journal article·2021-02

Effects of pressure, boundary conditions, and cutting reliefs on thermo-hydroforming of fiber-reinforced thermoplastic composite helmet based on numerical optimization

Hyunchul Ahn, Nicholas Eric Kuuttila, Farhang Pourboghrat

Publisher page

Abstract

Compared with layup techniques, thermo-hydroforming is shown to be a viable process for mass production of thermoplastic composite structures due to its relatively rapid cycle time and low impact on the microstructure of the material. However, unlike layup technique, thermo-hydroforming can produce wrinkles in the formed part. A research was conducted wherein ABAQUS/CAE (6.14-1) was employed to numerically study the impact of thermo-hydroforming process parameters on the formation of wrinkles in a thermoplastic helmet. The optimized properties of the fiber-reinforced polymer composite was previously determined by the authors using the preferred fiber orientation model implemented as a user material subroutine (VUMAT). To account for the interaction between different layers of the laminated composite, the cohesive zone model was employed. The objective of the study was to use the simulation tool to minimize the overall wrinkle density and wrinkle height in the formed helmet as a function of the fluid pressure, boundary conditions, and especially the blank shape and the relief cuts made in the blank.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Metal Forming Simulation Techniques · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Integrated Systems Engineering, The Ohio State University, Columbus, OH, USA

SpaceX, Redondo Beach, CA, USA

Funding

US Army TACOM

References (29)

Show source-provided references
1. 10.1023/A:100478030148910.1023/A:1004780301489 ↗
2. 10.1177/08927057960090030210.1177/089270579600900302 ↗
3. 10.1177/08927057890020010410.1177/089270578900200104 ↗
4. Pourboghrat F, Zampaloni MA, Benard A. Hydroforming of composite materials. US Patent Number 6631630, USA, 2003.
5. 10.1016/j.compositesa.2007.01.00110.1016/j.compositesa.2007.01.001 ↗
6. Zampaloni MA. A multipreferred fiber orientation constitutive model for fiber mat-reinforced thermoplastics with a random orientation applied to the stamp thermohydroforming process, PhD Thesis, Michigan State University, USA 2003.
7. 10.1177/089270570403821910.1177/0892705704038219 ↗
8. 10.1016/j.compositesa.2008.04.01510.1016/j.compositesa.2008.04.015 ↗
9. Beyler CL · SFPE Handb Fire Prot Eng · 2002 · 2 · 111
10. 10.1016/S1359-835X(02)00053-210.1016/S1359-835X(02)00053-2 ↗
11. 10.1016/j.compositesa.2005.01.00710.1016/j.compositesa.2005.01.007 ↗
12. 10.1016/j.ijmecsci.2005.02.00310.1016/j.ijmecsci.2005.02.003 ↗
13. 10.1016/S0890-6955(03)00172-X10.1016/S0890-6955(03)00172-X ↗
14. 10.1016/j.jmatprotec.2012.05.00210.1016/j.jmatprotec.2012.05.002 ↗
15. 10.1016/j.jmatprotec.2010.07.01910.1016/j.jmatprotec.2010.07.019 ↗
16. 10.1016/S0924-0136(02)00788-410.1016/S0924-0136(02)00788-4 ↗
17. 10.1016/j.ijmecsci.2017.09.01910.1016/j.ijmecsci.2017.09.019 ↗
18. 10.1016/j.ijmecsci.2018.05.01510.1016/j.ijmecsci.2018.05.015 ↗
19. 10.1533/9781845692537.110.1533/9781845692537.1 ↗
20. 10.1016/j.compositesa.2012.10.00410.1016/j.compositesa.2012.10.004 ↗
21. 10.1016/S0263-8223(03)00056-410.1016/S0263-8223(03)00056-4 ↗
22. 10.1016/j.compositesa.2016.05.01910.1016/j.compositesa.2016.05.019 ↗
23. 10.1016/j.matdes.2015.11.11310.1016/j.matdes.2015.11.113 ↗
24. 10.1177/002199831876254710.1177/0021998318762547 ↗
25. Pourboghrat F, Kuuttila NE. Apparatus and methods for thermohydroforming. US Patent Number 20160129495, USA, 2016.
26. 10.1016/j.compositesa.2012.08.01210.1016/j.compositesa.2012.08.012 ↗
27. 10.1016/j.jmps.2013.08.02110.1016/j.jmps.2013.08.021 ↗
28. 10.1016/j.compstruct.2011.01.00210.1016/j.compstruct.2011.01.002 ↗
29. 10.1016/j.compstruct.2009.01.00410.1016/j.compstruct.2009.01.004 ↗