journal article·2018-03

Investigation of physical properties and morphology of compatibilized EPDM/EVA blends

Aman I Khalaf, Azza A Ward, Nehad N Rozik

Publisher page

Abstract

The main aim is to investigate the effect of adding of 5% hydrolyzed poly (ethylene-co-vinyl acetate) (EVAOH), itaconic anhydride (naturally obtained during fermentation of sugars (It.anhydride)), and mercapto-modified ethylene-co-vinyl acetate (EVASH) as compatibilizers on the mechanical properties before and after thermal oxidative aging at 90°C for different time periods up to 7 days, electrical properties, and morphology of ethylene propylene diene monomer/ethylene vinyl acetate (EPDM/EVA) blends of different compositions (75/25, 60/40, 50/50, and 25/75, respectively). Stress at yield, tensile strength, and elongation at break of EPDM/EVA were improved markedly by the addition of 5% compatibilizers (EVAOH, It.anhydride, and EVASH). The micrographs of fractured surfaces obtained from the scanning electron microscope demonstrated further the enhancement of compatibility between EPDM and EVA by the addition of reactive compatibilizers. Further, the blends permittivity ε′ and dielectric loss ε″ have been measured at specific temperatures. The dielectric properties revealed that It.anhydride and EVASH/EPDM/EVA compositions are promising materials for insulation purposes. Finally, aging resistance was improved by the use of compatibilizers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · High voltage insulation and dielectric phenomena · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Polymer and Pigments Department, National Research Centre, Giza, Egypt

Microwave Physics and Dielectric Department, National Research Centre, Giza, Egypt

References (23)

Show source-provided references
1. Walker BM · 1979
2. De SK · 1990
3. 10.1016/j.polymer.2004.04.06310.1016/j.polymer.2004.04.063 ↗
4. Olabisi O · 1979
5. 10.1007/978-94-011-2162-010.1007/978-94-011-2162-0 ↗
6. 10.1007/s10965-009-9302-y10.1007/s10965-009-9302-y ↗
7. 10.1177/09673911050130040210.1177/096739110501300402 ↗
8. 10.1016/0032-3861(95)96846-Z10.1016/0032-3861(95)96846-Z ↗
9. Olabisi O · 1978
10. Finch A · 1986 · 6
11. 10.1016/j.eurpolymj.2009.12.02010.1016/j.eurpolymj.2009.12.020 ↗
12. 10.1016/S0014-3057(01)00040-410.1016/S0014-3057(01)00040-4 ↗
13. 10.1002/1097-4628(20010110)79:2<193::AID-APP10>3.0.CO;2-810.1002/1097-4628(20010110)79:2<193::AID-APP10>3.0.CO;2-8 ↗
14. 10.1016/0014-3057(95)00025-910.1016/0014-3057(95)00025-9 ↗
15. 10.1016/j.matdes.2009.11.05610.1016/j.matdes.2009.11.056 ↗
16. Hirata Y · J Membr Sci · 2005 · 256 · 7
17. 10.1002/app.1993.07047081210.1002/app.1993.070470812 ↗
18. 10.1002/app.1973.07017101910.1002/app.1973.070171019 ↗
19. 10.1016/j.matdes.2009.11.02710.1016/j.matdes.2009.11.027 ↗
20. 10.1002/app.3548310.1002/app.35483 ↗
21. Rozik NN · Proc Inst Mech Eng L · 2015
22. 10.1016/j.matlet.2006.05.06110.1016/j.matlet.2006.05.061 ↗
23. Ward AA · Butad Rubber KGK · 2015 · 10 · 46