Ultrasound-assisted melt mixing for the preparation of UHMWPE/OMMT nanocomposites
Source abstract
Abstract
Ultrahigh molecular weight polyethylene (UHMWPE)/organic montmorillonite (OMMT) nanocomposites were prepared via a self-made vane mixer which could supply a synergy of ultrasound and extensional deformation. Structure and working principle of this novel mixer were illustrated in detail. Effects of the OMMT content, mixing time, and ultrasound treat time on composites’ morphology, rheological properties, and thermal properties were reported in terms of transmission electron microscopy (TEM), wide-angle X-ray scattering, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). X-ray diffraction (XRD) and TEM showed that the OMMT lay spacing increased from 2.82 nm to 3.29 nm and OMMT dispersed evenly in the matrix using this novel melt mixing equipment. It certified that the melt mixing procedure synergized by ultrasound and extensional deformation was very effective in the exfoliation of silicate layers and also the filler distribution and dispersion. DSC measurements revealed that the crystallization temperature ( T c ) had no visible change with increasing the OMMT content and the melting temperature ( T m ) and melting enthalpy crystallinity ( X c ) increased with the proper OMMT content. The higher T m and X c showed with the proper ultrasound treatment time, however, the T c had no visible change. TGA showed that the onset temperature at which 20% weight loss of the material increased markedly in the case of UHMWPE/OMMT-1 wt% nanocomposite. The onset temperature slightly decreased with the use of ultrasound. Rheological analyses showed that all the samples exhibited non-Newtonian and shear thinning characteristics. Both the storage modulus and complex viscosity increased with continuous addition of the OMMT layers. It also indicated that the introduction of ultrasound tended to decrease the storage modulus and complex viscosity. Universal tensile test indicated that superior tensile strength occurred in samples containing OMMT layers.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Polymer Processing Engineering of Ministry of Education, South China University of Technology, Guangzhou, People’s Republic of China
Funding
the National Natural Science Foundation of China-Guangdong Joint Fundation Project
References (27)
Show source-provided references
1. 10.1002/pc.2233910.1002/pc.22339 ↗
2. 10.1021/am201752d10.1021/am201752d ↗
3. 10.6000/1927-5129.2016.12.3410.6000/1927-5129.2016.12.34 ↗
4. Ma YH · Polym Eng Sci · 2013 · 54 · 1162
5. 10.1007/s13726-015-0329-010.1007/s13726-015-0329-0 ↗
6. 10.1002/marc.20070043210.1002/marc.200700432 ↗
7. 10.1002/mame.20060026010.1002/mame.200600260 ↗
8. Junges F · Chem Soc · 2009 · 20 · 472
9. 10.1016/j.compositesb.2013.03.01410.1016/j.compositesb.2013.03.014 ↗
10. Zhang Q · J Appl Polym Sci · 2013 · 130 · 393010.1002/app.39676 ↗
11. Park SJ · J Ind Eng Chem · 2005 · 11 · 561
12. 10.1016/S1464-391X(08)70227-710.1016/S1464-391X(08)70227-7 ↗
13. 10.1016/j.cep.2007.09.01410.1016/j.cep.2007.09.014 ↗
14. 10.1016/j.matchemphys.2010.08.05510.1016/j.matchemphys.2010.08.055 ↗
15. 10.1016/j.msec.2003.09.05710.1016/j.msec.2003.09.057 ↗
16. Chun YX · J Appl Polym Sci · 2015 · 132
17. 10.1002/pen.2317610.1002/pen.23176 ↗
18. 10.1016/S0032-3861(01)00561-410.1016/S0032-3861(01)00561-4 ↗
19. Liu Y · J Appl Polym Sci · 2015 · 131 · 205
20. 10.1002/app.2174910.1002/app.21749 ↗
21. 10.1039/c3ra45325a10.1039/c3ra45325a ↗
22. 10.1007/s13369-012-0371-610.1007/s13369-012-0371-6 ↗
23. 10.1177/095400830606176810.1177/0954008306061768 ↗
24. 10.1002/adv.2010510.1002/adv.20105 ↗
25. 10.1080/0022234070125745510.1080/00222340701257455 ↗
26. 10.1002/app.2666910.1002/app.26669 ↗
27. 10.1002/app.2987510.1002/app.29875 ↗