journal article·2020-12

Nano-additive reinforcement of mixture epoxy syntactic foams

Kerrick R Dando, David R Salem

Publisher page

Abstract

Carbon nanofibers (CNFs) and halloysite nanotubes (HNTs) were incorporated in syntactic foams containing a 90% by volume homogeneous mixture of (20/80 wt%) glass/thermoplastic microballoons to enhance the mechanical and impact response properties. Tensile, compressive, and impact tests were employed to comparatively characterize the effect of nano-additive reinforcement on mechanical response properties. Compressive strength and modulus enhancements as large as 39% and 18%, respectively, were achieved with a 0.125 wt% addition of CNF and increases of 61% and 7%, respectively, were achieved with a 0.125 wt% addition of HNT. Tensile strength and modulus enhancements as large as 107% and 68%, respectively, were achieved with a 0.125 wt% addition of CNF and increases of 104% and 70%, respectively, were achieved with a 0.125 wt% addition of HNT. Impact analysis data were used to show that measured peak force increased and build-up time to peak force decreased with increasing CNF or HNT weight percentage due to stiffening of the matrix. The smallest increase observed in peak force was 20% for a 0.125 wt% addition of CNF and 17% for a 0.125 wt% addition of HNT.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Clay minerals and soil interactions · Polymer Nanocomposites and Properties · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Composites and Polymer Engineering (CAPE) Laboratory, South Dakota School of Mines & Technology, Rapid City, SD, USA

Nanoscience and Nanoengineering Program, South Dakota School of Mines & Technology, Rapid City, SD, USA

Department of Materials and Metallurgical Engineering, South Dakota School of Mines & Technology, Rapid City, SD, USA

Funding

NASA EPSCoR

References (38)

Show source-provided references
1. 10.1023/A:101798682060310.1023/A:1017986820603 ↗
2. 10.1016/S0263-8223(03)00060-610.1016/S0263-8223(03)00060-6 ↗
3. 10.1016/j.matlet.2006.06.03310.1016/j.matlet.2006.06.033 ↗
4. 10.1002/app.2354810.1002/app.23548 ↗
5. 10.1016/j.compositesb.2012.02.03010.1016/j.compositesb.2012.02.030 ↗
6. 10.1016/j.matlet.2003.08.01210.1016/j.matlet.2003.08.012 ↗
7. 10.1016/S0266-3538(99)00066-410.1016/S0266-3538(99)00066-4 ↗
8. Hodge AJ · NASA/TM 2000-210252 · 2000
9. Watkins L
10. 10.1177/0021955X1770009310.1177/0021955X17700093 ↗
11. 10.1023/A:100476791076210.1023/A:1004767910762 ↗
12. 10.1023/A:101327701184810.1023/A:1013277011848 ↗
13. 10.1016/j.msea.2006.04.07810.1016/j.msea.2006.04.078 ↗
14. 10.1016/j.msea.2007.08.02010.1016/j.msea.2007.08.020 ↗
15. 10.1016/j.matlet.2009.06.02410.1016/j.matlet.2009.06.024 ↗
16. 10.1177/0021955X1036832110.1177/0021955X10368321 ↗
17. 10.1016/S0013-7944(98)00013-710.1016/S0013-7944(98)00013-7 ↗
18. Dando KR · 2018
19. 10.1177/002199831881078210.1177/0021998318810782 ↗
20. 10.1177/002199831771626710.1177/0021998317716267 ↗
21. 10.1088/0957-4484/19/28/28570910.1088/0957-4484/19/28/285709 ↗
22. 10.1177/089270571881735010.1177/0892705718817350 ↗
23. 10.1021/nn800259q10.1021/nn800259q ↗
24. 10.1016/j.polymer.2008.09.02710.1016/j.polymer.2008.09.027 ↗
25. Pasbakhsh P
26. 10.1016/j.eurpolymj.2011.06.00710.1016/j.eurpolymj.2011.06.007 ↗
27. 10.1016/j.polymer.2007.08.03510.1016/j.polymer.2007.08.035 ↗
28. 10.1016/j.compscitech.2011.01.01810.1016/j.compscitech.2011.01.018 ↗
29. 10.1016/j.matdes.2012.06.03610.1016/j.matdes.2012.06.036 ↗
30. 10.1016/j.compositesa.2010.12.00310.1016/j.compositesa.2010.12.003 ↗
31. 10.1016/j.polymertesting.2014.07.01710.1016/j.polymertesting.2014.07.017 ↗
32. 10.1016/j.matdes.2014.12.01010.1016/j.matdes.2014.12.010 ↗
33. 10.1016/j.clay.2012.06.01410.1016/j.clay.2012.06.014 ↗
34. 10.1016/j.progpolymsci.2014.04.00410.1016/j.progpolymsci.2014.04.004 ↗
35. 10.1016/j.clay.2015.05.00110.1016/j.clay.2015.05.001 ↗
36. 10.21236/ADA54200710.21236/ADA542007 ↗
37. ASTM Standard D695-15 · 2015
38. ASTM Standard D1623-09, 2009 · 2015