Hybrid multi-scale modeling of fused deposition modelling printed thermoplastics: An introduction to material degradation parameter
Source abstract
Abstract
With the increasing popularity of fused deposition modelling (FDM), an improved understanding of the interdependence between process-structure-property (P-S-P) of FDM manufactured (FDMed) parts is imperative. This paper proposes models for linking the microstructure and degradation of properties during the FDM process with the mechanical properties. Through careful and elaborate finite element (FE) modeling, it is demonstrated that there is definite material degradation during the FDM process, which cannot be attributed only to extra voids generated during printing. A novel hybrid multiscale model is proposed to estimate the degradation parameter and utilize this information to predict the printed coupons' properties. Additionally, two methods for generating representative volume element (RVE) are demonstrated using scanning electron microscope (SEM) imaging and density data. For the experimental validation, polyamide (PA) and polylactic acid (PLA) filaments and dogbone samples with multiple raster orientations were tested. The use of degradation parameter during modeling leads to very accurate results for both PLA and PA. Also, it presents insights into the limitations of the FDM process and possible improvements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Indian Institute of Technology, Kharagpur, India
References (42)
Show source-provided references
1. 10.1108/RPJ-04-2013-003910.1108/RPJ-04-2013-0039 ↗
2. 10.1016/j.coco.2022.10116310.1016/j.coco.2022.101163 ↗
3. 10.3390/jmmp301000610.3390/jmmp3010006 ↗
4. 10.1016/j.prostr.2020.06.04010.1016/j.prostr.2020.06.040 ↗
5. 10.1515/mt-2022-008510.1515/mt-2022-0085 ↗
6. 10.1515/mt-2022-008510.1515/mt-2022-0085 ↗
7. 10.1016/j.matdes.2017.03.06510.1016/j.matdes.2017.03.065 ↗
8. 10.3390/polym1314238710.3390/polym13142387 ↗
9. 10.1016/j.addma.2021.10249610.1016/j.addma.2021.102496 ↗
10. 10.1016/j.matdes.2020.10879910.1016/j.matdes.2020.108799 ↗
11. Shashikumar S · J Thermoplast Compos Mater · 2023 · 089270572312000
12. 10.1177/089270571984724410.1177/0892705719847244 ↗
13. Jain A · J Thermoplast Compos Mater · 2023 · 089270572311558
14. Şık A · J Thermoplast Compos Mater · 2023 · 089270572312112
15. 10.1016/j.commatsci.2013.06.04110.1016/j.commatsci.2013.06.041 ↗
16. 10.1016/j.jmatprotec.2015.07.01210.1016/j.jmatprotec.2015.07.012 ↗
17. 10.1007/s00170-018-3014-610.1007/s00170-018-3014-6 ↗
18. 10.1177/002199831351915310.1177/0021998313519153 ↗
19. 10.1016/j.jmapro.2023.07.02710.1016/j.jmapro.2023.07.027 ↗
20. 10.1016/j.addma.2021.10185710.1016/j.addma.2021.101857 ↗
21. 10.1201/9781003158813-1310.1201/9781003158813-13 ↗
22. 10.3390/POLYM1205106010.3390/POLYM12051060 ↗
23. 10.1177/0731684423116755110.1177/07316844231167551 ↗
24. ePA-eSUN 3D printer Filament. Available at: https://www.esun3d.com/epa-product/
25. Knoop F · International Solid Freeform Fabrication Symposium · 2015 · 935
26. 10.1016/j.compositesb.2019.10734110.1016/j.compositesb.2019.107341 ↗
27. 10.1520/D0638-14.110.1520/D0638-14.1 ↗
28. 10.1016/j.matdes.2016.05.07810.1016/j.matdes.2016.05.078 ↗
29. 10.1002/app.5016210.1002/app.50162 ↗
30. 10.3390/ma1302042210.3390/ma13020422 ↗
31. 10.1016/j.compstruct.2022.11551710.1016/j.compstruct.2022.115517 ↗
32. 10.1016/j.mtcomm.2021.10267910.1016/j.mtcomm.2021.102679 ↗
33. 10.1108/1355254031048960410.1108/13552540310489604 ↗
34. 10.1016/j.addma.2018.01.00210.1016/j.addma.2018.01.002 ↗
35. 10.1108/RPJ-04-2018-008710.1108/RPJ-04-2018-0087 ↗
36. 10.1007/s10443-021-09940-910.1007/s10443-021-09940-9 ↗
37. 10.1007/s00170-021-07287-w10.1007/s00170-021-07287-w ↗
38. 10.1016/j.jcsr.2009.04.00810.1016/j.jcsr.2009.04.008 ↗
39. 10.1103/PhysRevB.83.10410310.1103/PhysRevB.83.104103 ↗
40. 10.1007/s00366-018-0616-410.1007/s00366-018-0616-4 ↗
41. 10.1108/RPJ-08-2018-019210.1108/RPJ-08-2018-0192 ↗
42. 10.3390/polym1320355510.3390/polym13203555 ↗