Characterization and sliding wear performance of PMMA reinforced with SiO 2 nanoparticles
Source abstract
Abstract
The characterization and wear sliding performance of the poly(methyl methacrylate) (PMMA) reinforced with hydrophilic and hydrophobic nanoparticles of silicon dioxide (SiO 2 ) was studied. The final polymer matrix was treated in a water bath at a temperature of 100°C for 6 h. Steel balls were used to slide against the surface of PMMA specimens reinforced with SiO 2 nanoparticles. Sliding wear tests were carried out in wet sliding conditions applying a drop of distilled water between the specimen and the ball. The tests were carried out up to 9000 cycles at room temperature. A frequency of 5 Hz, a stroke amplitude of 3 mm, and a maximum contact pressure of 1.087 GPa were selected. Fourier transform infrared spectroscopy spectrum, scanning electron microscopy, and microhardness and roughness of the pure PMMA and PMMA/SiO 2 were obtained. The coefficient of friction and wear rates were calculated, and the main wear mechanisms found were adhesion wear, plastic deformation, ploughing, and pitting. The results showed that the addition of hydrophobic nanoparticles of SiO 2 may be employed to enhance the wear resistance of external automotive parts made of polymeric compound matrix. Finally, the specimens showed a hydrophilic behavior (angular contact < 90°) due to the high polarity of the PMMA matrix and the incorporation of the SiO 2 nanoparticles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Área de Ingeniería Mecánica Automotriz, Universidad Politécnica de Pachuca, Zempoala, México
Tecnológico Nacional de México/I.T. Pachuca, Pachuca de Soto, México
Centro de Investigación y de Estudios Avanzados del I. P. N, Querétaro, México
References (24)
Show source-provided references
1. 10.1016/j.arabjc.2017.05.01110.1016/j.arabjc.2017.05.011 ↗
2. 10.1021/jz402762h10.1021/jz402762h ↗
3. 10.1016/j.apsusc.2018.01.01710.1016/j.apsusc.2018.01.017 ↗
4. Karthick R, Sirisha P, Ravi Sankar M. Mechanical and tribological properties of PMMA-sea shell based biocomposite for dental application. Proc Mat Sci 2014; 6: 1989–2000.
5. 10.5005/jp-journals-10015-115110.5005/jp-journals-10015-1151 ↗
6. 10.1016/j.prosdent.2004.10.00210.1016/j.prosdent.2004.10.002 ↗
7. Mese A. Effect of denture cleaners on the hardness of heat- or auto-cured acrylic or silocane-based soft denture liners. Am J Dent 2007; 20(6): 411–415.
8. 10.1016/S0301-679X(98)00093-010.1016/S0301-679X(98)00093-0 ↗
9. 10.1016/S0043-1648(99)00366-X10.1016/S0043-1648(99)00366-X ↗
10. 10.1002/(SICI)1097-0126(199708)43:4<359::AID-PI772>3.0.CO;2-C10.1002/(SICI)1097-0126(199708)43:4<359::AID-PI772>3.0.CO;2-C ↗
11. 10.1177/089270571245315310.1177/0892705712453153 ↗
12. 10.1016/j.tsf.2005.07.29610.1016/j.tsf.2005.07.296 ↗
13. Ackermann J, Juda M, Hirsch D. Multifaceted PMMA drives innovation in many sectors. Engineering Plastics Trend Report, Kunststoffe International, Munich, Germany, 2014.
14. Wagh PB Ingale SV. Comparison of some physico-chemical properties of hydrophilic and hydrophobic silica aerogels. Ceram Inter 2002; 28: 43–50.10.1016/S0272-8842(01)00056-6 ↗
15. Nasir M Subhan A Prihandoko B et al. Nanostructure and property of electrospun SiO2-cellulose acetate nanofiber composite by electrospinning. Energy Procedia 2017; 107: 227–231.10.1016/j.egypro.2016.12.133 ↗
16. Jiang C Zhang Y Wang Q et al. Superhydrophobic polyurethane and silica nanoparticles coating with high transparency and fluorescence. J Appl Polym Sci 2013; 129(5): 2959–2965.10.1002/app.39024 ↗
17. Lin JY and Wang BX. Room-temperature voltage stressing effects on resistive switching of conductive-bridging RAM cells with Cu-doped SiO2 films. Adv Mat Sci Eng 2014; 2014: 1–6.10.1155/2014/594516 ↗
18. 10.1016/j.polymertesting.2007.11.00510.1016/j.polymertesting.2007.11.005 ↗
19. 10.1002/adma.20029002010.1002/adma.200290020 ↗
20. Rymuszka D, Terpiłowski K, Hołysz L, et al. Changes in surface properties of polymethylmethacrylate (PMMA) treated with air plasma. Ann UMCS Chem 2015; 70(1): 65–78.
21. 10.1016/j.apsusc.2015.05.00710.1016/j.apsusc.2015.05.007 ↗
22. Mohseni M, Ramezanzadeh B, Yari H, et al. The role of nanotechnology in automotive industries. New advances in vehicular technology and automotive engineering. London UK: InTech, 2012.
23. 10.1243/13506501JET14010.1243/13506501JET140 ↗
24. 10.1016/j.petrol.2014.04.01010.1016/j.petrol.2014.04.010 ↗