Mechanical properties of nano/micro multilayered thermoplastic composites based on PP matrix
Source abstract
Abstract
We have shown in an earlier work that the addition of both organomodified layered silicates and micrometric calcium carbonate (CaCO 3 ) into a polypropylene (PP) matrix resulted in improved mechanical properties due to synergistic effect of the fillers. In this study, we analyzed the feasibility of producing continuous glass fibers composites with micro/nanoreinforced matrix. In particular, either highly filled matrices with micrometric CaCO 3 (22, 40, and 50 wt %) or micro/nanoreinforced matrix were used to prepare composites in order to investigate the effect of fillers on both mechanical and thermomechanical properties. The best mechanical performances were obtained when nano- and microsized particles were combined to reinforce the thermoplastic matrices employed in the film stacking manufacturing method. In such systems, the micro/nanocomposites have improved the flexural properties of the continuous fiber laminate, producing an increase of both flexural modulus (60%) and flexural strength (130%). Moreover, storage modulus of glass fibers composite prepared with micro/nanoreinforced matrix was higher than modulus of the composites manufactured with either neat PP matrix or microreinforced matrix in −40/150°C temperature range.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
IMAST, Piazzale Enrico Fermi 1, 8055 Portici (NA), Italy
Institute for Composite and Biomedical Materials (IMCB-CNR) P.le V. Tecchio 80, 80125 Naples, Italy
Department of Materials and Production Engineering, University of Naples “Federico II”, P.le V. Tecchio 80, 80125 Naples, Italy
Chemical Engineering Department, An-Najah National University, P.O. Box 7, Nablus, Palestine
References (25)
Show source-provided references
1. 10.1016/S0167-577X(00)00394-310.1016/S0167-577X(00)00394-3 ↗
2. 10.1002/app.2681810.1002/app.26818 ↗
3. 10.1016/j.compscitech.2005.02.00610.1016/j.compscitech.2005.02.006 ↗
4. 10.1177/00219980303518610.1177/002199803035186 ↗
5. 10.1016/j.compositesa.2005.12.02710.1016/j.compositesa.2005.12.027 ↗
6. 10.1016/S0266-3538(02)00063-510.1016/S0266-3538(02)00063-5 ↗
7. 10.1016/j.compositesa.2006.03.00110.1016/j.compositesa.2006.03.001 ↗
8. 10.1177/002199830707649110.1177/0021998307076491 ↗
9. 10.4028/www.scientific.net/KEM.334-335.77310.4028/www.scientific.net/KEM.334-335.773 ↗
10. 10.1016/j.engfracmech.2006.05.01510.1016/j.engfracmech.2006.05.015 ↗
11. 10.1016/j.compositesa.2005.02.00710.1016/j.compositesa.2005.02.007 ↗
12. 10.1016/j.compositesa.2009.05.01010.1016/j.compositesa.2009.05.010 ↗
13. 10.1021/la062743p10.1021/la062743p ↗
14. 10.1016/j.polymer.2005.08.00310.1016/j.polymer.2005.08.003 ↗
15. 10.1016/S1359-835X(04)00186-110.1016/S1359-835X(04)00186-1 ↗
16. Aurilia M · 2005
17. 10.1016/j.compositesa.2006.09.01010.1016/j.compositesa.2006.09.010 ↗
18. 10.1016/j.compscitech.2008.10.01710.1016/j.compscitech.2008.10.017 ↗
19. Berardini F · 2008 · 181
20. 10.1016/j.compscitech.2009.01.00910.1016/j.compscitech.2009.01.009 ↗
21. 10.1002/app.2701710.1002/app.27017 ↗
22. 10.1002/mame.20030015710.1002/mame.200300157 ↗
23. 10.1002/app.3024110.1002/app.30241 ↗
24. 10.1016/j.progpolymsci.2003.08.00210.1016/j.progpolymsci.2003.08.002 ↗
25. 10.1002/adv.2018710.1002/adv.20187 ↗