journal article·2017-02

Biocomposite of a multilayer film scrap and curauá fibers

Márcia AS Spinacé, Marco-Aurelio De Paoli

Publisher page

Abstract

An important material for making composites is the scrap of multilayer films. Using plant fibers in these composites can further contribute to reduce their environmental impact. We prepared, by extrusion and injection molding, composites of this scrap reinforced with 20 wt% of curauá fibers. These were characterized using scanning electron microscopy (SEM); optical microscopy; tensile, flexural, and notched impact strength tests; differential scanning calorimetry; carbonyl index (CI) by Fourier transform infrared spectroscopy; reflectance ultraviolet–visible spectroscopy; and water absorption measurements. The fiber promoted an increase in the flexural and tensile moduli strengths. SEM showed good fiber/matrix adhesion, dispersion of the fibers in the matrix and their fibrillation. Weathering of the surface of the composite during environmental aging was evidenced by CI, degree of crystallinity, melting temperature, and the formation of cracks caused by chemi-crystallization. Despite the environmental degradation of the exposed composite surface, the mechanical properties and interfacial adhesion did not change significantly.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Advanced Cellulose Research Studies · Nanocomposite Films for Food Packaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center of Natural and Human Sciences, Federal University of ABC, Bangú, Santo André, SP, Brazil

Chemistry Institute, State University of Campinas, Campinas, São Paulo, Brazil

References (30)

Show source-provided references
1. 10.1016/j.matdes.2012.11.02510.1016/j.matdes.2012.11.025 ↗
2. 10.1177/089270571246166310.1177/0892705712461663 ↗
3. 10.1016/j.carbpol.2008.12.00510.1016/j.carbpol.2008.12.005 ↗
4. 10.1002/app.2968310.1002/app.29683 ↗
5. 10.1016/j.compositesa.2007.08.01110.1016/j.compositesa.2007.08.011 ↗
6. 10.1016/j.polymdegradstab.2012.03.03610.1016/j.polymdegradstab.2012.03.036 ↗
7. 10.1177/073168440707251910.1177/0731684407072519 ↗
8. 10.1016/j.compscitech.2010.06.00610.1016/j.compscitech.2010.06.006 ↗
9. 10.1002/app.1163410.1002/app.11634 ↗
10. 10.1007/s10965-010-9561-710.1007/s10965-010-9561-7 ↗
11. 10.1016/j.polymdegradstab.2010.12.00410.1016/j.polymdegradstab.2010.12.004 ↗
12. 10.1002/vnl.2029210.1002/vnl.20292 ↗
13. 10.1016/j.carbpol.2009.03.01110.1016/j.carbpol.2009.03.011 ↗
14. 10.1016/j.carbpol.2010.08.03910.1016/j.carbpol.2010.08.039 ↗
15. 10.1016/j.carbpol.2009.08.01510.1016/j.carbpol.2009.08.015 ↗
16. 10.1016/j.polymertesting.2004.12.00410.1016/j.polymertesting.2004.12.004 ↗
17. 10.1002/app.3699110.1002/app.36991 ↗
18. Siqueira G · Bioresources · 2010 · 5 · 72710.15376/biores.5.2.727-740 ↗
19. 10.1016/j.polymdegradstab.2008.05.02410.1016/j.polymdegradstab.2008.05.024 ↗
20. 10.1002/(SICI)1099-0488(199808)36:11<1805::AID-POLB2>3.0.CO;2-P10.1002/(SICI)1099-0488(199808)36:11<1805::AID-POLB2>3.0.CO;2-P ↗
21. 10.1016/0141-3910(90)90044-810.1016/0141-3910(90)90044-8 ↗
22. 10.1002/pen.2143910.1002/pen.21439 ↗
23. 10.1002/app.2844110.1002/app.28441 ↗
24. 10.1002/polb.1012710.1002/polb.10127 ↗
25. Mano B · Compos Sci Eng · 2010 · 70 · 29
26. 10.1016/S0032-3861(97)00213-910.1016/S0032-3861(97)00213-9 ↗
27. 10.1590/S0104-1428200000040000810.1590/S0104-14282000000400008 ↗
28. 10.1016/j.compositesa.2008.06.00210.1016/j.compositesa.2008.06.002 ↗
29. 10.1016/j.compositesa.2004.04.00410.1016/j.compositesa.2004.04.004 ↗
30. 10.1016/j.compositesa.2007.01.01510.1016/j.compositesa.2007.01.015 ↗