journal article·2023-10

Efficacy of various structural forms of disentangled polyethylene laminates against low velocity impact

Mukesh Bajya, Abhijit Majumdar, Bhupendra Singh Butola, Raksh Vir Jasra

Publisher page

Abstract

Filament-based unidirectional laminates of para-aramid and ultra-high molecular weight polyethylene exhibit excellent impact resistance performance. This research explored the possibility of using disentangled polyethylene (DPE) tape, instead of filaments, as an alternative impact resistant material. The effects of laminate structure, binding resin content and processing temperature on the tensile and impact properties of cross-ply laminates prepared from DPE tape was investigated. Three types of cross-ply laminates prepared from tape, woven fabric of untwisted tape and woven fabric of twisted tape were explored. Tensile properties and low velocity impact resistance of laminates were evaluated. Laminate made from woven untwisted tape showed much lower impact energy absorption than cross-ply laminate, while the woven twisted tape based laminate performed the worst. Cross-ply laminates made with low resin content showed better tensile and impact resistance performances. Cross-ply laminates prepared at higher moulding temperature showed significantly enhanced impact energy absorption than its counterpart prepared at a lower temperature. Therefore, cross-ply laminate of DPE tape with low resin content is ideal for impact resistance applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Polymer crystallization and properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Textile & Fibre Engineering, Indian Institute of Technology Delhi, New Delhi, India

Reliance Technology Group, Reliance Industries Limited, Vadodara, India

Funding

Science and Engineering Research Board

References (64)

Show source-provided references
1. 10.1177/004051751990038410.1177/0040517519900384 ↗
2. 10.1177/089270571663711410.1177/0892705716637114 ↗
3. 10.1007/s10443-021-09905-y10.1007/s10443-021-09905-y ↗
4. 10.1177/004051751667112910.1177/0040517516671129 ↗
5. 10.1016/j.matdes.2012.07.06110.1016/j.matdes.2012.07.061 ↗
6. 10.1016/j.compstruct.2020.11294110.1016/j.compstruct.2020.112941 ↗
7. 10.1177/004051750809048710.1177/0040517508090487 ↗
8. 10.1002/app.2268010.1002/app.22680 ↗
9. 10.1016/B978-0-08-100406-7.00008-810.1016/B978-0-08-100406-7.00008-8 ↗
10. 10.1007/s10853-018-2055-410.1007/s10853-018-2055-4 ↗
11. 10.1080/00405167.2019.169258310.1080/00405167.2019.1692583 ↗
12. Product specification of SB51. 2011; 1–2.
13. 10.1177/152808371349891410.1177/1528083713498914 ↗
14. 10.1016/j.compstruct.2018.11.02810.1016/j.compstruct.2018.11.028 ↗
15. 10.1177/004051751666907510.1177/0040517516669075 ↗
16. 10.1177/089270571560468010.1177/0892705715604680 ↗
17. 10.1177/002199832093299110.1177/0021998320932991 ↗
18. 10.1177/004051751456611010.1177/0040517514566110 ↗
19. Bajaj P · Indian J Fibre Text Res · 1997 · 22 · 274
20. Toyobo Co. Ltd. Zylon® (PBO fibre) technical information, 2005, Osaka, Japan: Toyobo Co. Ltd. pp. 1–18.
21. 10.1111/j.1556-4029.2011.01832.x10.1111/j.1556-4029.2011.01832.x ↗
22. Nilakantan G · 7th Eur LS-DYNA Conf · 2009 · 1 · 1
23. 10.1016/j.compstruct.2020.11277610.1016/j.compstruct.2020.112776 ↗
24. Mansoori H · J Thermoplast Compos Mater · 2022 · 0 · 1
25. 10.1007/s10443-018-9716-y10.1007/s10443-018-9716-y ↗
26. 10.1016/j.compstruct.2019.11117910.1016/j.compstruct.2019.111179 ↗
27. 10.1016/j.compstruct.2017.07.01810.1016/j.compstruct.2017.07.018 ↗
28. 10.1177/004051751036318710.1177/0040517510363187 ↗
29. 10.1177/089270571770448510.1177/0892705717704485 ↗
30. 10.1007/s10443-020-09860-010.1007/s10443-020-09860-0 ↗
31. 10.1016/j.compositesb.2019.10772110.1016/j.compositesb.2019.107721 ↗
32. 10.1016/j.compositesa.2015.08.02210.1016/j.compositesa.2015.08.022 ↗
33. 10.1016/j.tws.2020.10699110.1016/j.tws.2020.106991 ↗
34. Chu Y
35. 10.1177/004051751245076510.1177/0040517512450765 ↗
36. 10.1016/j.apsusc.2017.02.10910.1016/j.apsusc.2017.02.109 ↗
37. 10.1007/s12221-019-8733-210.1007/s12221-019-8733-2 ↗
38. 10.1177/152808371142914410.1177/1528083711429144 ↗
39. 10.1177/0892705721102146410.1177/08927057211021464 ↗
40. 10.1016/j.compositesb.2019.10694910.1016/j.compositesb.2019.106949 ↗
41. 10.1016/j.dt.2020.11.00610.1016/j.dt.2020.11.006 ↗
42. 10.1016/j.matdes.2014.05.06910.1016/j.matdes.2014.05.069 ↗
43. 10.1007/s10853-016-0077-310.1007/s10853-016-0077-3 ↗
44. 10.1007/s10853-017-1482-y10.1007/s10853-017-1482-y ↗
45. 10.1016/j.ijimpeng.2021.10382410.1016/j.ijimpeng.2021.103824 ↗
46. 10.1016/j.progpolymsci.2020.10129010.1016/j.progpolymsci.2020.101290 ↗
47. 10.1021/ma402232c10.1021/ma402232c ↗
48. 10.1002/app.5018810.1002/app.50188 ↗
49. Satpathy US, Limited RI, Jasra RV, et al. Compact polymeric gel and fibre made therefrom. Alexandria, VA: USPTO, 2018, p. 9915012B2.
50. 10.1155/2017/743141910.1155/2017/7431419 ↗
51. 10.1007/BF0055605910.1007/BF00556059 ↗
52. 10.1021/ma200368910.1021/ma2003689 ↗
53. Kenneth C · 2012
54. Gandham SSR · 2015
55. 10.1021/ma200667m10.1021/ma200667m ↗
56. Dupont · 2013
57. Weedon GC, Harding KC, Owen L, et al. Fibrous high modulus ultra high molecular weight polyethylene tape for ballistic applicaitons, Non-US 7. Alexandria, VA: USPTO, 2012, p. 976.
58. 10.1016/j.dt.2019.12.00410.1016/j.dt.2019.12.004 ↗
59. 10.1177/0892705721101853210.1177/08927057211018532 ↗
60. 10.1177/00405175920620090210.1177/004051759206200902 ↗
61. Cunniff PM · 1999 · 1303
62. 10.1177/00405175580280040210.1177/004051755802800402 ↗
63. 10.1039/C9RA06447H10.1039/C9RA06447H ↗
64. Soft ballistic shield