journal article·2022-04

Effect of sequence of melt mixing on the properties and morphology of blends of polypropylene, styrene–ethylene–butylene–styrene copolymer grafted with maleic anhydride, and organophilic montmorillonite clay

Tiago Nunes Lima, Thatiana Cristina Pereira de Macedo, Marcelo Massayoshi Ueki

Publisher page

Abstract

Styrene–ethylene–butylene–styrene (SEBS) copolymer, grafted or not, with maleic anhydride and organophilic montmorillonite clay was melt mixed with polypropylene (PP) using different mixing sequences to understand its effect on properties and morphology. The addition of clay changed the blend morphology from large elongated domains to droplets. The nanocomposites without maleic anhydride presented clay in the intercalated form. In the formulation containing maleic anhydride, clay is exfoliated on the blend, indicating that the maleic anhydride group acted to increase the interaction between the clay lamellae and the polymer chains. The best balance of mechanical properties was achieved in the formulation in which the clay was first melt mixed in SEBS without maleic anhydride and afterward melt mixed with clay and PP. It is reported in the literature that nanocomposites with exfoliated structures have better mechanical properties than nanocomposites with intercalated structure. However, in this study, an opposite trend was found, which may be related to the higher amount of crystalline phase formed in the intercalated structure nanocomposites, since the clay intercalation phenomenon in the polymer chains favored the polymer crystallization process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Programa de Pós-graduação em Ciência e Engenharia de Materiais, Universidade Federal de Sergipe, São Cristóvão, Brazil

Senai Cimatec, Salvador, Brazil

References (30)

Show source-provided references
1. Ying L · J Appl Polym Sci · 2017 · 134 · 4438610.1002/app.44386 ↗
2. Lei L · Am J Sci Technol · 2015 · 2 · 188
3. 10.1021/ma901952p10.1021/ma901952p ↗
4. 10.1039/c3ra45325a10.1039/c3ra45325a ↗
5. 10.1177/089270571247500110.1177/0892705712475001 ↗
6. Ying L · J Appl Polym Sci · 2014 · 131 · 4120210.1002/app.41202 ↗
7. 10.1021/ma102707f10.1021/ma102707f ↗
8. 10.1016/j.polymertesting.2018.10.04110.1016/j.polymertesting.2018.10.041 ↗
9. 10.1007/s00289-012-0780-410.1007/s00289-012-0780-4 ↗
10. 10.1002/app.2987510.1002/app.29875 ↗
11. Ranjbar M · 113
12. 10.1016/j.clay.2015.02.02810.1016/j.clay.2015.02.028 ↗
13. 10.1002/polb.2059610.1002/polb.20596 ↗
14. Emre T · J Compos Mater · 2018 · 16 · 1
15. 10.1016/j.eurpolymj.2016.02.02310.1016/j.eurpolymj.2016.02.023 ↗
16. 10.1016/j.clay.2016.09.03410.1016/j.clay.2016.09.034 ↗
17. 10.1080/03602559.2013.84370610.1080/03602559.2013.843706 ↗
18. 10.1016/j.polymertesting.2017.07.03310.1016/j.polymertesting.2017.07.033 ↗
19. Carlos IRO · J Thermoplast Compos Mater · 2019 · 18 · 1
20. 10.1177/089270571772097110.1177/0892705717720971 ↗
21. 10.1177/089270571559836410.1177/0892705715598364 ↗
22. 10.1016/j.progpolymsci.2014.04.00210.1016/j.progpolymsci.2014.04.002 ↗
23. 10.1016/j.polymer.2005.05.14510.1016/j.polymer.2005.05.145 ↗
24. Amir B · J Appl Polym Sci · 2015 · 132 · 4196910.1002/app.41969 ↗
25. Emre T · Polym Compos · 2017 · 40 · 1
26. Baine RL. Polymer heats of fusion. Thermal applications note. New Castle, DE: TA Instruments, http://www.tainstruments.com/pdf/literature/TN048.pdf (1972).
27. 10.1002/polb.2220210.1002/polb.22202 ↗
28. 10.1007/s10965-016-0979-410.1007/s10965-016-0979-4 ↗
29. 10.1007/978-94-017-5349-410.1007/978-94-017-5349-4 ↗
30. 10.1016/j.eurpolymj.2018.02.00410.1016/j.eurpolymj.2018.02.004 ↗