Recent Developments Encompassing Non-Isothermal/Isothermal Liquid Composite Molding Process Modeling/Analysis: Physically Accurate, Computationally Effective, and Affordable Simulations and Validations
Source abstract
Abstract
The mathematical and associated computational modeling and analysis of mold filling, heat transfer, and polymerization reaction kinetics in Resin Transfer Molding (RTM) are quite complex and not only require accurate computational approaches to capture the process physics during the simulations, but also must permit complex geometric configurations to be effectively analyzed. The process simulations at a macroscopic level require the representative macroscopic constitutive behavior which can be predicted from a microscopic analysis of the representative volume element (RVE) of the fiber preform configurations. This is first presented here for purposes of illustration in reference to determination of the preform flow permeabilities. Next, an effective integrated micro/macro approach and developments including a viable flow solution modeling and analysis methodology with emphasis on providing improved physical accuracy of solutions and computational advantages are described for the transient flow progression inside a mold cavity filled with a fiber preform under isothennal and non-isothermal flow conditions. The improved physical accuracy and the overall effectiveness of the new computational developments for realistic process modeling simulations are first demonstrated for isothermal conditions. Subsequently, the new integrated flow/ thermal methodology and developments are extended for non-isothermal conditions. The highly advective nature of the non-isothermal conditions involving thermal and polymerization reactions also require special numerical considerations and stabilization techniques and are also addressed here. Finally, validations and comparisons are presented with available analytical and experimental results whenever feasible. Emphasis is also placed upon demonstrations for practical engineering problems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Rheology and Fluid Dynamics Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Institute of Technology, University of Minnesota, 111 Church Street S.E., Minneapolis, MN 55455
U.S. Army Research Laboratory
References (55)
Show source-provided references
1. R. V. Mohan · 1995 · 1287
2. R. V. Mohan · 1996
3. R. V. Mohan
4. N. D. Ngo
5. 5. C. A. Fracchia. Numerical Simulation of Resin Transfer Mold Filling. Master's thesis, University of Illinois at Urbana-Champaign IL, 1990.
6. C. A. Fracchia · 157
7. M. V. Bruschke · 1769
8. M. V. Bruschke · SAMPE Quarterly · 1991 · 23 · 2
9. 10.1002/pc.75011061310.1002/pc.750110613 ↗
10. 10.1002/fld.165019070410.1002/fld.1650190704 ↗
11. 10.1002/adv.1993.06012040110.1002/adv.1993.060120401 ↗
12. R. V. Mohan
13. P. W. Chung · 315
14. 14. H. Darcy. Les Fontaines Publiques de la Ville de Dijon . Delmont. Paris, 1856.
15. A. D. Scheidegger · 1957
16. 10.1016/0300-9467(75)88013-010.1016/0300-9467(75)88013-0 ↗
17. P. C. Carman · 1956
18. H. C. Brinkman · Applied Science Research · 1947 · 27
19. 10.1017/S002211207200120X10.1017/S002211207200120X ↗
20. 10.1017/S002211206700137510.1017/S0022112067001375 ↗
21. 10.1002/aic.69020032310.1002/aic.690200323 ↗
22. 10.1002/aic.69005031510.1002/aic.690050315 ↗
23. 10.1177/08927057940070030310.1177/089270579400700303 ↗
24. 10.1007/BF0036988210.1007/BF00369882 ↗
25. 10.1016/0045-7825(94)90018-310.1016/0045-7825(94)90018-3 ↗
26. 10.21236/ADA09562910.21236/ADA095629 ↗
27. H. I. Ene · 1990 · 223
28. 10.1016/0301-9322(82)90029-510.1016/0301-9322(82)90029-5 ↗
29. 10.1177/00219983920260080210.1177/002199839202600802 ↗
30. A. L. Berdichevsky · 1203
31. 10.1002/pc.75014020710.1002/pc.750140207 ↗
32. 10.1177/00219983930270100310.1177/002199839302701003 ↗
33. 10.1002/pc.75014050410.1002/pc.750140504 ↗
34. P. W. Chung
35. 10.1115/1.363644610.1115/1.3636446 ↗
36. F. Lene · Composite Mt Iaterial Technology · 1992 · 45 · 97
37. J. Ni · 285
38. 10.1002/pen.76026201310.1002/pen.760262013 ↗
39. P. C. Hughes · 1986
40. 10.1179/mst.1988.4.3.24010.1179/mst.1988.4.3.240 ↗
41. 10.1002/nme.162030041610.1002/nme.1620300416 ↗
42. 10.1016/0021-9991(81)90145-510.1016/0021-9991(81)90145-5 ↗
43. R. A. Stoehr · 1988 · 733
44. 10.1016/0307-904X(94)90165-110.1016/0307-904X(94)90165-1 ↗
45. P. Hill · Road & Track · 1997 · 48 · 74
46. 10.1016/0263-8223(94)90072-810.1016/0263-8223(94)90072-8 ↗
47. 10.1002/pc.75016060810.1002/pc.750160608 ↗
48. M. R. Kamal · 187
49. 10.1002/pen.76013011010.1002/pen.760130110 ↗
50. 50. V. M. Gonzalez. "Studies of Reactive Polymer Processing with Fiberglass Reinforcement." Ph.D. thesis, University of Minnesota, 1983.
51. 51. M. V. Bruschke. A Predictive Model for Permeability and Non-Isothermal Flow of Viscous and Shear-Thinning Fluids in Anisotropic Fibrous Media. Ph.D. thesis. University of Delaware. 1992.
52. 52. Y. T. Chen. Resin Transfer Molding of Polycyanate: Chemorheology, Molding Experiments and Wetting Visualization. Ph.D. thesis. University of Minnesota, March 1993.
53. J. M. Castro · 434
54. 10.1016/0045-7825(82)90071-810.1016/0045-7825(82)90071-8 ↗
55. A. W. Chan · Journal of Materials Processing and Manufacturing Science · 1992 · 105