Morphology evolution, mechanical properties, Mullins effect, and its reversibility of polylactide/nitrile butadiene rubber thermoplastic vulcanizates plasticized by dioctyl phthalate
Source abstract
Abstract
Thermoplastic vulcanizates (TPVs) based on polylactide (PLA)/nitrile butadiene rubber (NBR) blends were prepared by dynamic vulcanization where the PLA phase was plasticized by dioctyl phthalate (DOP), and the influence of DOP dosage on mechanical properties, morphology evolution, Mullins effect, and its reversibility were investigated systematically. The experimental results indicated that the mechanical properties of PLA/NBR TPVs were improved significantly with the addition of DOP. Compared with that of the PLA/NBR TPVs, the Shore A hardness was decreased obviously, while the elongation at break was increased slightly with increasing DOP dosage. Mullins effect results showed that the TPVs incorporated with DOP had the relatively lower stress-softening effect. The recovery ability of the maximum stress could be remarkably enhanced by increasing heat treatment temperature. Morphology studies showed that the network microstructure of the co-continuous phases was denser with the increasing dynamic vulcanization time; however, the network microstructure of the co-continuous was changed slightly with the addition of DOP.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Materials Science and Engineering, Qingdao University of Science and Technology, Qingdao, People’s Republic of China
Funding
Upgraded Project of Shandong Province for Guidance Ability of Graduate Tutors · natural science foundation of shandong province
References (32)
Show source-provided references
1. 10.1177/089270571247025910.1177/0892705712470259 ↗
2. 10.1177/089270571350367210.1177/0892705713503672 ↗
3. 10.1016/j.matchemphys.2012.04.01910.1016/j.matchemphys.2012.04.019 ↗
4. Gessler AM, Haslett WH. Process for preparing a vulcanized blend of crystalline polypropylene and chlorinated butyl rubber. Patent 3,037,954, USA, 1962.
5. Fischer WK. Thermoplastic blend of partially cured monoolefin copolymer rubber and polyolefin plastic. Patent 3,758,643, USA, 1973.
6. 10.5254/1.353502310.5254/1.3535023 ↗
7. 10.5254/1.353816510.5254/1.3538165 ↗
8. 10.5254/1.353921010.5254/1.3539210 ↗
9. 10.1016/j.eurpolymj.2008.11.01710.1016/j.eurpolymj.2008.11.017 ↗
10. 10.5254/1.354344410.5254/1.3543444 ↗
11. 10.1016/j.ijplas.2013.12.00410.1016/j.ijplas.2013.12.004 ↗
12. 10.1002/app.1966.07010020510.1002/app.1966.070100205 ↗
13. 10.1016/j.polymer.2005.09.03910.1016/j.polymer.2005.09.039 ↗
14. 10.1002/app.2080210.1002/app.20802 ↗
15. 10.1021/acssuschemeng.5b0098010.1021/acssuschemeng.5b00980 ↗
16. 10.1016/j.progpolymsci.2009.12.00310.1016/j.progpolymsci.2009.12.003 ↗
17. 10.1016/j.polymer.2016.11.04510.1016/j.polymer.2016.11.045 ↗
18. 10.1021/acsomega.8b0135310.1021/acsomega.8b01353 ↗
19. 10.1039/C8RA05161E10.1039/C8RA05161E ↗
20. 10.1021/acssuschemeng.8b0502510.1021/acssuschemeng.8b05025 ↗
21. 10.1021/acs.macromol.8b0226210.1021/acs.macromol.8b02262 ↗
22. 10.1021/acsami.8b1821210.1021/acsami.8b18212 ↗
23. 10.1016/j.compscitech.2018.07.00510.1016/j.compscitech.2018.07.005 ↗
24. 10.1021/acssuschemeng.8b0026710.1021/acssuschemeng.8b00267 ↗
25. 10.1021/acsomega.6b0032510.1021/acsomega.6b00325 ↗
26. 10.1021/am500476610.1021/am5004766 ↗
27. 10.1016/j.materresbull.2004.10.00510.1016/j.materresbull.2004.10.005 ↗
28. 10.1007/s10965-018-1669-110.1007/s10965-018-1669-1 ↗
29. 10.1016/j.polymer.2005.04.09410.1016/j.polymer.2005.04.094 ↗
30. 10.1021/ma011347510.1021/ma0113475 ↗
31. 10.1021/ma010651v10.1021/ma010651v ↗
32. 10.1016/S0022-5096(01)00136-310.1016/S0022-5096(01)00136-3 ↗