Mechanical behavior and microstructural analysis of rotomolded LLDPE composites filled with surface-modified peanut shell powder
Source abstract
Abstract
This research explores the synthesis of sustainable polymer composites through the incorporation of alkali-treated peanut shell powder (TPSP) in linear low-density polyethylene (LLDPE) using rotational molding. The peanut shells were treated with 5% NaOH solution, and FTIR analysis followed by thermogravimetric analysis proved the elimination of non-cellulosic content such as lignin and hemicellulose. Composites of TPSP concentration in the range of 3-15 wt% were analyzed for mechanical and morphological properties. Tensile strength fell from 13.82 MPa to 7.51 MPa with increasing TPSP concentration, whereas stiffness increased substantially. The tensile modulus rose by 93% (395.06 MPa) at 9 wt%, and impact strength rose by 94% (107.22 J/m) up to 9 wt%, before reducing at higher concentrations. Flexural modulus reached its peak at 9 wt% (482.71 MPa), with an increase of 42%, and maintained a 21% increase at maximum loading. Microstructural analysis proved excellent fiber dispersion and matrix adhesion in the range of 3-9 wt%, with agglomeration at higher concentration. The research concludes that 9 wt% TPSP achieves an optimal balance of mechanical properties and processability as a sustainable reinforcement for LLDPE composites in applications demanding high stiffness and impact resistance. This research identifies TPSP as cost-effective, eco-friendly filler for rotational molding.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Nanocomposite Films for Food Packaging · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Parul University
Institute of Infrastructure Technology Research and Management
References (53)
Show source-provided references
1. 10.1016/B978-188420785-3.50004-610.1016/B978-188420785-3.50004-6 ↗
2. Torres FG. Rotational Moulding of Polymers. In: Thomas S. Weimin Y. (eds) Advances in Polymer Processing: From Macro- To Nano- Scales. Cambridge UK: Woodhead Publishing Ltd 2009 pp. 204–225. DOI: 10.1533/9781845696429.2.204.10.1533/9781845696429.2.204 ↗
3. Balani K, Verma V, Agarwal A, et al. Physical, Thermal, and Mechanical Properties of Polymers. Hoboken, NJ: John Wiley & Sons, Inc, 2015.
4. 10.3139/9783446412866.00310.3139/9783446412866.003 ↗
5. 10.1533/9780857092229.110.1533/9780857092229.1 ↗
6. 10.3139/9783446412866.00210.3139/9783446412866.002 ↗
7. 10.3139/9781569908235.011.10.3139/9781569908235.011. ↗
8. Crawford RJ Throne JL. Rotational molding technology. https://books.google.com.mx/books?id=7UZ8fnWjCVEC&lpg=PP1&hl=es&pg=PP1#v=onepage&q&f=false
9. Dodge PT Andrzejewski S Mahan D. Rotational molding. Encyclopedia of Polymer Science and Technology. Bikales N .M. (Ed. Vol. 11 3rd Edition John Wiley & Sons New Jersey (2004).10.1002/0471440264.pst326 ↗
10. Khanna P, Ramkumar PL, Gupta N. A review of polymers, fibre additives and fibre treatment techniques used in rotational moulding process. High Perform Polym 2022; 0: 0.
11. 10.1080/10426914.2020.177993410.1080/10426914.2020.1779934 ↗
12. 10.1088/1757-899X/251/1/01208610.1088/1757-899X/251/1/012086 ↗
13. 10.1007/978-981-15-7827-4_6110.1007/978-981-15-7827-4_61 ↗
14. 10.1016/J.MATPR.2021.08.33110.1016/J.MATPR.2021.08.331 ↗
15. 10.1016/j.compositesa.2015.08.03810.1016/j.compositesa.2015.08.038 ↗
16. 10.1002/masy.20085021710.1002/masy.200850217 ↗
17. 10.1177/073168441245924810.1177/0731684412459248 ↗
18. 10.1515/SECM.2008.15.1.4310.1515/SECM.2008.15.1.43 ↗
19. 10.1177/096739112095324610.1177/0967391120953246 ↗
20. 10.1007/s12046-021-01566-810.1007/s12046-021-01566-8 ↗
21. 10.1051/e3sconf/20201870500310.1051/e3sconf/202018705003 ↗
22. Taylor P, Ortega Z, Monzón MD, et al. Materials and manufacturing processes banana and abaca fiber-reinforced plastic composites obtained by rotational molding process banana and abaca fiber-reinforced plastic composites obtained by rotational molding process, Materials and Manufacturing Processes 2013; 28: 37–41.
23. 10.1080/09276440.2016.118455610.1080/09276440.2016.1184556 ↗
24. Cisneros-López EO, González-López ME, Pérez-Fonseca AA, et al. Fiber surface treatment as an approach to increase fiber content in agave-LMDPE composites produced by rotomolding. Annu Tech Conf - Antec, Conf Proc. 2016; 1729–1733.
25. Khanna P Ramkumar PL. Assessing feasibility of peanut shell powder/linear low-density polyethylene for rotational moulding process. Sādhanā. 2024 22;49(3):239.10.1007/s12046-024-02591-z ↗
26. 10.1080/03602559.2018.147172010.1080/03602559.2018.1471720 ↗
27. 10.1080/00222348.2024.241115410.1080/00222348.2024.2411154 ↗
28. 10.1016/j.ijbiomac.2018.12.05610.1016/j.ijbiomac.2018.12.056 ↗
29. 10.1177/152808372092936310.1177/1528083720929363 ↗
30. 10.1177/073168441880202210.1177/0731684418802022 ↗
31. 10.1080/15440478.2022.213425710.1080/15440478.2022.2134257 ↗
32. 10.1002/app.5623710.1002/app.56237 ↗
33. 10.12693/APhysPolA.135.104210.12693/APhysPolA.135.1042 ↗
34. 10.3390/jcs708030710.3390/jcs7080307 ↗
35. 10.1177/0892705724130553810.1177/08927057241305538 ↗
36. 10.1177/089270571039311410.1177/0892705710393114 ↗
37. 10.1177/073168441141076110.1177/0731684411410761 ↗
38. 10.1016/j.compositesb.2016.03.00910.1016/j.compositesb.2016.03.009 ↗
39. 10.1016/j.compositesb.2020.10841010.1016/j.compositesb.2020.108410 ↗
40. Punnadiyil RK, Sreejith MP, Purushothaman E. Isolation of microcrystalline and nano cellulose from peanut shells. J Chem Pharmaceut Sci 2016; 2016: 12–16.
41. 10.1177/2041247921100876110.1177/20412479211008761 ↗
42. Kinan A Rafi J Fawaz A. Evolution in polymer technology journal preparation of LLDPE-PP-coconut shells powder composite materials and characterization of their mechanical properties. https://chembiopublishers.com/submit-manuscript.php
43. 10.1002/pc.2362710.1002/pc.23627 ↗
44. 10.1177/089270571247026710.1177/0892705712470267 ↗
45. 10.1177/073168441351154810.1177/0731684413511548 ↗
46. 10.1177/089270570809185810.1177/0892705708091858 ↗
47. 10.1177/152808371876992610.1177/1528083718769926 ↗
48. 10.1177/09673911180260040410.1177/096739111802600404 ↗
49. 10.3390/POLYM1401019310.3390/POLYM14010193 ↗
50. 10.1177/02624893180370020110.1177/026248931803700201 ↗
51. 10.1177/09673911040120080710.1177/096739110401200807 ↗
52. 10.3390/cryst1109109910.3390/cryst11091099 ↗
53. Fletes RCV, López EOC, Sánchez FJM, et al. Morphological and mechanical properties of bilayers wood-plastic composites and foams obtained by rotational molding. Polymers 2020; 12: 1–19.