): 43–49.
8. 10.1080/03602559.2016.123328210.1080/03602559.2016.1233282 ↗
9. 10.2147/NSA.S12946810.2147/NSA.S129468 ↗
10. Kadam PG, Mhaske ST. Effect of extrusion reprocessing on the mechanical, thermal, rheological and morphological properties of nylon 6/talc nanocomposites. Therm. Comp Mat 2016; 29(7): 960–978.
11. 10.1177/089270571247497810.1177/0892705712474978 ↗
12. 10.1016/j.pecs.2017.11.00210.1016/j.pecs.2017.11.002 ↗
13. 10.1016/j.compositesb.2017.10.02610.1016/j.compositesb.2017.10.026 ↗
14. 10.1002/app.4595710.1002/app.45957 ↗
15. 10.1007/s10854-017-8405-110.1007/s10854-017-8405-1 ↗
16. 10.1016/j.clay.2003.08.00310.1016/j.clay.2003.08.003 ↗
17. 10.1007/s10853-016-0323-810.1007/s10853-016-0323-8 ↗
18. 10.1177/089270571243956110.1177/0892705712439561 ↗
19. ASTM D1238. Standard test method for melt flow rates of thermoplastics by extrusion plastometer. West Conshohocken. 2013.
20. ASTM D790. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. 2000 pp. 150–158.
21. ASTM D648. Standard test method for deflection temperature of plastics under flexural load in the edgewise position. 2006.
22. 10.1007/s10924-018-1209-410.1007/s10924-018-1209-4 ↗
23. 10.1002/pen.2197410.1002/pen.21974 ↗
24. ASTM D638. Standard test method for tensile properties of plastics. 2014.
25. ISO 11358. Plastics – thermogravimetry (TG) of polymers – Part 1: General principles. 2014.
26. 10.1177/089270570909350210.1177/0892705709093502 ↗
27. Ei-Alfy E, Yassin FA, Younis AA, et al. Development of eco-friendly flame retardant finishing system for cotton fabrics. Macr An Ind J 2015; 11(1): 14–23.
28. Younis AA. Treatment of plywood from burning by synthesis a new protective coating through sol-gel. Appl Chem Elixir Int J 2013; 65: 20196–20200.
29. Younis AA, Nour MA, El-Nagar K. Studying the effect of phosphorylated sol-gel on polyester fabric as flame-retardant coating. Appl Chem Elixir Int J 2014; 70: 24230–24235.
30. ASTM E794-06. Standard test method for melting and crystallization temperatures by thermal analysis. 2018.
31. EN ISO 1716. Reaction to fire tests for building products-determination of the heat of combustion. 2010.
32. Praniauskas V, Mačiulaitis R, Lipinskas D. Research of various fire-retardant treated wood species. In: 10th international conference, 19–21 May 2010, Vilnius, Lithuania.
33. 10.1002/fam.80210.1002/fam.802 ↗
34. 10.1002/1099-1018(200009/10)24:5<245::AID-FAM744>3.0.CO;2-710.1002/1099-1018(200009/10)24:5<245::AID-FAM744>3.0.CO;2-7 ↗
35. ISO 3795. Road vehicles and tractors and machinery for agriculture and forestry – determination of burning behaviour of interior materials. 2012.
36. Fil BA, Özmetin C, Korkmaz M. Characterization and electrokinetic properties of montmorillonite. Bulgarian Chem Comm 2014; 46(2): 258–263.
37. Akgul O, Acarali NB, Tugrul N, et al. X-ray, thermal, FT-IR and morphological studies of zinc borate in presence of boric acid synthesized by ulexite. Periodico di Mineralogia 2014; 83(1): 77–88.
38. 10.1515/chem-2018-001310.1515/chem-2018-0013 ↗
39. Kipcak AS, Acarali NB, Derun EM, et al. Effect of magnesium borates on the fire-retarding properties of zinc borates. J Chem 2014; 2014: 1–12.10.1155/2014/512164 ↗
40. 10.4236/gsc.2012.2100410.4236/gsc.2012.21004 ↗
41. 10.1080/19475411.2016.123931510.1080/19475411.2016.1239315 ↗