journal article·2022-11

Temperature-frequency-dependent properties analysis of a bio-composite based on a new liquid thermoplastic resin reinforced with jute fibers

Lorena Cristina Miranda Barbosa, Gabriel Roberto Vieira Duque, Antonio Carlos Ancelotti Junior

Publisher page

Abstract

One of the main current challenges in the development of materials is related to meet the structural industry demanding requirements and that are sustainable at the same time. This paper presents the composite mechanical characterization based on an innovative thermoplastic matrix reinforced by jute fibers. The composite was fabricated via VARTM (Vacuum Assisted Resin Transfer Molding) using jute fiber fabric in the 0/90° orientation. Several specimens were tested for uniaxial tension loading and their mechanical behavior was discussed. Also, the dynamic properties were evaluated with frequency variation and a master curve was constructed based on the WLF (Williams–Landel–Ferry) principle. Finally, fractographic evaluations of the fracture surfaces performed in a scanning electron microscope (SEM) confirm the quantitative characterization obtained from the mechanical analysis. The results obtained prove that the Jute/Elium® 150 composites can become a low-cost alternative methodology in the manufacture of more sustainable composites for the industry.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Federal de Itajubá, Itajubá, MG, Brazil

Mechanical Engineering Institute, Núcleo de Tecnologia em Compósitos, NTC, Brazil

Funding

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

References (43)

Show source-provided references
1. 10.1016/j.progpolymsci.2012.04.00310.1016/j.progpolymsci.2012.04.003 ↗
2. 10.1016/j.matdes.2014.01.04310.1016/j.matdes.2014.01.043 ↗
3. 10.1007/s10570-017-1280-310.1007/s10570-017-1280-3 ↗
4. 10.1201/978020350820610.1201/9780203508206 ↗
5. 10.1016/j.compositesb.2016.11.04510.1016/j.compositesb.2016.11.045 ↗
6. AL-Oqla FM · J Polym Environ · 2017 · 26 · 1
7. 10.3390/polym1006060810.3390/polym10060608 ↗
8. 10.1002/adv.2214210.1002/adv.22142 ↗
9. 10.1590/1980-5373-mr-2017-010410.1590/1980-5373-mr-2017-0104 ↗
10. 10.1016/j.compositesa.2015.08.03810.1016/j.compositesa.2015.08.038 ↗
11. Ding WD, Pervaiz M, Sain M. Cellulose-enabled polylactic acid (PLA) nanocomposites: recent developments and emerging trends, functional biopolymers. Berlin: Springer, 2018, pp. 183–216.10.1007/978-3-319-66417-0_7 ↗
12. 10.1016/j.compositesa.2016.12.02010.1016/j.compositesa.2016.12.020 ↗
13. 10.1007/s11837-015-1548-810.1007/s11837-015-1548-8 ↗
14. 10.15376/biores.9.3.4608-462110.15376/biores.9.3.4608-4621 ↗
15. Faris M · J Nat Fiber · 2016 · 13 · 651
16. ARKEMA. Elium®150 Technical Datasheet. Arkema Innovative Chemistry. [S.l.]. 2014.
17. Alguacil MC. Substitution of thermosets by thermoplastic resins in electrical insulation applications. Master’s thesis, Lulea Tekniska Universitet, Lulea, 2017
18. 10.3144/expresspolymlett.2009.6210.3144/expresspolymlett.2009.62 ↗
19. 10.1021/ja01619a00810.1021/ja01619a008 ↗
20. 10.1016/j.polymdegradstab.2011.11.00610.1016/j.polymdegradstab.2011.11.006 ↗
21. 10.1021/ma00162a01010.1021/ma00162a010 ↗
22. 10.1021/ma00196a02410.1021/ma00196a024 ↗
23. 10.1016/j.polymdegradstab.2011.09.00510.1016/j.polymdegradstab.2011.09.005 ↗
24. 10.1016/j.polymdegradstab.2009.06.01010.1016/j.polymdegradstab.2009.06.010 ↗
25. 10.1016/S0141-3910(02)00100-310.1016/S0141-3910(02)00100-3 ↗
26. 10.1021/ma00149a01010.1021/ma00149a010 ↗
27. 10.1149/1.325130810.1149/1.3251308 ↗
28. 10.1016/j.polymdegradstab.2007.10.01210.1016/j.polymdegradstab.2007.10.012 ↗
29. Ku H · Polym Compos · 2014 · 1
30. 10.1016/j.proeng.2013.01.07910.1016/j.proeng.2013.01.079 ↗
31. Greenhalgh ES · 2009
32. 10.1016/j.compositesb.2019.10708210.1016/j.compositesb.2019.107082 ↗
33. 10.1002/jbm.82024080610.1002/jbm.820240806 ↗
34. 10.1201/978142005313510.1201/9781420053135 ↗
35. 10.1080/0091403770807521810.1080/00914037708075218 ↗
36. 10.1002/pen.76008030210.1002/pen.760080302 ↗
37. 10.1007/s00170-019-04486-410.1007/s00170-019-04486-4 ↗
38. Sepe MP. Properties measured by DMA in dynamic mechanical analysis for plastics engineering. New York, USA: Plastic Design Library, 1998, p. 11.
39. 10.1016/S0921-5093(99)00602-410.1016/S0921-5093(99)00602-4 ↗
40. Van Gurp M · Rheol Bull · 1998 · 67 · 5
41. 10.1016/j.compscitech.2004.10.02310.1016/j.compscitech.2004.10.023 ↗
42. 10.1016/j.compositesb.2016.02.05510.1016/j.compositesb.2016.02.055 ↗
43. 10.1016/0010-4361(87)90360-010.1016/0010-4361(87)90360-0 ↗