Effect of extrusion and compression moulding on the thermal properties of nylon-6/silica aerogel composites
Source abstract
Abstract
The article presents the effect of a lower extrusion speed and compression moulding processes on the thermal properties of polyamide 6 (PA-6)/aerogel composite. Scanning electron and optical microscope images showed that although most of the aerogel was destroyed during extrusion at 65 r/min, extrusion at 5 r/min showed a better retention of the aerogel structure. However, when subjected to moulding in a compression press, both composites extruded at different speeds suffered significant damage. Nevertheless, the extruded samples did show a lower thermal conductivity compared to the virgin polymer. Further, it was observed that the sample extruded at 5 r/min had a lower damage coefficient value with an overall loss of around 33% to the aerogel structure when compared to the material extruded at 65 r/min, which endured a structural loss of 41% to the aerogel in it.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aerogels and thermal insulation · Advanced Sensor and Energy Harvesting Materials · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centre for Automotive Technology, Cranfield University, Cranfield, UK
Through-life Engineering Services Centre, Cranfield University, Cranfield, UK
Surface Engineering & Nanotechnology Institute, Cranfield University, Cranfield, UK
References (26)
Show source-provided references
1. 10.1038/127741a010.1038/127741a0 ↗
2. 10.1016/j.jmatprotec.2007.06.08410.1016/j.jmatprotec.2007.06.084 ↗
3. 10.1016/S0022-3093(98)00054-410.1016/S0022-3093(98)00054-4 ↗
4. 10.1016/S0022-3093(98)00135-510.1016/S0022-3093(98)00135-5 ↗
5. Koravos J, Norwood C, Pescatore P, Aerogel insulative coatings: new coating technology offers personnel protection. Paint Coat Ind 2013. http://www.pcimag.com/articles/98016-aerogel-insulative-coatings (accessed 12 February 2016).
6. 10.1016/j.jnoncrysol.2009.09.01710.1016/j.jnoncrysol.2009.09.017 ↗
7. 10.1007/s13233-014-2006-010.1007/s13233-014-2006-0 ↗
8. 10.1021/cm048063u10.1021/cm048063u ↗
9. 10.1021/jp804855v10.1021/jp804855v ↗
10. Mielke M, von Dungen KH. Moldings containing silica aerogel particles and their preparation. US 5656195 A, USA, 1997.
11. Vo V, Maurer MI, Bunge F, Thermally insulating polymer foam/aerogel composite articles. WO 2011016962 A2, USA, 2011.
12. 10.1023/A:102356060191110.1023/A:1023560601911 ↗
13. Williams MK, Smith TM, Fesmire JE, Aerogel/polymer composite materials. US 20100279044 A1, USA, 2010.
14. Rauwendaal C · 1986
15. Halliday D, Resnick R, Walker J. Fundamentals of physics. 7th ed. Hoboken, NJ: Wiley, 2005: 203–204.
16. 10.1021/ac60242a01110.1021/ac60242a011 ↗
17. Thermal Wave Imaging Inc. ThermoScope® II: Advanced Thermography for In-Service Inspection. http://www.thermalwave.com/1/376/thermoscope_ii.asp (accessed 16 November 2016).
18. Durethan B30 S 000000 Data Sheet . 2016. https://techcenter.lanxess.com/scp/americas/en/products/datasheet/LANXESS_Durethan_B_30_S_000000_ISO_EN.pdf?docId=187277 (accessed 04 September 2016).
19. Shepard S. Automated binary processing of thermographic sequence data. US 7699521 B2, USA, 2010.
20. Durethan B 30 S 000000 · 2012
21. 10.1016/S0141-3910(96)00046-810.1016/S0141-3910(96)00046-8 ↗
22. 10.6028/jres.087.01210.6028/jres.087.012 ↗
23. 10.1021/i160003a00510.1021/i160003a005 ↗
24. BuyAerogel.com | Enova® Aerogel IC3110 Particles. http://www.buyaerogel.com/product/enova-aerogel-ic3110/ (accessed 08 August 2016).
25. Silica-Silicon Dioxide (SiO2) properties. http://www.azom.com/properties.aspx?ArticleID=1114 (accessed 29 September 2016).
26. 10.1177/073168441557830610.1177/0731684415578306 ↗