Preparing poly styrene-co-acrylic acid and recycled waste magnetite composite from concrete industry as a printing ink
Source abstract
Abstract
The main element of electrophotographic (EP) printing and copying devices is a polymeric composite called toner and one of the most significant components of toner composite is an iron oxide (magnetite). Magnetite, which is applied as a colorant and additive for toner is the main mineral able to develop an electrical charge on the printing procedure. Although there are several ways to produce magnetite, given the dearth of resources and environmental aspect, it is safer to practice recycling and greener method. In the present study, an encouraging way to reuse the magnetite particles as a byproduct of the preparation of micro silica in the concrete industry was described. The obtained magnetite was then utilized as the charge control agent to produce magnetite/carbon black/styrene co-butyl acrylate composite microspheres by green emulsion aggregation method, which is used as toner in the printing procedure. Characterization of toner and recovered magnetite was done by X-ray Powder Diffraction (XRD), Atomic Gradient Force Magnetometry (AGFM), Particle Size Analysis (PSA), Differential Scanning Calorimetry (DSC), and Scanning Electron Microscopy with Energy Dispersive X-Ray (SEM-EDX). The results supported the fact that the produced toner composite by recycled waste magnetite show suitable characteristics comparing to an industrial toner.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Recycling and Waste Management Techniques · Microplastics and Plastic Pollution
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Printing Science and Technology, Institute for Color Science and Technology, Tehran, Iran
Formulation and Development of Applications of Chemical and Polymeric Compounds Research Group, Chemical, Polymeric and Petrochemical Technology Development Research Division, Research Institute of Petroleum Industry, Tehran, Iran
References (33)
Show source-provided references
1. Marshall G · 1997
2. 10.1063/1.489712710.1063/1.4897127 ↗
3. 10.1021/acssuschemeng.7b0032810.1021/acssuschemeng.7b00328 ↗
4. 10.1002/352760209710.1002/3527602097 ↗
5. Buschow KHJ · 2008
6. 10.1177/089270571879654210.1177/0892705718796542 ↗
7. Ataeefard M · World J · 2014 · 2014 · 706367
8. Meisen U · J Imaging Sci Technol · 2000 · 44 · 50810.2352/J.ImagingSci.Technol.2000.44.6.art00007 ↗
9. 10.1007/s11671-008-9174-910.1007/s11671-008-9174-9 ↗
10. 10.1007/s10163-017-0656-710.1007/s10163-017-0656-7 ↗
11. 10.1016/j.jmmm.2009.09.06410.1016/j.jmmm.2009.09.064 ↗
12. 10.1021/ja026501x10.1021/ja026501x ↗
13. 10.3390/nano709024310.3390/nano7090243 ↗
14. 10.3390/ijerph1606106010.3390/ijerph16061060 ↗
15. 10.1016/j.jclepro.2017.06.24910.1016/j.jclepro.2017.06.249 ↗
16. Laria JG · Thermoplast Compos Mater
17. Gite BE · Advance construction material—micro silica in concrete
18. Friede B · 10
19. Guide for the Use of Silica Fume in Concrete, ACI Committee 234, 2000. http://dl.mycivil.ir/dozanani/ACI/ACI%20234R-06%20Guide%20for%20the%20Use%20of%20Silica%20Fume%20in%20Concrete_MyCivil.ir.pdf
20. 10.1134/S0965545X1905003110.1134/S0965545X19050031 ↗
21. 10.1177/002199831453606910.1177/0021998314536069 ↗
22. 10.1177/002199831982815410.1177/0021998319828154 ↗
23. 10.1515/gps-2019-004110.1515/gps-2019-0041 ↗
24. 10.1515/polyeng-2015-052510.1515/polyeng-2015-0525 ↗
25. 10.1007/s00396-018-4282-210.1007/s00396-018-4282-2 ↗
26. Mohammadia P
27. 10.1007/s00396-017-4154-110.1007/s00396-017-4154-1 ↗
28. 10.1088/0957-4484/19/25/25560610.1088/0957-4484/19/25/255606 ↗
29. Shan J · Mater Sci Technol · 2016 · 32 · 60210.1179/1743284715Y.0000000122 ↗
30. Einarsson F · Ann Trans Nordic Rheology Society · 2002 · 10 · 155
31. Ohta N · 2006
32. Zhao Y · Thermoplast Compos Mater · 2019 · 89 · 3098
33. 10.1007/s12221-016-5445-810.1007/s12221-016-5445-8 ↗