journal article·2015-07

Mechanical properties of biaxial weft-knitted and cross-ply thermoplastic composites

Özgür Demircan, Shinsuke Ashibe, Tatsuya Kosui, Asami Nakai

Publisher page

Abstract

Within the scope of experiments, two kinds of biaxial weft-knitted (BWK) fabrics with aramid (AR) and polyamide (PA) 66 stitch fibers were used as reinforcement systems to fabricate thermoplastic composites with PA66 resin yarn. Then, the final composite became BWK with AR stitch yarn and cross-ply. The mechanical properties of composites were investigated by conducting tensile and three-point bending impact tests on specimens. In all specimens, PA66 was commingled with AR yarn. AR was used as reinforcement. In preliminary studies, AR unidirectional composites with AR/PA66 commingled fibers and with various twisting angles were produced and appropriate twisting angle was found out by conducting tensile test on specimens. Due to the random multiple cracks that changed the fracture behavior of BWK composites with AR stitch, the tensile properties of the BWK composites with AR stitch became lower compared with the cross-ply. However, the three-point bending impact properties of the BWK composites with AR stitch fiber were higher compared with the cross-ply.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Advanced Fibro-Science, Graduate School of Science and Technology, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto, Japan

Material Science and Engineering Program, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, Turkey

Materials Science and Engineering Department, Faculty of Engineering, Ondokuz Mayis University, Samsun, Turkey

R&D New Technology Applications, Shima Seiki Mfg. Ltd, Wakayama, Japan

Department of Mechanical Engineering, Faculty of Engineering, Gifu University, Yanagido, Gifu City, Japan

References (19)

Show source-provided references
1. 10.1016/S1359-835X(01)00051-310.1016/S1359-835X(01)00051-3 ↗
2. 10.1016/j.compositesb.2006.01.00310.1016/j.compositesb.2006.01.003 ↗
3. Demircan O · 2011
4. 10.1177/089270570605544610.1177/0892705706055446 ↗
5. 10.1016/S1359-835X(97)00013-410.1016/S1359-835X(97)00013-4 ↗
6. 10.1007/BF0070650210.1007/BF00706502 ↗
7. 10.1177/08927057000130040310.1177/089270570001300403 ↗
8. 10.1177/089270570708232610.1177/0892705707082326 ↗
9. 10.1177/089270570708232710.1177/0892705707082327 ↗
10. 10.1016/j.compositesa.2006.02.02710.1016/j.compositesa.2006.02.027 ↗
11. 10.1177/07316844000190050210.1177/073168440001900502 ↗
12. 10.1016/j.compositesa.2005.12.03210.1016/j.compositesa.2005.12.032 ↗
13. 10.1016/S1359-835X(01)00067-710.1016/S1359-835X(01)00067-7 ↗
14. 10.1016/j.compositesa.2004.03.00410.1016/j.compositesa.2004.03.004 ↗
15. 10.1016/j.compscitech.2008.09.03310.1016/j.compscitech.2008.09.033 ↗
16. 10.1016/j.compscitech.2009.11.00810.1016/j.compscitech.2009.11.008 ↗
17. 10.1080/0040500080219627010.1080/00405000802196270 ↗
18. Demircan O
19. Demircan O · 2012