Definition of process parameters for manufacturing of thermoplastic composite sandwiches – Part A
Source abstract
Abstract
Thermoplastic composite sandwich structures offer great potential to meet the demands of lightweight structures for aeronautical applications. In this study, compression moulding of sandwich components, consisting of carbon fibre reinforced polyether ether ketone (CF/PEEK) skins and polyetherimide (PEI) core structures, is studied by modelling the effect of processing conditions on the properties of the sandwich structure, particularly the skin to core bond. In order to predict the skin-to-core tensile bond strength, a theoretical model is deduced, which is based on intimate contact and autohesion, the two mechanisms governing the fusion bonding process. The bond model allows the prediction of the tensile bond strength depending on the skin and core pre-heat temperatures and allows a prognostication about the expected failure mechanisms. According to the model, sandwiches manufactured with skin pre-heat temperatures above 290°C and a core kept at room temperature will feature a sufficient bond strength to fail cohesively within the core. In addition, the model predicts that pre-heating the core improves the bond strength. A verification of the model will be published in a follow-up paper.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department Composite Technologies, Airbus Group Innovations, Munich, Germany
Department of Polymer Engineering, Bayreuth University, Bayreuth, Germany
Funding
German Federal Ministry of Education and Research
References (43)
Show source-provided references
1. Kulandaivel PP (2006) Manufacturing and performance of thermoplastic composite sandwich structures. Dissertation, University of Nottingham, Nottingham, UK.
2. Brown K · 2008 · 220
3. 10.1016/j.compositesb.2008.03.01010.1016/j.compositesb.2008.03.010 ↗
4. 10.1016/S1359-835X(96)00098-X10.1016/S1359-835X(96)00098-X ↗
5. 10.1002/adv.2018610.1002/adv.20186 ↗
6. Mc Garva L (2002) Thermoplastic composite sandwich components: experimental and numerical investigation of manufacturing issues. Dissertation, Royal Institute of Technology, Stockholm, UK.
7. 10.1177/109963620404009410.1177/1099636204040094 ↗
8. Beukers A · Adv Mater Struct Res Appl SAMPE Elev · 1992 · 427
9. Aström BT · Sandwich construction 4: Fourth international conference on sandwich construction · 1998 · 705
10. Vieille B · 2012
11. 10.1351/pac19916311160910.1351/pac199163111609 ↗
12. Grimm RA · Adv Mater Process · 1995 · 147 · 27
13. 10.1002/pen.76029190310.1002/pen.760291903 ↗
14. Beevers A · Engineering · 1991 · 231 · 11
15. 10.1177/089270571560468110.1177/0892705715604681 ↗
16. Grünewald J · 2015 · 15
17. 10.1002/pen.76031070910.1002/pen.760310709 ↗
18. 10.1002/pen.76031240610.1002/pen.760312406 ↗
19. 10.1177/08927057980110040410.1177/089270579801100404 ↗
20. 10.1021/ma010858o10.1021/ma010858o ↗
21. 10.1063/1.32852610.1063/1.328526 ↗
22. Agarval V (1991) The role of molecular mobility in the consolidation and bonding of thermoplastic composite materials, PhD Thesis, University of Delaware, Delaware, USA.
23. 10.1021/ma00241a01310.1021/ma00241a013 ↗
24. 10.1177/00219983920260160210.1177/002199839202601602 ↗
25. Dara PH · 1985
26. 10.1177/00219983870210110310.1177/002199838702101103 ↗
27. 10.1063/1.167578910.1063/1.1675789 ↗
28. Phillips R · 1996
29. 10.1002/pc.1018210.1002/pc.10182 ↗
30. Philips R (1996) Consolidation and solidification behavior of thermoplastic composites. PhD Thesis, EPFL, Lausanne, UK.
31. 10.1002/pc.1002710.1002/pc.10027 ↗
32. Akermo M · 1996 · 1372
33. 10.1016/j.compositesa.2015.12.01910.1016/j.compositesa.2015.12.019 ↗
34. Porcher Industries. Pi preg® for thermoplastic composites [Internet], http://www.porcher-ind.com/en/activity/composites-thermoplastic-composites-pipreg-_2_3_10.html.(accessed 4 July 2016).
35. Verein Deutscher Ingenieur eVe · 2013
36. Grouve W (2012) Weld-strength of laser-assisted tape-places thermoplastic composites. PhD Thesis, University Twente, Twente, Netherlands, UK.
37. GE Engineering Plastics. Ultem(R) PEI resin – Product guide, General Electric, 2003.
38. Metals and Alloys - Densities [Internet], http://www.engineeringtoolbox.com/metal-alloys-densities-d_50.html.(accessed 14 September 2016).
39. Solids-Specific heat [Internet], http://www.engineeringtoolbox.com/specific-heat-solids-d_154.html.(accessed 14 September 2016).
40. Thermal Conductivity of some common Materials and Gases [Internet], http://www.engineeringtoolbox.com/thermal-conductivity-d_429.html.(accessed 14 September 2016).
41. Toho Tenax Europa GmbH. Product Data Sheet Tenax(R)- E TPCL PEEK-HTA 40, 2012.
42. 10.1007/978-1-4471-0171-010.1007/978-1-4471-0171-0 ↗
43. Gaugler&Lutz OHG. Airex® R82 Materialdatenblatt DE 2011 V02 [Internet]. http://www.gaugler-lutz.de/leicht-sandwichbau/airex-kernmaterial/airex-r82.html.(2011, accessed 4 July 2016).