journal article·1996-10

Effects of Impact Modification on the Mechanical Properties of Wood-Fiber Thermoplastic Composites with High Impact Polypropylene (HIPP)

Byung-Dae Park, John J. Balatinecz

Publisher page

Abstract

This paper reports on the effects of impact modification on the mechanical properties of wood-fiber thermoplastic composites with high-impact polypropylene (HIPP). Homo polypropylene (PP) was modified through its melt blending with HIPP to obtain an inherently tough matrix resin for PP/wood-fiber composites. The resin modification improved the impact strength of the composites, while it reduced the stiffness and strength properties acquired by the addition of wood-fibers. The requirements of plane strain fracture toughness were not satisfied in this study. In order to compensate the nonplane strain fracture toughness, the specimen strength ratio was used as a comparative measure of fracture toughness. The strength ratio depended on impact modifier levels as well as on wood-fiber concentrations. The work of fracture measured as the area under the load-displacement curve increased with impact modifier levels except at 40% wood-fiber concentration. Microstructural probing showed a degree of wood-fiber alignment in the skin and core of injection-molded specimens and provided some insight into the slight increase in the impact strength of composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Forestry, University of Toronto, Toronto, Ont., MSS 3B3, Canada; Department of Wood Science, Faculty of Forestry and Geomatics, Laval University, Ste-Foy, Quebec, GIK 7P4, Canada. Tel: (418)683-2499.

Faculty of Forestry, University of Toronto, Toronto, Ont., MSS 3B3, Canada

References (39)

Show source-provided references
1. Waterman, N. A. · Mater. in Eng. Appl. · 1978 · 1 · 74
2. Michell, A. J. · APPITA · 1986 · 39 · 223
3. 3. Panshin, A. J. and C. de Zeeuw. 1980. Textbook of Wood Technology. 4th Ed., New York: McGraw-Hill, p. 127-127.
4. Balatinecz, J. J. · 1992
5. 10.1002/pc.75010020210.1002/pc.750100202 ↗
6. 10.1557/PROC-197-6710.1557/PROC-197-67 ↗
7. 10.1002/pen.76024150410.1002/pen.760241504 ↗
8. Kishi, H. · Mokuzai Gakkaishi · 1988 · 34 · 133
9. 10.1002/app.1991.07042030710.1002/app.1991.070420307 ↗
10. 10.1080/0091403850807865110.1080/00914038508078651 ↗
11. 10.1002/pc.75006041110.1002/pc.750060411 ↗
12. 10.1080/0091403910803151910.1080/00914039108031519 ↗
13. 10.1016/0266-3538(86)90072-210.1016/0266-3538(86)90072-2 ↗
14. 14. Vu-Khanh, T. 1990. Proceedings of the American Society for Composites-Fifth Technical Conference, Michigan, p. 309-309.
15. 15. Folkes, M. J. 1982. Short Fibre Reinforced Thermoplastics. New York: Research Studies Press, p. 24-24.
16. 10.1002/pc.75005030810.1002/pc.750050308 ↗
17. 10.1002/pc.75013031210.1002/pc.750130312 ↗
18. 18. Nielsen, L.E. 1974. Mechanical Properties of Polymers and Composites, Vol. 2. New York: Marcel Dekker, p. 308-308.
19. 10.1016/B978-0-444-87286-9.50010-310.1016/B978-0-444-87286-9.50010-3 ↗
20. 20. Knott, J. F. 1973. Fundamentals of Fracture Mechanics. London: Butterworth & Co. Ltd., p. 19-19.
21. 10.1080/0091403840808026810.1080/00914038408080268 ↗
22. 10.1016/0032-3861(79)90039-910.1016/0032-3861(79)90039-9 ↗
23. 10.1002/pen.76015090610.1002/pen.760150906 ↗
24. 24. Gerteisen, S. R. and K. J. 1986. Proceedings of Intern. Symposium on Composite Materials and Structures, Beijing, China, p. 644-644.
25. Shipley, B. · 1992
26. 26. Thomas, G., D. Rodger and R. T. Woodhams. 1982. Proceedings of Canadian Fracture Conference, 8, Alton, Ontario, p. 104-104.
27. 10.1002/pen.76030110910.1002/pen.760301109 ↗
28. 10.1016/B978-0-08-024231-6.50009-X10.1016/B978-0-08-024231-6.50009-X ↗
29. 29. Woodhams, R. T., S. Law and J. J. Balatinecz. 1990. Proceedings of Wood Adhesives Symposium, p. 177-177.
30. 10.1016/0032-3861(84)90337-910.1016/0032-3861(84)90337-9 ↗
31. 31. Rifi, M. R., H. K. Ficker and D. A. Walker. 1987. Modem Plastics, February, p. 2-2.
32. 32. Svec, P., L. Rosik, R. Z. Horak and F. Vecerka. 1990. Styrene-Based Plastics and Thleir Modification. New York: Ellis Horwood, (1977), p. 119-119.
33. 10.1007/978-94-017-5349-4_610.1007/978-94-017-5349-4_6 ↗
34. 34. Succop, G. and W. F. Brown, Jr. 1977. ASTM STP 632, p. 179-179.
35. Moore, D. R. · Plast. Rubber Pro. Appl. · 1988 · 1 · 121
36. 10.1016/0142-9418(85)90020-010.1016/0142-9418(85)90020-0 ↗
37. 10.1002/pc.75006041010.1002/pc.750060410 ↗
38. 38. Hegler, R. P. and G. Menning. 1985. ANTEC'85, p. 781-781.10.1097/00000446-198507000-00011 ↗
39. 10.1007/BF0055150810.1007/BF00551508 ↗