Titanium Ply Effects on the Behavior of a Hybrid Thermoplastic Composite Laminate
Source abstract
Abstract
An experimental-cum-analytical study was undertaken to investigate the mechanical response of four hybrid titanium composite laminate (HTCL) systems, each prepared using a graphite-fiber-reinforced thermoplastic polyimide as the adhesive in a unidirectional prepreg. Two of the four HTCL systems were fabricated with the titanium Ti15-3 alloy, while the other two systems were fabricated with the titanium Timetal fl-2 I S alloy. The improvement in mechanical properties achieved by the influence of the titanium layer was assessed by comparing the uniaxial tensile results of static strength at room temperature. An analytical study was also performed to predict the laminate strength and loaddeformation behavior based on the constituent material properties. Results included stressstrain curves, ultimate strength, longitudinal modulus, and the description of the observed modes of failure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering, Clark Atlanta University, James P. Brawley Drive at Fair Street, S. W., Atlanta, GA 30314
Center for High Performance Polymers and Composites, Clark Atlanta University, Atlanta, GA 30314
References (11)
Show source-provided references
1. 10.1115/1.322564110.1115/1.3225641 ↗
2. 2. Schijve, J. 1993. FATIGUE '93, 3-20.
3. 10.1080/0021846950801439210.1080/00218469508014392 ↗
4. 10.1163/156856190X0049610.1163/156856190X00496 ↗
5. Mirdamadi, M. · 1995
6. Hou, T. H.
7. 10.1007/BF0232875110.1007/BF02328751 ↗
8. Vinson, J. R. · 1987
9. Hill, R. · 1950
10. 10. Kelly, A. and G. J. Davies. 1965. Met. Rev., 1-77.10.2307/3419375 ↗
11. 10.1520/STP17723S10.1520/STP17723S ↗