journal article·2005-01Open access

Sheet Forming Studies using Low-cost Composites

Antonio F. Ávila, Fabrício G. Jabbur

Abstract

This paper focuses on formability study of recycled polymeric matrix composites. Two thermoplastics are selected to create the composite, i.e. polyethylene terephthalate (PET) and high density polyethylene (HDPE). The recycling process is thermo-mechanical, and no addition of co-polymers, anti-oxidants or additives is used. Two sets of composites were studied. For the first set a PET/HDPE composite with ratio 60/40 was prepared, while the second one was a PET/HDPE/fiber glass composite. The PET/HDPE resulting matrix has the same aspect ratio as the first one and the final configuration matrix/fiber has a 70/30 relationship. The forming limit diagram (FLD) was obtained by following the methodology proposed by Bhattacharyya and his colleagues. The obtained results are very encouraging and open a new market for the recycling process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Mechanics of Composites Laboratory, Universidade Federal de Minas Gerais, 6627 Antonio Carlos Avenue, Belo Horizonte, MG 31270-901, Brazil; On sabbatical at Aerospace and Mechanical Engineering Department, University of Arizona, 1130 N Mountain Avenue, Tucson, AZ 85721, USA

On sabbatical at Aerospace and Mechanical Engineering Department, University of Arizona, 1130 N Mountain Avenue, Tucson, AZ 85721, USA

References (23)

Show source-provided references
1. Burgiel, J. , Butcher, W. , Halpern, R. , Oliver, D. , Tangora, P. , Tangora, R.W. and Kirk, D.R. (1994). Cost Evaluation of Automated and Manual Post Consumer Plastic Bottle Sorting Systems, EPA Report EPA/600/R-94/165: 1–10.
2. 10.1016/S0141-3910(99)00182-210.1016/S0141-3910(99)00182-2 ↗
3. Jones, R. · 3066
4. 10.1016/S0141-3910(00)00178-610.1016/S0141-3910(00)00178-6 ↗
5. Selke, S.E. · 2002 · 693
6. Brandrup, J. · 1996
7. Tamma, K.K. · 1999 · 145
8. 10.1081/PPT-10000206610.1081/PPT-100002066 ↗
9. Brazilian Business Commitment for Recycling – CEMPRE · CEMPRE Inform · 2000 · 8 · 1
10. 10.1016/S0266-3538(03)00098-810.1016/S0266-3538(03)00098-8 ↗
11. 10.1016/S0266-3538(03)00094-010.1016/S0266-3538(03)00094-0 ↗
12. 10.1016/S0014-3057(99)00261-X10.1016/S0014-3057(99)00261-X ↗
13. Faria, A.C.A.
14. 10.1177/00219983920260160210.1177/002199839202601602 ↗
15. ASTM · ASTM Standards Yearbook · 1997 · 15 · 46
16. ASTM · ASTM Standards Yearbook · 2000 · 15 · 99
17. 10.1016/S0927-0108(97)80008-210.1016/S0927-0108(97)80008-2 ↗
18. Gosh, A.K. · 1984 · 135
19. 10.1017/CBO978113908707010.1017/CBO9781139087070 ↗
20. 10.1016/B978-0-444-89616-2.50007-010.1016/B978-0-444-89616-2.50007-0 ↗
21. 10.1016/S1359-8368(03)00042-810.1016/S1359-8368(03)00042-8 ↗
22. 10.1016/0956-7143(92)90079-A10.1016/0956-7143(92)90079-A ↗
23. Avila, A.F.