Spring-in behavior of woven carbon fiber/polycarbonate thermoplastic composites
Source abstract
Abstract
The spring-in behavior of woven carbon fiber/polycarbonate thermoplastic composite is investigated by both the experiment and simulation ways. These thermoplastic composite plates are thermoformed into V-shaped structures, and the final bending angle is measured after demolding. In the finite element simulation to describe the thermoforming and spring-in behavior of the composite, the discrete approach is adopted to simulate the behavior of woven carbon fabric and combined with a resin model. The results from both the experiment and the simulation indicate the spring-in behavior of this thermoplastic composite. For [(±45)] 6 blanks, the spring-in angle is around 2.60° for a 60-degree V-shape and around 1.72° for a 90-degree V-shape. For [(0/90)] 6 blanks, the spring-in angle is around 2.38° and 1.19° for 60-degree and 90-degree V-shapes, respectively. The [(±45)] 6 blank always has a slightly higher spring-in angle than the [(0/90)] 6 blank, even though the difference is small. The finite element results show 6% to 12% differences with the experimental values if the spring-in angle is used, and the error is less than 0.6% when the bending angle is compared. By using the present finite element analysis, the results indicate that the stacking sequence could have an evident effect on the spring-in angle, and symmetric laminates have less spring-in effect as compared to their unsymmetric counterparts.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, National Yunlin University of Science and Technology, Douliou, Taiwan
Funding
Ministry of Science and Technology, Taiwan
References (29)
Show source-provided references
1. 10.1177/089270570403821910.1177/0892705704038219 ↗
2. 10.1177/08927057890020010410.1177/089270578900200104 ↗
3. 10.1016/j.tws.2017.11.01110.1016/j.tws.2017.11.011 ↗
4. 10.1016/j.procir.2017.03.29410.1016/j.procir.2017.03.294 ↗
5. 10.1016/j.cirpj.2016.09.00410.1016/j.cirpj.2016.09.004 ↗
6. 10.1016/j.compstruct.2017.06.00710.1016/j.compstruct.2017.06.007 ↗
7. 10.1177/089270571348613310.1177/0892705713486133 ↗
8. 10.1016/j.jmatprotec.2007.11.23910.1016/j.jmatprotec.2007.11.239 ↗
9. 10.1177/0892705722108983010.1177/08927057221089830 ↗
10. 10.1177/089270571350366810.1177/0892705713503668 ↗
11. 10.1016/j.compositesa.2015.08.01710.1016/j.compositesa.2015.08.017 ↗
12. 10.1016/j.compositesa.2010.12.01410.1016/j.compositesa.2010.12.014 ↗
13. 10.1177/089270570201500244510.1177/0892705702015002445 ↗
14. Tabiei A · Int J Compos Mater · 2015 · 5 · 182
15. 10.1016/j.compositesb.2007.11.00810.1016/j.compositesb.2007.11.008 ↗
16. 10.1016/j.compositesb.2013.03.04510.1016/j.compositesb.2013.03.045 ↗
17. 10.1016/j.compscitech.2011.07.00410.1016/j.compscitech.2011.07.004 ↗
18. 10.1016/j.compstruct.2008.06.00510.1016/j.compstruct.2008.06.005 ↗
19. Schommer D, Duhovic M, Hausmann J. Modeling non-isothermal thermoforming of fabric-reinforced thermoplastic composites. In: 10th European LS-DYNA Conference, Wurzburg, Germany, 2015.
20. 10.1016/S0263-8223(01)00038-110.1016/S0263-8223(01)00038-1 ↗
21. 10.1016/j.compositesa.2019.10549110.1016/j.compositesa.2019.105491 ↗
22. 10.1016/j.compstruct.2017.03.10510.1016/j.compstruct.2017.03.105 ↗
23. 10.1016/j.compositesa.2009.11.00810.1016/j.compositesa.2009.11.008 ↗
24. 10.1016/S0266-3538(02)00105-710.1016/S0266-3538(02)00105-7 ↗
25. Padovec Z · Bulletin Appl Mech · 2011 · 7 · 31
26. Padovec Z · Appl Comput Mech · 2012 · 6 · 25
27. Brend E, Jasmin B. Mechanisms and sources of spring-in and spring-back of fiber reinforced thermoplastics. In: 58th Ilmenau Scientific Colloquium, Siegen, Germany, 08–12 September 2014, pp. 8–12.
28. 10.1016/j.proeng.2017.03.17610.1016/j.proeng.2017.03.176 ↗
29. 10.1016/j.compstruct.2018.10.09010.1016/j.compstruct.2018.10.090 ↗