journal article·2018-12

A nonlinear strain rate and pressure-dependent micro-mechanical composite material model for impact problems

Sandeep Medikonda, Ala Tabiei

Publisher page

Abstract

A micro-mechanical composite material model is developed to simulate the behavior of unidirectional composites under impact loading conditions in the nonlinear finite element solver (LS-DYNA ® ). The nonlinear strain rate and pressure dependency in the composite material model is accounted by the resin, which uses previously developed state variable viscoplastic equations. These equations have been originally developed for metals; however, these are modified to account for the significant contributions of hydrostatic stresses typically observed in polymers. The material model also uses a continuum damage mechanics (CDM) based failure model to incorporate the progressive post-failure behavior. A set of Weibull distribution functions are used to quantify this behavior, and a methodology of assigning physical significance to the choice of damage/softening parameters used in these functions is presented. The impact response of composite laminate plates has been simulated and compared to the experiments. It has been observed that the predicted results compare favorably to the experiments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Materials Engineering, University of Cincinnati, Cincinnati, OH, USA

References (39)

Show source-provided references
1. 10.1016/S0266-3538(97)00146-210.1016/S0266-3538(97)00146-2 ↗
2. 10.1115/1.311950010.1115/1.3119500 ↗
3. 10.1115/1.311106510.1115/1.3111065 ↗
4. 10.1016/S0045-7949(00)00200-510.1016/S0045-7949(00)00200-5 ↗
5. 10.1016/S1359-8368(98)00008-010.1016/S1359-8368(98)00008-0 ↗
6. 10.1016/S0734-743X(00)00038-510.1016/S0734-743X(00)00038-5 ↗
7. 10.1016/S0142-9418(03)00026-610.1016/S0142-9418(03)00026-6 ↗
8. 10.1016/S1359-8368(02)00081-110.1016/S1359-8368(02)00081-1 ↗
9. Gilat A, Goldberg RK, Roberts GD. Experimental study of strain-rate-dependent behavior of carbon/epoxy composite. Compos Sci Technol 2002; 62: 1469–1476.10.1016/S0266-3538(02)00100-8 ↗
10. 10.1016/S0144-8617(00)00338-610.1016/S0144-8617(00)00338-6 ↗
11. 10.1016/0263-8223(95)00116-610.1016/0263-8223(95)00116-6 ↗
12. 10.1016/S0020-7683(00)00223-710.1016/S0020-7683(00)00223-7 ↗
13. Wineman AS · 2000
14. Aklonis JJ, MacKnight WJ. Introduction to Polymer Viscoelasticity, 2nd ed. New York: Wiley, 1983. http://www.worldcat.org/title/introduction-to-polymer-viscoelasticity/oclc/444551329?%20referer=di&ht=edition
15. 10.1002/pen.76035040510.1002/pen.760350405 ↗
16. 10.1016/S0266-3538(00)00133-010.1016/S0266-3538(00)00133-0 ↗
17. Goldberg RK. Strain Rate Dependent Deformation and Strength Modeling of a Polymer Matrix Composite Utilizing a Micromechanics Approach. Degree awarded by Cincinnati Univ, 1999. https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20000018017.pdf
18. 10.1002/pen.76019160210.1002/pen.760191602 ↗
19. Ward IM, Sweeney J. An introduction to the mechanical properties of solid polymers. 2nd Ed. John Wiley & Sons, 2004, p. 382.
20. 10.1016/S0020-7683(96)00191-610.1016/S0020-7683(96)00191-6 ↗
21. 10.1061/(ASCE)0893-1321(2005)18:1(18)10.1061/(ASCE)0893-1321(2005)18:1(18) ↗
22. 10.1061/(ASCE)0893-1321(2008)21:3(140)10.1061/(ASCE)0893-1321(2008)21:3(140) ↗
23. 10.1016/S0266-3538(03)00221-510.1016/S0266-3538(03)00221-5 ↗
24. 10.1016/S0266-3538(97)00183-810.1016/S0266-3538(97)00183-8 ↗
25. 10.1016/S1359-8368(98)00009-210.1016/S1359-8368(98)00009-2 ↗
26. 10.1016/0167-6636(94)00053-010.1016/0167-6636(94)00053-0 ↗
27. Yen CF. Ballistic impact modelling of composite materials. In: Proceedings of the 7th International LS-DYNA Users Conference 2002, pp. 15–26. http://www.dynalook.com/international-conf-2002/Session_6-3.pdf
28. Van Hoof J, Worswick MJ, Straznicky PV, Simulation of the Ballistic Impact Response of Composite Helmets. In: 5th International LS-DYNA Users Conference, Southfield, 1998. Michigan. http://www.formingandimpact.uwaterloo.ca/publications.html
29. 10.1016/j.ijnonlinmec.2004.10.00410.1016/j.ijnonlinmec.2004.10.004 ↗
30. 10.1016/j.compstruct.2008.02.01710.1016/j.compstruct.2008.02.017 ↗
31. Goldberg RK, Roberts GD, Gilat A. Implementation of an Associative Flow Rule Including Hydrostatic Stress Effects Into the High Strain Rate Deformation Analysis of Polymer Matrix Composites, 2003. https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20030065962.pdf
32. 10.1016/0045-7949(94)90047-710.1016/0045-7949(94)90047-7 ↗
33. 10.1106/4D5L-9WPN-6BE0-LT9A10.1106/4D5L-9WPN-6BE0-LT9A ↗
34. Medikonda S · Int J Compos Mater · 2017 · 7 · 51
35. 10.1080/1537649060108462410.1080/15376490601084624 ↗
36. Bazant Z · Mater Struct · 1983 · 16 · 155
37. 10.1016/j.compositesa.2005.06.00810.1016/j.compositesa.2005.06.008 ↗
38. 10.1016/j.compstruct.2013.07.02610.1016/j.compstruct.2013.07.026 ↗
39. Zheng X. Nonlinear Strain Rate Dependent Composite Model for Explicit Finite Element Analysis. Doctoral dissertation, University of Akron, 2006. https://etd.ohiolink.edu/rws_etd/document/get/akron1145626022/inline