Linear translaminar fracture characterization of additive manufactured continuous carbon fiber reinforced thermoplastic
Source abstract
Abstract
This work presents the experimental determination of fracture mechanics parameters of composite specimens manufactured by fused filament fabrication (FFF) with continuous carbon fiber reinforced thermoplastic filaments, based on Linear Elastic Fracture Mechanics (LEFM). The critical mode I translaminar fracture toughness (K Ic ) and the critical energy release rate (G Ic ) are found for unidirectional and cross-ply laminates. The specimens were submitted to quasi-static tensile testing. Digital Image Correlation (DIC) is used to find the stress field. The stress fields around the crack tip are compared to linear elastic finite element simulations. The results demonstrate the magnitude of fracture toughness is in the same range as for polymers and some metals, depending on lay-up configuration. Besides, fractographic analyses show some typical features as river lines, fiber impression, fiber pulls-out and porosity aspects.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aeronautical Engineering, Instituto Tecnológico de Aeronáutica, São José dos Campos, São Paulo, Brazil
Aeronautical Structures Laboratory, Faculdade de Tecnologia de São José dos Campos Prof. Jessen Vidal, São José dos Campos, São Paulo, Brazil
Lightweight Structures Laboratory, Instituto de Pesquisas Tecnológicas, São José dos Campos, São Paulo, Brazil
References (61)
Show source-provided references
1. 10.1002/9781118097298.weoc08410.1002/9781118097298.weoc084 ↗
2. 10.1016/j.compositesb.2011.12.00310.1016/j.compositesb.2011.12.003 ↗
3. 10.1016/B978-1-78242-307-2.00004-X10.1016/B978-1-78242-307-2.00004-X ↗
4. 10.1002/admt.20180065310.1002/admt.201800653 ↗
5. 10.1108/RPJ-08-2018-019210.1108/RPJ-08-2018-0192 ↗
6. ISO/ASTM 52900. Terminology for additive manufacturing—general principles—terminology.
7. 10.1007/s11465-013-0248-810.1007/s11465-013-0248-8 ↗
8. 10.1016/j.addma.2021.10190010.1016/j.addma.2021.101900 ↗
9. Kollataj J. Additive manufacturing (3D Printing)—a potential structural future for tennis racket production, Plastics Technology, Degree thesis, Arcada, 2016.
10. 10.1016/j.ast.2016.12.01910.1016/j.ast.2016.12.019 ↗
11. 10.1016/j.addma.2016.04.00210.1016/j.addma.2016.04.002 ↗
12. 10.1590/2446-4740.0031610.1590/2446-4740.00316 ↗
13. 10.1016/j.addma.2018.01.00210.1016/j.addma.2018.01.002 ↗
14. 10.4236/ojcm.2016.6100310.4236/ojcm.2016.61003 ↗
15. 10.1016/j.addma.2017.06.00410.1016/j.addma.2017.06.004 ↗
16. Dutra TA
17. 10.1016/j.compstruct.2017.11.05210.1016/j.compstruct.2017.11.052 ↗
18. 10.1016/j.addma.2018.05.00710.1016/j.addma.2018.05.007 ↗
19. 10.1016/j.compositesb.2018.04.05410.1016/j.compositesb.2018.04.054 ↗
20. 10.1177/009524431881786710.1177/0095244318817867 ↗
21. Goh GD
22. 10.1007/s00170-018-2398-710.1007/s00170-018-2398-7 ↗
23. 10.1007/s40430-019-1630-110.1007/s40430-019-1630-1 ↗
24. 10.1002/pc.2578910.1002/pc.25789 ↗
25. 10.3390/ma1307165310.3390/ma13071653 ↗
26. 10.1016/j.cad.2015.04.00110.1016/j.cad.2015.04.001 ↗
27. Brown WF · ASTM STP 410 · 1966 · 410 · 1
28. Donadon MV. The structural behaviour of composite laminates manufactured using resin infusion under flexible tooling. PhD Thesis, Imperial College London, UK; 2005.
29. 10.1016/j.compstruct.2018.07.03910.1016/j.compstruct.2018.07.039 ↗
30. 10.1016/j.engfracmech.2013.10.02110.1016/j.engfracmech.2013.10.021 ↗
31. Markforged, Material Datasheet Composites, Ver. 4, https://www-objects.markforged.com/craft/materials/composites-data-sheet.pdf (2020, accessed 05 April 2021).
32. ASTM C830-00. Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure.
33. 10.1007/BF0232509210.1007/BF02325092 ↗
34. Imetrum, Non-contact precision measurement, https://www.imetrum.com/ (2017, accessed 10 June 2019).
35. Sandia national laboratories, digital image correlation engine dice, https://dice.sandia.gov/ (2017, accessed 10 June 2019).
36. 10.1016/j.compositesa.2006.12.00310.1016/j.compositesa.2006.12.003 ↗
37. 10.1016/j.compstruct.2017.11.09110.1016/j.compstruct.2017.11.091 ↗
38. 10.1016/j.compstruct.2018.06.04010.1016/j.compstruct.2018.06.040 ↗
39. 10.1115/1.80153510.1115/1.801535 ↗
40. Paris P · 1965
41. Liebowitz H · 1968
42. Daniel IM · 1994 · 3
43. Jones R · 2014 · 2
44. 10.1115/1.360120610.1115/1.3601206 ↗
45. Rooke DP · 1976
46. Abaqus, CAE documentation, http://abaqus.software.polimi.it/v6.14/ (2019, accessed 5 June 2019).
47. 10.1016/j.compstruct.2017.08.08810.1016/j.compstruct.2017.08.088 ↗
48. Mathworks, Support documents, htps://www.mathworks.com/help/curvefit/smooth.html, (2018, accessed 10 April 2019).
49. Dowling NE · 2012
50. 10.1177/089270571877286710.1177/0892705718772867 ↗
51. 10.1007/BF0072990010.1007/BF00729900 ↗
52. 10.1016/0013-7944(86)90118-910.1016/0013-7944(86)90118-9 ↗
53. 10.1007/BF0094216110.1007/BF00942161 ↗
54. Arbelo MA. Análise experimental e numérica de painéis aeronáuticos de materiais compósitos sob regime de pós-flambagem, PhD thesis, Instituto Tecnológico de Aeronáutica, Brazil, 2012.
55. 10.1016/S0266-3538(01)00011-210.1016/S0266-3538(01)00011-2 ↗
56. Greenhalgh E · 2009
57. 10.1002/app.1994.07051130610.1002/app.1994.070511306 ↗
58. 10.1016/j.ijadhadh.2019.10247710.1016/j.ijadhadh.2019.102477 ↗
59. AMCO Polymer, Nylon and Moisture Absorption, https://www.amcopolymers.com/resources/blog/nylon-and-moisture-absorption (2017, accessed 10June 2019).
60. 10.1007/s10704-017-0257-410.1007/s10704-017-0257-4 ↗
61. 10.1016/j.msea.2007.11.05310.1016/j.msea.2007.11.053 ↗