Transforming fly ash into value: Sustainable LLDPE-fly ash composites via rotational molding
Source abstract
Abstract
This study focuses on reducing pollution and promoting sustainability by exploring the use of fly ash (FA), an industrial byproduct, in polymer composites through rotational molding. By incorporating FA into a polymer matrix, the research evaluates the performance of these composites. Results show that the tensile strength increased slightly from 16.54 MPa for pure LLDPE to 17.2 MPa with 5% FA but decreased to 13.5 MPa at 10% FA. The modulus significantly improved, rising from 5.1% to 31.3% with 5% to 20% FA content. Hardness also increased, with a maximum rise of 10.25% at 5% FA and 6.2% at 10% FA. However, elongation at break, bending, and impact strength decreased with higher FA content. The density of the composites increased with up to 10% FA, indicating effective integration of FA particles. These findings demonstrate that FA can be successfully used to develop polymer composites in rotational molding, supporting both environmental sustainability and innovative production practices.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Foaming and Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical & Aerospace Engineering, Institute of Infrastructure, Technology, Research and Management, Ahmadabad, India
Funding
Science and Engineering Research Board
References (49)
Show source-provided references
1. 10.1016/j.matpr.2021.09.10610.1016/j.matpr.2021.09.106 ↗
2. Kumar V Mathur M Sharma P. Fly ash : a billion dollar resource - wasted so far. 2001: 1–10.
3. 10.1016/S0921-3449(00)00084-710.1016/S0921-3449(00)00084-7 ↗
4. 10.3390/min1212150310.3390/min12121503 ↗
5. 10.1080/01490451.2022.212811410.1080/01490451.2022.2128114 ↗
6. Ministry of Power G of I. Power sector at a glance ALL India. https://powermin.gov.in/en/content/power-sector-glance-all-india (Accessed 21 April 2024).
7. Central Electricity Authority. Report on fly ash generation at coal / lignite based thermal power stations and it’s utilization in the country for the 1st half of the year 2022 – 2023. https://cea.nic.in/wp-content/uploads/tcd/2023/05/Half_Yearly_Ash_Report_2022_23-1.pdf.
8. 10.1007/s11270-023-06143-910.1007/s11270-023-06143-9 ↗
9. Aakash D, Manish Kumar J. Fly ash – waste management and overview : a Review. Recent Res Sci Technol 2014; 6(1): 30–35.
10. 10.3390/fractalfract606033510.3390/fractalfract6060335 ↗
11. 10.4177/ccgp-d-11-00015.110.4177/ccgp-d-11-00015.1 ↗
12. 10.1016/j.petrol.2020.10791110.1016/j.petrol.2020.107911 ↗
13. ASTM C618-17a. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. Annu Book ASTM (Am Soc Test Mater) Stand. 2017; 1–5.
14. 10.1007/s10661-022-10473-210.1007/s10661-022-10473-2 ↗
15. Ramme B, Tharaniyil M. Coal combustion products utilization handbook. 3rd ed. Wisconsin, USA: We Energies, 2013.
16. 10.1007/s10965-023-03591-z10.1007/s10965-023-03591-z ↗
17. 10.1177/096739112092606610.1177/0967391120926066 ↗
18. 10.1007/s11665-024-09924-310.1007/s11665-024-09924-3 ↗
19. 10.1007/s13369-024-09487-410.1007/s13369-024-09487-4 ↗
20. 10.1002/app.5623710.1002/app.56237 ↗
21. 10.1016/j.compscitech.2005.06.01410.1016/j.compscitech.2005.06.014 ↗
22. 10.1590/S1516-1439201300500015910.1590/S1516-14392013005000159 ↗
23. 10.1080/15376494.2022.205982210.1080/15376494.2022.2059822 ↗
24. 10.3390/ma1506215410.3390/ma15062154 ↗
25. 10.1515/epoly-2016-010310.1515/epoly-2016-0103 ↗
26. 10.1155/2023/334307110.1155/2023/3343071 ↗
27. 10.1007/s10973-013-3542-010.1007/s10973-013-3542-0 ↗
28. 10.1002/app.3860710.1002/app.38607 ↗
29. 10.1039/c5ra17103b10.1039/c5ra17103b ↗
30. 10.1002/pen.2648210.1002/pen.26482 ↗
31. 10.1002/app.2370910.1002/app.23709 ↗
32. 10.1016/j.promfg.2020.04.30110.1016/j.promfg.2020.04.301 ↗
33. 10.1016/j.compositesb.2021.10887610.1016/j.compositesb.2021.108876 ↗
34. 10.3390/polym1111188110.3390/polym11111881 ↗
35. 10.1016/j.polymertesting.2020.10644210.1016/j.polymertesting.2020.106442 ↗
36. 10.1002/pen.2003510.1002/pen.20035 ↗
37. 10.1016/j.addma.2024.10419910.1016/j.addma.2024.104199 ↗
38. 10.1243/PIME_PROC_1996_210_151_0210.1243/PIME_PROC_1996_210_151_02 ↗
39. 10.3390/polym1202036310.3390/polym12020363 ↗
40. 10.1016/j.compositesa.2020.10582710.1016/j.compositesa.2020.105827 ↗
41. 10.1016/j.conbuildmat.2020.12203210.1016/j.conbuildmat.2020.122032 ↗
42. Puchalski M, Dabrowski P, Olejniczak W, et al. The study of silver nanoparticles by scanning electron microscopy, energy dispersive X-ray analysis and scanning tunnelling microscopy. Materials Science- Poland 2007; 25(2): 473–478.
43. 10.3390/polym1104062410.3390/polym11040624 ↗
44. 10.1007/s10965-018-1525-310.1007/s10965-018-1525-3 ↗
45. 10.1177/09673911090170050210.1177/096739110901700502 ↗
46. 10.1080/09276440.2016.118455610.1080/09276440.2016.1184556 ↗
47. 10.1016/j.conbuildmat.2019.11676610.1016/j.conbuildmat.2019.116766 ↗
48. 10.1002/app.3060510.1002/app.30605 ↗
49. 10.4028/www.scientific.net/AMR.1016.2310.4028/www.scientific.net/AMR.1016.23 ↗