Preparation and characterization of lignocellulosic material filled polyethylene composite foams
Source abstract
Abstract
In this study, the effects of foaming agent loading on the physical, mechanical and morphological properties of composites were investigated. Composites based on high-density polyethylene, rice husk flour, foaming agent and coupling agent were melt compounded using twin-screw extruder. The samples were foamed via a batch process using a compression molding machine at180°C. The mass ratio of rice husk flour to high-density polyethylene was controlled at 40:60 for all blends. The concentration was set to vary between 0, 1, 2 and 3 per hundred resins (phr) for foaming agent. The amount of coupling agent was fixed at 2% for all formulations. Results indicated that the cell size and average cell density of samples increased with an increase of foaming agent content. Also, by increasing the chemical foaming agent content the density, tensile modulus and flexural strength of the rice husk flour filled high-density polyethylene composites were decreased. However, the water absorption and thickness swelling of the composites increased by addition of the foaming agent. Scanning electron microscopy confirmed that the chemical foaming agent had a significant effect on the density reduction of foamed composites. This project has shown that the strategy of foaming wood plastic composites can be a good solution to overcome the high density of these composites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Foaming and Composites · biodegradable polymer synthesis and properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Wood and Paper Science and Technology, Islamic Azad University, Chalous Branch, Mazandaran, Iran
References (14)
Show source-provided references
1. Bledzki AA · Journal of Polymer Science · 1999 · 24 · 221
2. Rowell RR · Journal of Composite · 1997 · 18 · 23
3. Park CC · Journal of Polymer Engineering Science · 2005 · 38 · 212
4. Lee YH (2008). Foaming of wood flour/polyolefin/layered silicate composites, Ph.D. Thesis, Faculty of Forestry, University of Toronto.
5. Guo G, Rizivi GG, Park CCWood-Polymer Composite Foams, Wood Polymer Composite. Woodhead Pulbishing Limited: England, 2008, 227–253.10.1533/9781845694579.227 ↗
6. 10.1002/pen.1134510.1002/pen.11345 ↗
7. Schut JH · Plastic Technology · 2001
8. 10.1002/vnl.1005810.1002/vnl.10058 ↗
9. 10.1002/app.2168510.1002/app.21685 ↗
10. Bledzki AA · Holz Journal · 2005 · 63 · 30
11. Park CC · Journal of Ploymer Engineering Science · 2005 · 38 · 212
12. 10.1016/j.compositesa.2005.08.01010.1016/j.compositesa.2005.08.010 ↗
13. 10.1016/S1464-391X(02)80114-310.1016/S1464-391X(02)80114-3 ↗
14. 10.1002/mame.20060040610.1002/mame.200600406 ↗