journal article·2019-12

An investigation on the mechanical and thermal performance of a novel functionally graded materials–based thermoplastic composites

Akant Kumar Singh, Siddhartha

Publisher page

Abstract

This work investigates the mechanical, fracture toughness, and thermomechanical peculiarity of a novel functionally graded materials (FGMs)–based glass fiber–filled polyamide 66 (PA66) composites. FGMs-based PA66 are fabricated through a particularly designed mold and a punch. Punch is a rotating element of the mold and rotates at 1800 r/min for two min for the fabrication of FGMs. Gradation of fibers takes place in FGMs toward the periphery of the punch cavity due to the centrifugal force. Neat PA66 and homogeneous composites are also fabricated through the same mold for comparative study. Punch remains stationary during the fabrication of neat PA66 and homogeneous composites. PA66 granules filled with 15 wt% and 30 wt% of glass fibers are used to manufacture FGMs and homogeneous composites. Ignition loss test, hardness measurement, and scanning electron microscope (SEM) analysis are used to verify the gradation of glass fibers within FGMs. Result analysis concluded that FGMs performed better as compared to neat PA66 and homogeneous composites. FGMs-based thermoplastic composites have full scope to fabricate polymer gears used in low load applications. This manufacturing route shows a promising potential for fabrication of FGMs-based thermoplastics which otherwise is difficult to manufacture because of their high solidification rate at room temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, NIT Hamirpur, Himachal Pradesh, India

Funding

Depart of Science and Technology, India

References (48)

Show source-provided references
1. Narisawa I. Fatigue and fracture of fibers and polymer materials. Soc Fiber Sci Technol 1985; 41: 81–88.
2. Strumberger N, Gospocic A, Bartulic C. Plastics in automobile industry. Promet - Traffic & Transportation 2005; 17(3): 149–160.
3. Vollrath K. Polymer versus steel and glass. Autom Develop 2004; 5: 50–52.
4. 10.1016/j.ijfatigue.2007.08.01710.1016/j.ijfatigue.2007.08.017 ↗
5. 10.1002/adv.2003510.1002/adv.20035 ↗
6. 10.1016/j.mechmat.2012.08.00810.1016/j.mechmat.2012.08.008 ↗
7. 10.1016/0266-3538(95)00075-510.1016/0266-3538(95)00075-5 ↗
8. 10.1016/j.compscitech.2016.05.00710.1016/j.compscitech.2016.05.007 ↗
9. 10.1177/073168441039789810.1177/0731684410397898 ↗
10. 10.1080/03602559.2014.93539810.1080/03602559.2014.935398 ↗
11. 10.1080/00914037.2011.61005310.1080/00914037.2011.610053 ↗
12. 10.1080/03602559.2014.90948310.1080/03602559.2014.909483 ↗
13. 10.1002/app.3161110.1002/app.31611 ↗
14. 10.1016/j.compositesb.2014.01.01910.1016/j.compositesb.2014.01.019 ↗
15. 10.1016/j.ijfatigue.2009.02.00910.1016/j.ijfatigue.2009.02.009 ↗
16. 10.1016/j.compositesb.2015.02.01110.1016/j.compositesb.2015.02.011 ↗
17. 10.1002/(SICI)1097-4628(19990624)72:13<1783::AID-APP14>3.0.CO;2-B10.1002/(SICI)1097-4628(19990624)72:13<1783::AID-APP14>3.0.CO;2-B ↗
18. 10.1016/j.ijfatigue.2012.09.01510.1016/j.ijfatigue.2012.09.015 ↗
19. 10.1016/j.ijsolstr.2007.03.01210.1016/j.ijsolstr.2007.03.012 ↗
20. Huang K, Guo L, Yu H, et al. A domain-independent interaction integral method for evaluating the dynamic stress intensity factors of an interface crack in nonhomogeneous materials. Int J Solids Struct 2007; 100–101: 547–557.
21. 10.1016/j.mechmat.2014.11.00710.1016/j.mechmat.2014.11.007 ↗
22. 10.1016/j.ijsolstr.2018.03.02510.1016/j.ijsolstr.2018.03.025 ↗
23. 10.1016/j.compscitech.2005.02.02110.1016/j.compscitech.2005.02.021 ↗
24. 10.1016/j.triboint.2004.03.00210.1016/j.triboint.2004.03.002 ↗
25. 10.1016/S0043-1648(01)00794-310.1016/S0043-1648(01)00794-3 ↗
26. 10.1016/j.matdes.2014.01.01310.1016/j.matdes.2014.01.013 ↗
27. Siddhartha, Singh AK. Mechanical and dry sliding wear characterization of short glass fiber reinforced polyester-based homogeneous and their functionally graded composite materials. Proc Ins Mech Eng L J Mater Des Appl 2015; 229: 274–298.
28. 10.1016/S1359-8368(96)00016-910.1016/S1359-8368(96)00016-9 ↗
29. 10.1016/S1359-835X(97)00016-X10.1016/S1359-835X(97)00016-X ↗
30. 10.1016/S0142-9418(97)00064-010.1016/S0142-9418(97)00064-0 ↗
31. 10.1016/j.wear.2006.04.01210.1016/j.wear.2006.04.012 ↗
32. 10.1016/j.wear.2007.01.04310.1016/j.wear.2007.01.043 ↗
33. 10.1016/j.matdes.2010.02.04910.1016/j.matdes.2010.02.049 ↗
34. 10.1016/j.matdes.2010.08.01110.1016/j.matdes.2010.08.011 ↗
35. Siddhartha A, Patnaik A, Bhatt AD, et al. A study on modified mechanical and wear characteristics of epoxy-particulate filled homogenous composites and their functionally graded materials. J Tribol 2011; 133: 011601.
36. 10.1016/j.matdes.2011.09.01010.1016/j.matdes.2011.09.010 ↗
37. 10.1002/pc.2398210.1002/pc.23982 ↗
38. 10.1002/adv.2171010.1002/adv.21710 ↗
39. Agarwal BD, Broutman LJ. Analysis and performance of fibre composites. 2nd ed. New York: John Wiley & Sons Inc, 1990.
40. 10.1177/08927057890020040510.1177/089270578900200405 ↗
41. 10.1002/pen.76025020610.1002/pen.760250206 ↗
42. Gangil B, Patnaik A, Kumar A, et al. Investigations on mechanical and sliding wear behaviour of short fibre-reinforced vinylester-based homogenous and their functionally graded composites. Proc Inst Mech Eng L J Mater Des Appl 2012; 226: 300–315.
43. Friedrich K, Fakirov S, Zhang Z. Polymer composites from nano- to macroscale. Berlin: Springer, 2005.
44. 10.1016/j.compositesa.2004.03.00710.1016/j.compositesa.2004.03.007 ↗
45. 10.1016/j.engfracmech.2012.02.00110.1016/j.engfracmech.2012.02.001 ↗
46. 10.1016/j.cemconres.2003.08.02710.1016/j.cemconres.2003.08.027 ↗
47. 10.1016/S1359-835X(02)00020-910.1016/S1359-835X(02)00020-9 ↗
48. 10.1016/j.matdes.2010.11.01910.1016/j.matdes.2010.11.019 ↗