journal article·2017-01

Inductive heating of glass fibre-reinforced thermoplastics using fibre- and wire-shaped stainless steel susceptors

Danilo Mattheß, Dirk Landgrebe, Welf-Guntram Drossel

Publisher page

Abstract

This article deals with an experimental and numerical study of the inductive heating of glass fibre (GF)-reinforced thermoplastics with susceptors made of stainless steel that are embedded in them. The objective of this article is to examine the links between individual process and system parameters and the heating behaviour of fibre-reinforced plastics. Two different susceptor designs were tested in relation to their heating capability. Furthermore, it was possible to experimentally study the dependency of the space between the specimens and inductors and therefore the impact of the generator output of the induction system and inductor attachments differing in their geometric shapes in terms of heating. Moreover, it was possible to use numerical simulation to examine the heating behaviour at different frequencies. These findings indicate that it is possible to heat GF-reinforced semi-finished products by fibre-shaped susceptors. Finally, it was possible to demonstrate that the heating process can be designed by means of the frequency of the induction system and directly controlled using the generator output.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Induction Heating and Inverter Technology · Mechanical and Thermal Properties Analysis · Electromagnetic Compatibility and Noise Suppression

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institut für Werkzeugmaschinen und Produktionsprozesse, TU Chemnitz, Chemnitz, Germany

References (29)

Show source-provided references
1. Jahn B Witten E. Composites-marktbericht 2013: marktentwicklungen trends ausblicke und herausforderungen. Report Industrievereinigung verstärkte Kunststoffe AVK Germany 2013.
2. Henninger FH. Beitrag zur Entwicklung neuartiger Fertigungsverfahren zur Herstellung von Bauteilen aus kontinuierlich faserverstärkten Thermoplasten. PhD Thesis, TU Kaiserslautern, Germany, 2005.
3. Neitzel M, Mitschang P. Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. München/Wien: Carl Hanser Verlag, 2004.
4. Ermanni P. Composites Technologien. Zürich: ETH Zürich, 2007.
5. Moser L. Experimental analysis and modeling of susceptorless induction welding of high performance thermoplastic polymer composites. PhD Thesis, Kaiserslautern, Germany, 2012.
6. 10.1016/j.compositesa.2005.10.00910.1016/j.compositesa.2005.10.009 ↗
7. Silvermann EM, Griese RA. Joining methods for graphite/peek thermoplastic composites. SAMPE J 1989; 25(5): 34–37.
8. 10.1177/096739111999070530910.1177/0967391119990705309 ↗
9. Maguire DM. Joining thermoplastic composites. SAMPE J 1989; 25(1): 11–14.
10. Vervlied J, Heward C. Susceptor-less induction welding using filmix co-spun thermoplastic blends. In: Proceedings of the conference: composites in manufacturing, Society of Manufacturing Engineers, 1–10, 1991.
11. 10.1177/089270571245603110.1177/0892705712456031 ↗
12. 10.1177/08927057980110040310.1177/089270579801100403 ↗
13. 10.1177/08927050302819210.1177/089270503028192 ↗
14. 10.1179/mst.1989.5.3.28110.1179/mst.1989.5.3.281 ↗
15. Schwartz MM. Joining of composite materials. Materials Park: ASM International, 1994.
16. Benetar A, Gutowski TG. Methods for fusion bonding thermoplastic composites. SAMPE Q 1986; 18(1): 35–42.
17. Benkowsky G. Induktionserwärmung. 5. Auflage. Berlin: Verlag Technik GmbH, 1990.
18. 10.1007/978-3-8348-9245-410.1007/978-3-8348-9245-4 ↗
19. 10.1007/978-1-4471-0171-010.1007/978-1-4471-0171-0 ↗
20. 10.1016/0261-3069(87)90059-810.1016/0261-3069(87)90059-8 ↗
21. 10.1002/pen.1012910.1002/pen.10129 ↗
22. Suwanwatana W, Yarlagadda S, Gillespie JW . Induction bonding of composite materials using nickel/polysulfone films. In: Goldberg AB, Maher MC (eds) 34th International Sampe Technical Conference. Baltimore, USA, 04–07 November 2002, Covina: SAMPE International Business Office, pp. 1026–1039.
23. Hodges WT, Tyeryar JR, Berry M. Bonding and nondestructive evaluation of graphite/peek composites and titanium adherends with thermoplastic adhesives. Dearborn: Society of Manufacturing Engineers, 1985.
24. Nagumo T, Nkamura H, Yoshida Y, . Evaluation of peek matrix composites. In: Carson R, Burg M (eds) 32nd International SAMPE Symposium. San Diego, USA, 6–9 April 1987, Covina: SAMPE International Business Office, pp. 396–407.
25. Stavrov D, Bersee HEN, Beukers A. The influence of the heating element on resistance welding of thermoplastic composite materials. In: ICCM-14 Conference, San Diego, USA, 14–18 July 2003.
26. 10.1177/002199830303700677610.1177/0021998303037006776 ↗
27. Wrona E. Numerische simulation des erwärmungsprozesses für das induktive randschichthärten komplexer geometrien. Göttingen: Cuvillier Verlag, 2005.
28. 10.1007/978-3-642-25794-010.1007/978-3-642-25794-0 ↗
29. Schätzing W, Müller G. FEM für praktiker – vand 4: elektrotechnik. Renningen: Expert Verlag, 2003.