journal article·2011-07

Improving the Interfacial Adhesion of Highly Filled PP—Bagasse Composites Designed by Taguchi Method

S. Lashgari, H. Garmabi, S. Lashgari, S. Mohammadian-Gezaz

Publisher page

Abstract

In the present article, three different types of coupling agents at various concentrations were used to prepare high-content polypropylene/bagasse composites (65—75 wt%). Maleated polypropylene (PP-g-MA), glycidyl methacrylate-grafted polypropylene (PP-g-GMA), and thermoplastic starch (TPS) were chosen as the coupling agent to generate these wood—plastic composites in a lab-scale counter rotating twin-screw extruder. The changes in the morphological, thermal, and mechanical properties were investigated. Morphological studies showed that the fiber dispersion, wetting, and interfacial tension were improved in the presence of PP-g-MA and PP-g-GMA. Flexural properties, impact resistance, and heat deflection temperature of samples increased with incorporation of PP-g-MA and PP-g-GMA. The Cox’s model used to predict the flexural modulus exhibited a good fitting with the experimental data. With increasing coupling agent content; the thermo-mechanical properties of the composites were improved. The compatibilizing effect of PP-g-MA and PP-g-GMA is more obvious than TPS.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Advanced Cellulose Research Studies · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Polymer Engineering Department, AmirKabir University of Technology, P.O. Box 15875-4413, Tehran, Iran

Polymer Engineering Department, AmirKabir University of Technology, P.O. Box 15875-4413, Tehran, Iran,

Islamic Azad University, Shahre Rey Branch, P.O. Box 18155-144, Tehran, Iran

References (25)

Show source-provided references
1. 10.1016/j.compositesa.2007.01.01410.1016/j.compositesa.2007.01.014 ↗
2. 10.1002/app.1018910.1002/app.10189 ↗
3. 10.1002/app.1991.07042030710.1002/app.1991.070420307 ↗
4. Ichazo, M.N. · Struct. · 2001 · 54 · 207
5. 10.1007/s00107010023210.1007/s001070100232 ↗
6. Atchison, J. · 1987
7. Golmohamadi, A.S.
8. 10.1002/(SICI)1097-4628(19961128)62:9<1491::AID-APP19>3.0.CO;2-110.1002/(SICI)1097-4628(19961128)62:9<1491::AID-APP19>3.0.CO;2-1 ↗
9. 10.1002/(SICI)1097-4628(20000516)76:7<1000::AID-APP3>3.0.CO;2-X10.1002/(SICI)1097-4628(20000516)76:7<1000::AID-APP3>3.0.CO;2-X ↗
10. 10.1002/pen.1169110.1002/pen.11691 ↗
11. 10.1002/app.1173810.1002/app.11738 ↗
12. 10.1080/0091403910803151910.1080/00914039108031519 ↗
13. 10.1080/0091403850807865110.1080/00914038508078651 ↗
14. 10.1016/S0032-3861(97)00065-710.1016/S0032-3861(97)00065-7 ↗
15. Cox, H.L. · J. Appl. Phys. · 1952 · 3 · 72
16. Hull, D. · 1982
17. S. Shibata · Compos. · 2005 · 26 · 689
18. 10.1016/j.polymertesting.2005.07.01210.1016/j.polymertesting.2005.07.012 ↗
19. 10.1002/pc.2020510.1002/pc.20205 ↗
20. 10.1002/app.2260910.1002/app.22609 ↗
21. S. Shibata · S. · 2008 · 39 · 640
22. 10.1016/j.compositesa.2003.09.01210.1016/j.compositesa.2003.09.012 ↗
23. 10.1016/j.polymertesting.2003.09.00210.1016/j.polymertesting.2003.09.002 ↗
24. 10.1007/BF0054351910.1007/BF00543519 ↗
25. Suwanprateeb, J. · J. Polym. Plast. Technol. Eng. · 2000 · 39 · 8310.1081/PPT-100100016 ↗