Thermal, mechanical, dielectric, and morphological study of dielectric filler–based thermoplastic nanocomposites for electromechanical applications
Source abstract
Abstract
Dielectric nanocomposite elastomers based on poly(styrene-ethylene/butylene-styrene) (SEBS) and SEBS-grafted-maleic anhydride (SEBS-g-MA) with barium titanate (BT) suitable for electroactive applications were successfully manufactured by using two corotating twin extrusion systems. The main purpose of the work was to investigate the thermal, mechanical, dielectric, and morphological effects of additives on SEBS and SEBS-g-MA to widen their applications for electroactive applications using fast and more cost-effective simple production process. The morphological characterization showed a good and bad dispersion of BT into SEBS-g-MA and SEBS with 34.9% and −3% dielectric permittivity change in SEBS-g-MA and SEBS upon addition of 10 wt% BT. In addition, dielectric permittivity change, thermal change (enthalpy relaxation and thermal transitions), and mechanical (Young’s modulus, hysteresis loss under multiple stress cycles, storage modulus, loss modulus, and tan δ) properties of elastomers were found to be a function of additive concentration, compatibility and interaction between elastomers and additive type, orientation of additives, and reinforcing factors of additives in elastomers. A simple and effective modeling technique was used to demonstrate the effects of dielectric properties on nanocomposites due to poor dispersion of additives.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Convergent Technology Research Group (CTRG), Department of Engineering Technology, Waterford Institute of Technology (WIT), Cork Road, Waterford, Ireland
Centre for Industrial Service and Design (CISD), Athlone Institute of Technology (AIT), Athlone, Ireland
Applied Polymer Technology (APT), Athlone Institute of Technology (AIT), Athlone, Ireland
Faculty of Engineering, Thammasat University, Bangkok, Thailand
Funding
Waterford Institute of Technology Ph.D. scholarship program
References (53)
Show source-provided references
1. Kear KE. Structure of thermoplastic elastomers. In: Developments in thermoplastic elastomers. Smithers Rapra Review Reports, 14(10), 2003, pp. 3–6.
2. 10.3144/expresspolymlett.2007.7510.3144/expresspolymlett.2007.75 ↗
3. Stoyanov H (2011) Soft nanocomposites with enhanced electromechanical response for dielectric elastomer actuators. PhD Thesis, University of Potsdam, Patsdam.
4. 10.1002/adma.20060264410.1002/adma.200602644 ↗
5. 10.1016/S0928-4931(00)00128-410.1016/S0928-4931(00)00128-4 ↗
6. 10.1126/science.287.5454.83610.1126/science.287.5454.836 ↗
7. Koo CM · 2012
8. 10.1039/c2jm34541b10.1039/c2jm34541b ↗
9. 10.1080/08327823.2010.1168977810.1080/08327823.2010.11689778 ↗
10. 10.1016/j.polymertesting.2015.08.00110.1016/j.polymertesting.2015.08.001 ↗
11. 10.1038/nmat283410.1038/nmat2834 ↗
12. 10.1016/S0925-8388(97)00068-610.1016/S0925-8388(97)00068-6 ↗
13. 10.1016/j.matdes.2006.12.01610.1016/j.matdes.2006.12.016 ↗
14. 10.1002/marc.20070003310.1002/marc.200700033 ↗
15. 10.1002/marc.20090042510.1002/marc.200900425 ↗
16. 10.1103/PhysRevLett.99.04780110.1103/PhysRevLett.99.047801 ↗
17. Poudel A · Int J Mater Mech Manuf · 2016 · 4 · 237
18. 10.1186/1556-276X-8-13210.1186/1556-276X-8-132 ↗
19. 10.1063/1.315455310.1063/1.3154553 ↗
20. 10.1109/TDEI.2012.621510010.1109/TDEI.2012.6215100 ↗
21. 10.1007/s13233-012-0011-810.1007/s13233-012-0011-8 ↗
22. 10.1016/j.compscitech.2012.11.01510.1016/j.compscitech.2012.11.015 ↗
23. 10.1016/S0032-3861(96)00466-110.1016/S0032-3861(96)00466-1 ↗
24. Donth EJ · 1993
25. 10.1016/j.compscitech.2014.04.01210.1016/j.compscitech.2014.04.012 ↗
26. 10.1103/PhysRevB.52.1247710.1103/PhysRevB.52.12477 ↗
27. 10.1023/A:101861360016910.1023/A:1018613600169 ↗
28. 10.1063/1.291298510.1063/1.2912985 ↗
29. 10.1016/j.physb.2013.10.00910.1016/j.physb.2013.10.009 ↗
30. El Hasnaoui M · Optoelectron Adv Mater-Rapid Commun · 2012 · 6 · 610
31. 10.1016/j.matchemphys.2012.05.06010.1016/j.matchemphys.2012.05.060 ↗
32. 10.1016/j.polymer.2006.12.03010.1016/j.polymer.2006.12.030 ↗
33. Roylance D · 2001
34. 10.1016/j.ijsolstr.2008.12.02510.1016/j.ijsolstr.2008.12.025 ↗
35. 10.5254/1.354691410.5254/1.3546914 ↗
36. 10.1021/cm980448n10.1021/cm980448n ↗
37. 10.1016/S1359-0286(02)00073-610.1016/S1359-0286(02)00073-6 ↗
38. 10.1016/j.progpolymsci.2010.12.00410.1016/j.progpolymsci.2010.12.004 ↗
39. 10.1208/pt07048710.1208/pt070487 ↗
40. 10.1002/pen.1131710.1002/pen.11317 ↗
41. Kazarian S. Polymer processing with supercritical fluids. polymer science series cc/c of vysokomolekuliarnye soedineniia. 2000; 42(1): 78–101.
42. 10.1021/ba-1994-023910.1021/ba-1994-0239 ↗
43. 10.1021/ma00122a01110.1021/ma00122a011 ↗
44. 10.1021/ma702236410.1021/ma7022364 ↗
45. 10.1002/app.1962.07006190610.1002/app.1962.070061906 ↗
46. 10.1016/S0032-3861(03)00094-610.1016/S0032-3861(03)00094-6 ↗
47. 10.1021/jf049960l10.1021/jf049960l ↗
48. 10.1002/047001114910.1002/0470011149 ↗
49. 10.1021/ma990268e10.1021/ma990268e ↗
50. Munteanu S · J Optoelectron Adv mater · 2005 · 7 · 3135
51. 10.1016/j.polymer.2005.02.07610.1016/j.polymer.2005.02.076 ↗
52. 10.3390/polym204055410.3390/polym2040554 ↗
53. 10.1039/c1jm10420a10.1039/c1jm10420a ↗