Tensile properties and fire residue morphology of flame-retarded-polypropylene composites
Source abstract
Abstract
The polypropylene (PP) composites filled with flame retardants (including aluminum hydroxide (Al(OH) 3 ), magnesium hydroxide (Mg(OH) 2 ), and zinc borate (ZB)) were prepared, and the composites were separately loaded with polyolefin elastomer (POE) and nanometer calcium carbonate (nano-CaCO 3 ). The tensile properties and the fire residue morphology of the specimens after burning for these three groups of composites were measured. The results were shown that the tensile fracture strength and the Young’s modulus increased while the tensile yield strength and the tensile elongation at break ( δ b ) decreased with increasing flame-retardant volume fraction. At the same flame-retardant content, the δ b values of the PP/Al(OH) 3 /Mg(OH) 2 /ZB/nano-CaCO 3 /POE composite were the highest in the three groups of composites. The fire residue in the pyrolysis zone of the specimens increased corresponding to the increased flame-retardant volume fraction and with loading the nano-CaCO 3 and POE, especially at low-flame-retardant concentration. The reinforcing and the flame-retarded mechanisms of the composites were discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Flame retardant materials and properties · Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Division of Green Function Materials and Equipment, School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, People’s Republic of China
References (29)
Show source-provided references
1. Wang DK · J Appl Polym Sci · 2016 · 133 · 4322510.1002/app.43225 ↗
2. 10.1109/TNANO.2016.257804510.1109/TNANO.2016.2578045 ↗
3. 10.1002/pi.273310.1002/pi.2733 ↗
4. 10.1080/03602559.2011.63982910.1080/03602559.2011.639829 ↗
5. 10.1016/j.compositesb.2009.04.00510.1016/j.compositesb.2009.04.005 ↗
6. 10.1016/j.compositesb.2013.08.01210.1016/j.compositesb.2013.08.012 ↗
7. 10.1002/app.4012010.1002/app.40120 ↗
8. 10.1016/j.compositesb.2011.06.02010.1016/j.compositesb.2011.06.020 ↗
9. 10.1016/j.compositesb.2014.10.05410.1016/j.compositesb.2014.10.054 ↗
10. 10.1016/j.polymertesting.2017.04.02210.1016/j.polymertesting.2017.04.022 ↗
11. 10.1002/vnl.2019210.1002/vnl.20192 ↗
12. 10.3144/expresspolymlett.2009.3910.3144/expresspolymlett.2009.39 ↗
13. 10.1002/pc.2321010.1002/pc.23210 ↗
14. 10.1016/j.polymertesting.2017.03.01410.1016/j.polymertesting.2017.03.014 ↗
15. 10.1177/089270571769777510.1177/0892705717697775 ↗
16. 10.1007/s10924-016-0770-y10.1007/s10924-016-0770-y ↗
17. 10.1002/pen.76011030510.1002/pen.760110305 ↗
18. 10.1177/089270571988297510.1177/0892705719882975 ↗
19. 10.1177/089270571771307310.1177/0892705717713073 ↗
20. 10.1177/089270571243956110.1177/0892705712439561 ↗
21. 10.1177/089270571349543210.1177/0892705713495432 ↗
22. 10.1177/089270571351328110.1177/0892705713513281 ↗
23. 10.1177/07316840177267899510.1177/073168401772678995 ↗
24. Liang JZ · 2012
25. 10.1002/pc.2110410.1002/pc.21104 ↗
26. 10.1016/j.compositesb.2013.03.01910.1016/j.compositesb.2013.03.019 ↗
27. 10.1002/app.4502410.1002/app.45024 ↗
28. 10.3144/expresspolymlett.2017.4510.3144/expresspolymlett.2017.45 ↗
29. 10.1002/mawe.20170025410.1002/mawe.201700254 ↗