journal article·2017-12

Unmodified multi-wall carbon nanotubes in polylactic acid for electrically conductive injection-moulded composites

Pauline Rivière, Tiina E Nypelö, Michael Obersriebnig, Henry Bock, Marcus Müller, Norbert Mundigler, Rupert Wimmer

Publisher page

Abstract

Tailoring the properties of natural polymers such as electrical conductivity is vital to widen the range of future applications. In this article, the potential of electrically conducting multi-wall carbon nanotube (MWCNT)/polylactic acid (PLA) composites produced by industrially viable melt mixing is assessed simultaneously to MWCNT influence on the composite’s mechanical strength and polymer crystallinity. Atomic force microscopy observations showed that melt mixing achieved an effective distribution and individualization of unmodified nanotubes within the polymer matrix. However, as a trade-off of the poor tube/matrix adhesion, the tensile strength was lowered. With 10 wt% MWCNT loading, the tensile strength was 26% lower than for neat PLA. Differential scanning calorimetric measurements indicated that polymer crystallization after injection moulding was nearly unaffected by the presence of nanotubes and remained at 15%. The resulting composites became conductive below 5 wt% loading and reached conductivities of 51 S m −1 at 10 wt%, which is comparable with conductivities reported for similar nanocomposites obtained at lab scale.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Agrobiotechnology, Institute of Natural Materials Technology, IFA-Tulln, University of Natural Resources and Life Sciences, Vienna, Austria

Department of Chemistry, University of Natural Resources and Life Sciences, Vienna, Austria

Department of Material Sciences and Process Engineering, Institute of Wood Technology and Renewable Materials, University of Natural Resources and Life Sciences, Vienna, Austria

Institute of Chemical Sciences, Heriot Watt University, Edinburgh, UK

University of Applied Forest Sciences Rottenburg, Rottenburg am Neckar, Germany

References (52)

Show source-provided references
1. 10.3390/ma203091110.3390/ma2030911 ↗
2. 10.1016/j.tifs.2011.01.00710.1016/j.tifs.2011.01.007 ↗
3. European Bioplastics and Institute for Bioplastics and Biocomposites. Bioplastics market grows above average between 2012 and 2017, www.en.european-bioplastics.org/wp-content/uploads/2013/12/EuBP_market_data_2012.pdf (2013, accessed 24 June 2014).
4. Leute U. Kunststoffe und EMV Elektromagnetische Verträglichkeit mit leitfähigen Kunststoffen. Vol. 3. Renningen: Kontakt and Studium Band 678 expertverlag, 2014, pp. 61, 69–78, 103, 115.
5. 10.1021/nn304410w10.1021/nn304410w ↗
6. 10.1515/polyeng.2011.00410.1515/polyeng.2011.004 ↗
7. 10.1016/j.matdes.2006.03.00810.1016/j.matdes.2006.03.008 ↗
8. 10.1021/ar010151m10.1021/ar010151m ↗
9. 10.1016/j.progpolymsci.2010.07.00510.1016/j.progpolymsci.2010.07.005 ↗
10. 10.1016/j.carbon.2008.09.03910.1016/j.carbon.2008.09.039 ↗
11. 10.1016/j.progpolymsci.2012.02.00210.1016/j.progpolymsci.2012.02.002 ↗
12. 10.1038/354056a010.1038/354056a0 ↗
13. 10.1163/156855405314880710.1163/1568554053148807 ↗
14. 10.1016/j.compositesb.2014.01.04810.1016/j.compositesb.2014.01.048 ↗
15. 10.1016/j.polymer.2008.06.01010.1016/j.polymer.2008.06.010 ↗
16. 10.1016/j.polymer.2007.12.02410.1016/j.polymer.2007.12.024 ↗
17. 10.1002/adma.20090154510.1002/adma.200901545 ↗
18. 10.1016/j.compscitech.2007.08.03110.1016/j.compscitech.2007.08.031 ↗
19. 10.3144/expresspolymlett.2010.3710.3144/expresspolymlett.2010.37 ↗
20. 10.1016/j.physe.2008.02.00110.1016/j.physe.2008.02.001 ↗
21. 10.1002/masy.20075011010.1002/masy.200750110 ↗
22. 10.1088/1757-899X/40/1/01202010.1088/1757-899X/40/1/012020 ↗
23. 10.1002/978352764521310.1002/9783527645213 ↗
24. 10.1016/S0142-9418(96)00049-910.1016/S0142-9418(96)00049-9 ↗
25. 10.1016/j.jpcs.2007.10.06010.1016/j.jpcs.2007.10.060 ↗
26. 10.1002/masy.20055062510.1002/masy.200550625 ↗
27. 10.1002/pola.2677810.1002/pola.26778 ↗
28. 10.1016/j.polymer.2007.09.02010.1016/j.polymer.2007.09.020 ↗
29. 10.1016/j.tca.2010.08.00410.1016/j.tca.2010.08.004 ↗
30. 10.1016/j.progpolymsci.2009.09.00310.1016/j.progpolymsci.2009.09.003 ↗
31. 10.1016/j.polymer.2007.05.04010.1016/j.polymer.2007.05.040 ↗
32. 10.1002/pat.131210.1002/pat.1312 ↗
33. 10.1016/j.eurpolymj.2007.05.01010.1016/j.eurpolymj.2007.05.010 ↗
34. 10.1021/nl035009o10.1021/nl035009o ↗
35. 10.1016/j.polymer.2006.12.03510.1016/j.polymer.2006.12.035 ↗
36. 10.1016/S0039-6028(96)01591-910.1016/S0039-6028(96)01591-9 ↗
37. Sichina WJ. DSC as Problem solving too: measurement of percent crystallinity of thermoplastics. perkin elmer tm instruments, thermal analyses application note, http://www.perkinelmer.com/Content/applicationnotes/app_thermalcrystallinitythermoplastics.pdf (accessed 10 July 2014).
38. 10.1002/app.3081910.1002/app.30819 ↗
39. 10.1126/science.265.5176.121210.1126/science.265.5176.1212 ↗
40. Gregorova A · 2013 · 3
41. 10.1016/j.compscitech.2008.10.00510.1016/j.compscitech.2008.10.005 ↗
42. 10.1016/j.compscitech.2008.06.01810.1016/j.compscitech.2008.06.018 ↗
43. 10.1016/j.polymer.2004.10.04010.1016/j.polymer.2004.10.040 ↗
44. 10.1016/S0032-3861(03)00451-810.1016/S0032-3861(03)00451-8 ↗
45. 10.1016/S0032-3861(02)00151-910.1016/S0032-3861(02)00151-9 ↗
46. 10.1016/j.scriptamat.2007.05.03510.1016/j.scriptamat.2007.05.035 ↗
47. 10.1016/j.polymer.2003.12.01310.1016/j.polymer.2003.12.013 ↗
48. 10.1002/pssb.20066919910.1002/pssb.200669199 ↗
49. 10.5402/2012/49306510.5402/2012/493065 ↗
50. 10.1038/nmat118310.1038/nmat1183 ↗
51. 10.1016/j.cplett.2006.10.08810.1016/j.cplett.2006.10.088 ↗
52. 10.1002/mawe.20070020610.1002/mawe.200700206 ↗