journal article·2018-10-30

Evaluation of the impact and flexural strength of PP/clay/CaCO 3 /MAPP ternary nanocomposites by application of full factorial design of experiment

Mohsen Ayaz

Publisher page

Abstract

The purpose of this work is to investigate the impact and flexural strength of ternary nanocomposites based on polypropylene/nano-clay/nano-calcium carbonate (PP/clay/CaCO 3 ) with an compatibilizer, namely, maleic anhydride grafted polypropylene (MAPP) using the design of experiment (DOE) method. A full factorial DOEs was used in order to evaluate the influence of nanoparticles clay (0, 3, and 6 wt%), CaCO 3 (0, 15, and 30 wt%), and MAPP (2 and 4 wt%) on the impact and flexural strength of PP/clay/CaCO 3 /MAPP nanocomposites. Through desirability function, it was observed that desirable values of nanoparticles for the optimal combination of the impact and flexural strength were obtained by 3-wt% nano-clay, 15-wt% nano-CaCO 3 , and 4-wt% MAPP. The effectiveness of the proposed approach was demonstrated through confirmation tests at the optimal levels of parameters.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Malek-Ashtar University of Technology, Tehran, Iran

References (34)

Show source-provided references
1. Lam TD · Mater Sci Eng A · 2009 · 501 · 8710.1016/j.msea.2008.09.060 ↗
2. 10.1016/j.progpolymsci.2013.04.00110.1016/j.progpolymsci.2013.04.001 ↗
3. Fuyou K · Compos Sci Technol · 2012 · 72 · 57410.1016/j.compscitech.2012.01.001 ↗
4. 10.1002/app.2701710.1002/app.27017 ↗
5. 10.1177/002199830935367510.1177/0021998309353675 ↗
6. 10.1177/002199831141368610.1177/0021998311413686 ↗
7. Su F · Compos Part B: Eng · 2011 · 42 · 42110.1016/j.compositesb.2010.12.005 ↗
8. 10.1177/089270571456356110.1177/0892705714563561 ↗
9. 10.1016/j.matdes.2013.02.04110.1016/j.matdes.2013.02.041 ↗
10. 10.1016/j.compscitech.2007.05.02210.1016/j.compscitech.2007.05.022 ↗
11. Lin Y · Polym · 2010 · 51 · 327710.1016/j.polymer.2010.04.047 ↗
12. Nascimento EM · Compos Part B: Eng · 2016 · 91 · 22810.1016/j.compositesb.2015.12.040 ↗
13. 10.1016/j.compscitech.2009.04.01610.1016/j.compscitech.2009.04.016 ↗
14. 10.1039/b902073j10.1039/b902073j ↗
15. Zare Y · J Appl Polym Sci · 2011 · 122 · 318810.1002/app.34378 ↗
16. Ou B · J Compos Mater · 2009 · 43 · 136110.1177/0021998308105335 ↗
17. 10.1016/j.matdes.2013.01.01110.1016/j.matdes.2013.01.011 ↗
18. 10.1016/j.apsusc.2012.05.12410.1016/j.apsusc.2012.05.124 ↗
19. 10.1016/j.polymer.2007.07.01110.1016/j.polymer.2007.07.011 ↗
20. Százdi L · Polym · 2005 · 46 · 800110.1016/j.polymer.2005.06.108 ↗
21. Yang K · Polym Compos · 2006 · 27 · 44310.1002/pc.20211 ↗
22. 10.1016/j.matlet.2005.10.02010.1016/j.matlet.2005.10.020 ↗
23. Wan W · J Appl Polym Sci · 2006 · 102 · 348010.1002/app.24561 ↗
24. 10.1023/A:101604420416810.1023/A:1016044204168 ↗
25. Montgomery DC · 2001
26. Jeong IJ · Comput Oper Res · 2005 · 32 · 317510.1016/j.cor.2004.05.006 ↗
27. Cioni B · Compos Interfaces · 2010 · 17 · 543
28. 10.1016/j.eurpolymj.2004.05.01910.1016/j.eurpolymj.2004.05.019 ↗
29. 10.1016/j.compscitech.2011.01.00210.1016/j.compscitech.2011.01.002 ↗
30. Khosravi H · Polym Test · 2016 · 55 · 13510.1016/j.polymertesting.2016.08.011 ↗
31. 10.1016/j.matdes.2009.10.03110.1016/j.matdes.2009.10.031 ↗
32. 10.1080/00222348.2010.48339210.1080/00222348.2010.483392 ↗
33. 10.1016/j.compscitech.2016.04.01510.1016/j.compscitech.2016.04.015 ↗
34. 10.1016/j.compositesb.2015.08.07510.1016/j.compositesb.2015.08.075 ↗