journal article·2023-02

Numerical and experimental investigation of the hole saw tool geometry effects on drilling of random chopped fiber composites

Amira Hassouna, Slah Mzali, Farhat Zemzemi, Mohamed BenTkaya, Salah Mezlini

Publisher page

Abstract

Drilling is the most widely used machining process in manufacturing holes in many industrial applications. Optimizing the drilling process is a key to improve the hole quality. Therefore, numerical modeling is an effective method that gives an idea about the cutting process to optimize the drilling parameters. This paper emphasizes the sensitivity of the thrust force, the torque and the machining-induced damage to the hole saw tool geometry using a 3D Finite Element (FE) model developed using ABAQUS/Explicit. A Johnson cook model associated with a ductile damage law is used to predict the failure mechanism of a random chopped glass fiber reinforced polyester. It is found that the thrust force, the torque and the damage around the hole obtained from the FE model are in good agreement with the experimental data. Differences of about 2% for the thrust force, 2.4% for the torque and 3% for the damage around the hole are observed. The results of the numerical model also indicated that the thrust force as well as the drilled workpiece quality are improved by choosing the suitable rake angle. A decrease of about 61% in the thrust force is observed when varying the rake angle from 0° to 20°. However, the latter has an insignificant effect on the thrust force. Furthermore, it can be concluded that this parameter highly influences the material removal process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratoire de Génie Mécanique, École Nationale d’Ingénieurs de Monastir, Université de Monastir, Monastir, Tunisia

Laboratoire de Mécanique de Sousse, École Nationale d’Ingénieurs de Sousse, Université de Sousse, Sousse, Tunisia

References (50)

Show source-provided references
1. 10.1115/1.343921110.1115/1.3439211 ↗
2. 10.1016/j.compstruct.2016.01.00810.1016/j.compstruct.2016.01.008 ↗
3. 10.1007/s00170-018-2895-810.1007/s00170-018-2895-8 ↗
4. 10.1016/j.compstruct.2017.01.01710.1016/j.compstruct.2017.01.017 ↗
5. 10.1016/0890-6955(96)00013-210.1016/0890-6955(96)00013-2 ↗
6. 10.1007/s00170-016-9626-910.1007/s00170-016-9626-9 ↗
7. 10.1016/j.compositesa.2012.11.02010.1016/j.compositesa.2012.11.020 ↗
8. 10.1177/089270571879654110.1177/0892705718796541 ↗
9. 10.1007/s00170-018-03216-610.1007/s00170-018-03216-6 ↗
10. 10.1177/089270570504455610.1177/0892705705044556 ↗
11. Can A · Teh Vjesn · 2017 · 24 · 435
12. Abdul Budan D · J Eng Sci Technol · 2011 · 6 · 733
13. 10.1177/002199830934535410.1177/0021998309345354 ↗
14. 10.1080/1091034050039818310.1080/10910340500398183 ↗
15. 10.1177/073168441562628410.1177/0731684415626284 ↗
16. 10.1016/0890-6955(95)00014-O10.1016/0890-6955(95)00014-O ↗
17. 10.1016/j.matdes.2007.01.02910.1016/j.matdes.2007.01.029 ↗
18. 10.1177/089270571456312110.1177/0892705714563121 ↗
19. 10.1016/j.ijmachtools.2005.10.00410.1016/j.ijmachtools.2005.10.004 ↗
20. 10.1016/j.matdes.2008.03.02210.1016/j.matdes.2008.03.022 ↗
21. 10.1016/j.ijmachtools.2005.03.01510.1016/j.ijmachtools.2005.03.015 ↗
22. 10.1016/S1359-835X(00)00069-510.1016/S1359-835X(00)00069-5 ↗
23. 10.1016/j.compstruct.2014.06.03410.1016/j.compstruct.2014.06.034 ↗
24. 10.1016/j.ijmachtools.2016.08.00610.1016/j.ijmachtools.2016.08.006 ↗
25. 10.1007/s00170-017-1369-810.1007/s00170-017-1369-8 ↗
26. 10.1007/s00170-011-3464-610.1007/s00170-011-3464-6 ↗
27. Al-Maghribi A · 2008
28. 10.1007/s10443-007-9034-210.1007/s10443-007-9034-2 ↗
29. 10.1016/j.wear.2005.12.01410.1016/j.wear.2005.12.014 ↗
30. 10.1016/j.compstruct.2003.09.03710.1016/j.compstruct.2003.09.037 ↗
31. Morozov EV · 1
32. Lee S · 1
33. 10.4028/www.scientific.net/AMM.695.16310.4028/www.scientific.net/AMM.695.163 ↗
34. 10.1016/0013-7944(85)90052-910.1016/0013-7944(85)90052-9 ↗
35. ABAQUS · 2011
36. 10.1002/pc.75004030610.1002/pc.750040306 ↗
37. 10.1016/j.procir.2016.07.03610.1016/j.procir.2016.07.036 ↗
38. 10.1243/030932497151318410.1243/0309324971513184 ↗
39. 10.1016/j.proeng.2015.12.53410.1016/j.proeng.2015.12.534 ↗
40. 10.1016/j.ijmachtools.2014.06.00410.1016/j.ijmachtools.2014.06.004 ↗
41. 10.1016/j.ijmachtools.2004.01.01510.1016/j.ijmachtools.2004.01.015 ↗
42. 10.1016/j.procir.2017.03.29610.1016/j.procir.2017.03.296 ↗
43. 10.1016/j.jmatprotec.2003.12.01910.1016/j.jmatprotec.2003.12.019 ↗
44. 10.1002/pc.1048410.1002/pc.10484 ↗
45. 10.1016/j.compstruct.2015.09.02810.1016/j.compstruct.2015.09.028 ↗
46. 10.1016/j.compscitech.2008.07.00910.1016/j.compscitech.2008.07.009 ↗
47. 10.1016/S0924-0136(00)00650-610.1016/S0924-0136(00)00650-6 ↗
48. 10.1016/j.msea.2007.11.15710.1016/j.msea.2007.11.157 ↗
49. 10.1007/s13369-019-03865-z10.1007/s13369-019-03865-z ↗
50. 10.1016/S1359-835X(98)00029-310.1016/S1359-835X(98)00029-3 ↗