journal article·2026-03Open access

Effects of nanotitania on structure-dielectric properties of polypropylene blends

Nur Azalia Azrin, Noor Azlinda Ahmad, Kwan Yiew Lau, Mona Riza Mohd Esa, Siti Noorhazirah Kamarudin, Nor Hidayah Rahim, Mohd Aizam Talib

Abstract

Polypropylene (PP) satisfies many of the requirements as power cable insulation thanks to its high thermal stability, ability to withstand high voltages, and eco-friendly properties. Due to the high stiffness and brittleness of PP, the extrusion of PP as power cable insulation becomes difficult. Therefore, elastomers have been blended with PP to enhance PP’s flexibility. Nevertheless, one common issue arises when blending elastomer with PP is the degradation of PP/elastomer blends’ dielectric properties. Recently, nanodielectrics have drawn utmost attention as a promising material system for improving the overall performance of polymer-based insulating materials, but such a material system has yet to be pursued for PP blend materials. The current work therefore investigates the effects of titania (TiO 2 ) on the structure and dielectric properties of PP/ethylene-based elastomer (EBE) and PP/propylene-based elastomer (PBE). While adding high amounts of TiO 2 degrades the blend materials’ breakdown strength, the inclusion of small amounts (0.5 wt% and 1 wt%) of TiO 2 improves the breakdown strength of the blend materials by as much as 10%. Notably, the effect of TiO 2 is more apparent on PP/EBE system over PP/PBE system. Mechanisms underlying changes in the breakdown strength of the materials, under both alternating current (AC) and direct current (DC) fields, are analyzed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High voltage insulation and dielectric phenomena · Dielectric materials and actuators · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universiti Teknologi Malaysia

Universiti Teknikal Malaysia Melaka

Advance Diagnostic Services Unit, TNB Labs Sdn. Bhd

Funding

Ministry of Higher Education Malaysia · Universiti Teknologi Malaysia

References (45)

Show source-provided references
1. 10.1016/j.polymer.2020.12267410.1016/j.polymer.2020.122674 ↗
2. 10.1002/pi.506310.1002/pi.5063 ↗
3. Yoshino K, Ueda A, Demura T, et al. Property of syndiotactic polypropylene and its application to insulation of electric power cable -property, manufacturing and characteristics-. Proc IEEE Int Conf Prop Appl Dielectr Mater 2003; 1(c): 175–178.
4. 10.1016/j.compscitech.2018.06.02210.1016/j.compscitech.2018.06.022 ↗
5. 10.1109/ACCESS.2020.300031110.1109/ACCESS.2020.3000311 ↗
6. 10.1049/nde2.1204810.1049/nde2.12048 ↗
7. 10.1177/0892705723116856110.1177/08927057231168561 ↗
8. 10.1002/pen.2482210.1002/pen.24822 ↗
9. Sharip MRM, Lau KY, Piah MAM, et al. Electro-mechanical properties of polypropylene blended with ethylene-based elastomers. IEEE Trans Dielectr Electr Insul 2024; PP: 1.
10. 10.1002/pen.2681510.1002/pen.26815 ↗
11. 10.3390/polym1312201710.3390/polym13122017 ↗
12. 10.1109/TDEI.2017.00620510.1109/TDEI.2017.006205 ↗
13. Adnan M, Abdul-Malek Z, Lau KY, et al. Effect of titanium oxide nanofiller on the electrical properties of polypropylene nanocomposites for HVDC insulation. Proc IEEE Int Conf Prop Appl Dielectr Mater 2021; 2021-July: 222–225.
14. Adnan M, Tahir M, Polypropylene ‐ based nanocomposites for HVDC cable insulation. IET Nanodielectrics 2021; 4(4): 1208.
15. Ketsamee P, Andritsch T, Vaughan A. Effect of surface-modified TiO2 and MgO nanoparticles on dielectric permittivity and breakdown strength of PP nanocomposites. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2021; 1–4.
16. 10.1016/j.compositesb.2012.09.05810.1016/j.compositesb.2012.09.058 ↗
17. 10.3389/fenrg.2022.99943810.3389/fenrg.2022.999438 ↗
18. 10.1109/TNANO.2021.307666310.1109/TNANO.2021.3076663 ↗
19. 10.1177/089270571245428810.1177/0892705712454288 ↗
20. 10.1109/TDEI.2017.00601510.1109/TDEI.2017.006015 ↗
21. 10.1177/0892705724124570910.1177/08927057241245709 ↗
22. 10.1177/089270571984396510.1177/0892705719843965 ↗
23. 10.1177/089270570708363410.1177/0892705707083634 ↗
24. 10.1177/089270570606392710.1177/0892705706063927 ↗
25. 10.1109/TDEI.2019.00860210.1109/TDEI.2019.008602 ↗
26. 10.1002/app.4286310.1002/app.42863 ↗
27. 10.1088/1361-6528/adc58210.1088/1361-6528/adc582 ↗
28. 10.1002/pat.7012110.1002/pat.70121 ↗
29. 10.3390/ma1108132110.3390/ma11081321 ↗
30. 10.1002/app.5606010.1002/app.56060 ↗
31. 10.1109/TDEI.2015.707676210.1109/TDEI.2015.7076762 ↗
32. ASTM Standard D150-98. Designation: d 150-98 standard test methods for AC loss characteristics and permittivity (dielectric constant) of solid electrical insulation 12.1. 2. In: Referenced Documents 2.1 Astm Standards: D 374 Test Methods For Thickness of Solid Electrical Insulation. ASTM International, 1999.
33. D.-09 ASTM Standard. Standard test method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials at commercial power. ASTM International, 2013.
34. 10.1080/0191951900855221910.1080/01919519008552219 ↗
35. Lau KY. Structure and electrical properties of silica-Based polyethylene nanocomposites. University of Southampton, 2013, p. 188. PhD Thesis.
36. 10.1016/j.rinp.2019.10229610.1016/j.rinp.2019.102296 ↗
37. 10.1063/5.006244510.1063/5.0062445 ↗
38. 10.1109/TDEI.2017.00618310.1109/TDEI.2017.006183 ↗
39. 10.1080/1023666X.2024.239422510.1080/1023666X.2024.2394225 ↗
40. 10.1109/TDEI.2020.00920010.1109/TDEI.2020.009200 ↗
41. 10.1109/TDEI.2022.322569310.1109/TDEI.2022.3225693 ↗
42. 10.1109/TDEI.2016.773688210.1109/TDEI.2016.7736882 ↗
43. 10.1109/ACCESS.2018.287482610.1109/ACCESS.2018.2874826 ↗
44. 10.3390/polym1414276210.3390/polym14142762 ↗
45. 10.1109/TDEI.2018.00779610.1109/TDEI.2018.007796 ↗