Enhanced mechanical and electrical properties of ECR-glass reinforced polyimide composites with incorporation of TiO 2 for insulation applications
Source abstract
Abstract
This paper presents the mechanical behaviour of novel class composites consisting of ECR-glass type reinforced polyimide (PI) composite loaded with TiO 2 nanoparticles. ECR glass reinforced PI composites were fabricated by adding TiO 2 particles at three different concentrations namely; 2, 4, and 6 wt% using 3D-Turbula dispersion and Spark Plasma Sintering (SPS) method. The morphologies, crystallinity, mechanical, and electrical properties of the produced composites were evaluated using scanning electron microscope (SEM), X-ray diffractometer, nanoindentation test, and LCR meter device. The SEM results revealed that the TiO 2 nanoparticles were homogenously dispersed into the PI composites. The mechanical properties, such as hardness, stiffness, and elastic modulus of the pure PI and ECR glass reinforced PI composite was improved by the incorporation of TiO 2 nanoparticles. Maximum hardness and elastic modulus values of 2.19 GPa and 13.99 GP, respectively, was observed in ECR reinforced PI composited loaded with 6 wt% TiO 2 nanoparticles. In addition, ECR glass reinforced PI composites with 6 wt% TiO 2 nanoparticles depicted the lowest dielectric constant (1.18), dielectric loss (1.14) and electrical conductivity (3.16 × 10 −6 S/cm). Finally, the findings suggest the easy processability of PI nanocomposites and their potential for mechanical and electrical insulation applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Chemical, Metallurgical & Materials Engineering, Tshwane University of Technology, Pretoria, South Africa
Centre for Energy and Power, Tshwane University of Technology, Pretoria, South Africa
Metallurgical & Materials Engineering, University of Lagos, Lagos, Nigeria
Funding
Center for Energy and Electric Power, and Center for Surface Engineering Research, Tshwane University of Technology (TUT) South Africa
References (48)
Show source-provided references
1. 10.1016/j.compositesb.2017.01.05110.1016/j.compositesb.2017.01.051 ↗
2. 10.1002/pc.2436710.1002/pc.24367 ↗
3. 10.1007/s00289-020-03487-810.1007/s00289-020-03487-8 ↗
4. 10.1016/j.compositesa.2016.02.01910.1016/j.compositesa.2016.02.019 ↗
5. 10.1155/2014/73507010.1155/2014/735070 ↗
6. 10.1002/adfm.20070020010.1002/adfm.200700200 ↗
7. 10.1002/anie.20100243910.1002/anie.201002439 ↗
8. 10.1007/BF0321906410.1007/BF03219064 ↗
9. 10.1177/0892705721100790410.1177/08927057211007904 ↗
10. 10.3390/polym1403038510.3390/polym14030385 ↗
11. 10.1177/073168441453079010.1177/0731684414530790 ↗
12. 10.1016/j.ceramint.2013.05.01810.1016/j.ceramint.2013.05.018 ↗
13. 10.31399/asm.hb.v21.a000335310.31399/asm.hb.v21.a0003353 ↗
14. Hennessee B · JEC Compos · 2005 · 20 · 64
15. Kravchehko I · JEC Compos · 2005 · 16 · 104
16. Wieczorek K · Arch Metall Mater · 2018 · 63 · 128110.24425/123802 ↗
17. Velaga BS · Int J Eng Res Technol · 2013 · 2 · 42510.15623/ijret.2013.0209064 ↗
18. 10.4028/www.scientific.net/JNanoR.40.9910.4028/www.scientific.net/JNanoR.40.99 ↗
19. 10.1007/s12221-021-0148-110.1007/s12221-021-0148-1 ↗
20. Sivabharathi V · Aust J Mech Eng · 2019 · 20 · 212
21. 10.1007/s12046-020-01539-310.1007/s12046-020-01539-3 ↗
22. 10.1016/j.mspro.2014.07.11510.1016/j.mspro.2014.07.115 ↗
23. 10.1016/j.polymertesting.2014.04.01210.1016/j.polymertesting.2014.04.012 ↗
24. 10.1109/ISGT-Asia.2012.630317910.1109/ISGT-Asia.2012.6303179 ↗
25. 10.1021/acsomega.9b0206710.1021/acsomega.9b02067 ↗
26. 10.1016/S0955-2219(00)00154-010.1016/S0955-2219(00)00154-0 ↗
27. 10.1016/j.clay.2017.02.02910.1016/j.clay.2017.02.029 ↗
28. 10.1016/j.polymertesting.2017.11.01810.1016/j.polymertesting.2017.11.018 ↗
29. 10.1016/j.jmatprotec.2011.05.02410.1016/j.jmatprotec.2011.05.024 ↗
30. 10.17159/2411-9717/2016/v116n12a1210.17159/2411-9717/2016/v116n12a12 ↗
31. 10.1016/j.jallcom.2015.07.22310.1016/j.jallcom.2015.07.223 ↗
32. 10.1038/pj.2010.11710.1038/pj.2010.117 ↗
33. 10.1016/S0034-3617(03)00634-910.1016/S0034-3617(03)00634-9 ↗
34. 10.1016/j.msea.2004.08.02810.1016/j.msea.2004.08.028 ↗
35. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
36. 10.1016/j.tca.2013.07.01510.1016/j.tca.2013.07.015 ↗
37. 10.1002/app.4521610.1002/app.45216 ↗
38. 10.3390/coatings1004031010.3390/coatings10040310 ↗
39. 10.1016/j.polymertesting.2006.03.01710.1016/j.polymertesting.2006.03.017 ↗
40. 10.1016/j.polymertesting.2006.02.00510.1016/j.polymertesting.2006.02.005 ↗
41. 10.1016/j.eurpolymj.2003.11.01710.1016/j.eurpolymj.2003.11.017 ↗
42. 10.1177/08927057970100060410.1177/089270579701000604 ↗
43. 10.1177/089270571348473810.1177/0892705713484738 ↗
44. 10.1016/S0266-3538(02)00079-910.1016/S0266-3538(02)00079-9 ↗
45. 10.1007/s11581-011-0649-910.1007/s11581-011-0649-9 ↗
46. Li Z · Sci Rep · 2017 · 7 · 110.1038/s41598-016-0028-x ↗
47. 10.1016/j.compositesa.2016.02.00210.1016/j.compositesa.2016.02.002 ↗
48. 10.1021/jacs.2c0213910.1021/jacs.2c02139 ↗