Effect of stretching speed on morphologies and properties of in situ microfibrillar POE/PLA composites
Source abstract
Abstract
In situ microfibrillar ethylene–octene copolymer (POE)/poly(lactic acid) (PLA) composites (MFCs) with different phase morphologies were prepared by controlling the stretching speed and maintaining the weight ratio of POE/PLA of 80/20. Four different stretching speeds were employed to study the effect of PLA microfibrillar morphology on tensile, crystalline, and rheological properties of MFCs. Scanning electron microscopic images revealed that the morphology of PLA phase was strongly influenced by stretching speed. MFCs with highest aspect ratio and smaller diameter of PLA microfibrils were obtained with a stretching speed of 60 rpm. The PLA microfibrils with high aspect ratio had the best reinforcement effect on MFCs. The dynamic rheological properties indicated that the MFCs achieved higher storage modulus and loss modulus at the stretching speed of 60 rpm.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Polymer Foaming and Composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Engineering Research Center for Compounding and Modification of Polymer Materials, Guiyang, Guizhou, China
Guizhou Material Industrial Technology Institute, Guiyang, Guizhou, China
Institution of Supervision and Inspection Product Quality of Guizhou Province, Guiyang, China
Funding
Guiyango�Baiyun Districta s Science and Technologyo�Plano�Project
References (33)
Show source-provided references
1. 10.1002/app.4887710.1002/app.48877 ↗
2. 10.1016/S0014-3057(02)00148-910.1016/S0014-3057(02)00148-9 ↗
3. 10.1002/app.2516910.1002/app.25169 ↗
4. 10.1039/C5TA00314H10.1039/C5TA00314H ↗
5. 10.1177/089270571773490810.1177/0892705717734908 ↗
6. 10.1177/089270571349543210.1177/0892705713495432 ↗
7. 10.1002/app.2967610.1002/app.29676 ↗
8. 10.1007/s12221-013-2128-610.1007/s12221-013-2128-6 ↗
9. 10.1002/app.1172510.1002/app.11725 ↗
10. 10.1002/polb.2029310.1002/polb.20293 ↗
11. 10.1007/s10853-008-2468-610.1007/s10853-008-2468-6 ↗
12. 10.1002/pola.2064910.1002/pola.20649 ↗
13. Reddy CS · Macromol Symp. Weinheim: WILEY-VCH Verlag · 2009 · 277 · 11910.1002/masy.200950315 ↗
14. 10.1002/app.2334810.1002/app.23348 ↗
15. 10.1002/pi.193610.1002/pi.1936 ↗
16. 10.1007/s00289-011-0641-610.1007/s00289-011-0641-6 ↗
17. 10.1021/acs.biomac.5b0125310.1021/acs.biomac.5b01253 ↗
18. 10.1021/bm501099310.1021/bm5010993 ↗
19. 10.1007/s10853-012-6862-810.1007/s10853-012-6862-8 ↗
20. 10.1002/pat.152510.1002/pat.1525 ↗
21. Wang J · J Appl Polym Sci · 2014 · 131 · 4010810.1002/app.40108 ↗
22. 10.1007/s10853-011-5346-610.1007/s10853-011-5346-6 ↗
23. 10.1016/j.eurpolymj.2009.12.02710.1016/j.eurpolymj.2009.12.027 ↗
24. 10.1007/s12221-016-6309-y10.1007/s12221-016-6309-y ↗
25. 10.1002/app.4379710.1002/app.43797 ↗
26. 10.1002/pc.2491910.1002/pc.24919 ↗
27. 10.1002/app.4755710.1002/app.47557 ↗
28. 10.1002/pen.2541110.1002/pen.25411 ↗
29. 10.1016/j.polymer.2004.03.09410.1016/j.polymer.2004.03.094 ↗
30. 10.1016/j.polymer.2014.10.05910.1016/j.polymer.2014.10.059 ↗
31. 10.1016/j.eurpolymj.2009.02.02410.1016/j.eurpolymj.2009.02.024 ↗
32. Lee I · Text Sci Eng · 2019 · 56 · 424
33. 10.1016/j.compositesa.2007.11.00810.1016/j.compositesa.2007.11.008 ↗