journal article·2022-10

Experimental study and finite element analysis on the joining performance of GF/PP rivets

Yuan Wang, Yong Li, Dajun Huan, Lisha Li, Li Liu, Ye Cheng, Hongquan Liu

Publisher page

Abstract

To improve the performance of thermoplastic composite joints and reduce the weight of joints, glass fiber (GF)/polypropylene (PP) thermoplastic composite rivets (GF/PP rivets) were prepared and tensile test and simulation analysis of GF/PP-riveted single-lap joints were carried out. Based on the tensile test, the optimum extension length of GF/PP rod with different diameters was determined by taking the specific joint strength (the ratio of joint strength to the weight of fasteners) as the evaluation index. The effects of the rivet diameter and the thickness of composite laminates on the specific joint strength and the weight reduction of GF/PP-riveted single-lap joints were studied. The joining mechanism and the failure behavior of GF/PP-riveted joints were analyzed by finite element simulation. The experimental results indicate that the specific joint strength of GF/PP-riveted joints decreased with increasing rivet diameter and laminate thickness. For the same specific joint strength, the weight of fasteners at joints could be reduced by 81.4% and 73.9%, respectively, by using GF/PP rivets instead of steel bolts and aluminum blind rivets. The simulation results show that the change of inclination angle of rivet body would cause the change of failure mode of joints.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, People’s Republic of China

National Key Laboratory of Science and Technology on Helicopter Transmission, Nanjing, People’s Republic of China

References (30)

Show source-provided references
1. 10.1016/j.compositesa.2015.06.01510.1016/j.compositesa.2015.06.015 ↗
2. 10.1177/089270571038146910.1177/0892705710381469 ↗
3. 10.1080/10426914.2016.115103810.1080/10426914.2016.1151038 ↗
4. 10.1007/s42114-019-00080-010.1007/s42114-019-00080-0 ↗
5. Lu X · J Mater Eng · 2018 · 46 · 146
6. 10.1016/j.compositesa.2014.06.01610.1016/j.compositesa.2014.06.016 ↗
7. Wang YS · Acta Mater Compos Sinic · 2016 · 33 · 1
8. 10.1002/pen.2142410.1002/pen.21424 ↗
9. 10.1016/j.apsusc.2014.06.07210.1016/j.apsusc.2014.06.072 ↗
10. 10.4271/2001-01-291210.4271/2001-01-2912 ↗
11. 10.4271/2004-01-282110.4271/2004-01-2821 ↗
12. 10.1016/j.compstruct.2018.01.04010.1016/j.compstruct.2018.01.040 ↗
13. 10.1016/j.polymertesting.2018.02.00210.1016/j.polymertesting.2018.02.002 ↗
14. 10.1016/S0142-1123(01)00061-510.1016/S0142-1123(01)00061-5 ↗
15. Hu L · J B Univ Aeronaut Astronaut · 2016 · 42 · 287
16. ISO 4762:2004. Hexagon socket head cap screws.
17. ISO 7089:2000. Plain washers—normal series—product grade A.
18. ISO 14588:2000. Blind rivets—terminology and definitions.
19. D 5961/D 5961M-08
20. 10.1115/1.315366410.1115/1.3153664 ↗
21. 10.1177/00219983910250050510.1177/002199839102500505 ↗
22. 10.1177/002199830203600453910.1177/0021998302036004539 ↗
23. 10.1016/j.compscitech.2016.07.01510.1016/j.compscitech.2016.07.015 ↗
24. 10.1016/j.compstruct.2016.10.09310.1016/j.compstruct.2016.10.093 ↗
25. 10.1016/j.compositesa.2015.07.00610.1016/j.compositesa.2015.07.006 ↗
26. 10.1016/0266-3538(96)00005-X10.1016/0266-3538(96)00005-X ↗
27. 10.1142/S175882511750110110.1142/S1758825117501101 ↗
28. 10.1016/j.compstruct.2012.01.01610.1016/j.compstruct.2012.01.016 ↗
29. Krueger R. Development of and application of benchmark examples for mixed mode I/II quasi-static delamination propagation predictions. Report, National Aeronautics and Space Administration, USA, January 2012.
30. 10.1016/j.compositesa.2009.02.02110.1016/j.compositesa.2009.02.021 ↗