journal article·2018-01

Effect of the initial fiber alignment on the mechanical properties for GMT composite materials

Yuyang Song, Umesh Gandhi, Adam Koziel, Srikar Vallury, Anthony Yang

Publisher page

Abstract

A glass-mat-reinforced thermoplastic (GMT) material is widely used in the automotive industry for components such as underbody shields, seat structures, front/rear bumper, and front-end modulus. Due to the higher residual length of the glass strands, GMT usually offers better mechanical properties than injection-molded fiber-reinforced thermoplastics. The GMT material is typically manufactured by compression molding (CM) of preimpregnated fibers–reinforced resin sheets called mat. Two types of mats, one with discontinuous random (RD) fibers and other with aligned continuous fibers, are considered in this study. A stack of such mats with different combinations is used to tailor the mechanical properties of the final part. During the CM, the fibers in the mat flow with the resin and change the alignment. In this study, we are presenting an approach to account for the initial condition, such as fiber length, orientation and concentration of the fibers in the mat, and process conditions used, to develop a material model for the finished part. First, a stack of mat with known fiber orientation, length, and concentration as initial conditions is simulated for CM to predict the fiber orientation in the finished part. Next, the material model for the finished parts is developed using a Mori–Tanaka homogenization approach. The fiber orientation in the finished part is mapped from the CM simulation. For the fiber concentration and fiber length distribution, we used an empirical approach. The cross section of the finished part is investigated under optical microscope, and the fiber length and concentration are estimated based on the microstructure and initial stacking of mats. The predicted fiber orientation tensor is verified with orientations measured using computerized tomography (CT) scan on actual parts. The material model is verified by comparing the predicted performance with the actual tensile and bending test results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Material Mechanics · Mechanical Behavior of Composites · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Toyota Research Institute of North America, Ann Arbor, MI, USA

Hanwha Advanced Materials America, Fenton, MI, USA

Moldex3D Northern America Inc, Farmington Hills, MI, USA

References (31)

Show source-provided references
1. 10.1002/pen.76014090810.1002/pen.760140908 ↗
2. Beardmore P · Science · 1980 · 208 · 83310.1126/science.208.4446.833 ↗
3. 10.1002/pen.76015080910.1002/pen.760150809 ↗
4. Biron M · 2012
5. 10.1007/978-94-011-0523-1_510.1007/978-94-011-0523-1_5 ↗
6. 10.1016/j.compstruct.2004.04.00810.1016/j.compstruct.2004.04.008 ↗
7. Advani SG · 2012
8. 10.1177/00219983960300110510.1177/002199839603001105 ↗
9. 10.1016/0001-6160(73)90064-310.1016/0001-6160(73)90064-3 ↗
10. 10.1115/1.289375710.1115/1.2893757 ↗
11. Cantwell WJ · 2013
12. 10.1016/j.compositesa.2011.09.02410.1016/j.compositesa.2011.09.024 ↗
13. 10.1016/0266-3538(93)90051-H10.1016/0266-3538(93)90051-H ↗
14. 10.1201/b1661810.1201/b16618 ↗
15. Wang J · 4
16. 10.2172/108908410.2172/1089084 ↗
17. 2012
18. 2014
19. 10.1002/fld.16610.1002/fld.166 ↗
20. Liu L · 621
21. Muzaferija S
22. 10.1016/j.compositesa.2007.08.02710.1016/j.compositesa.2007.08.027 ↗
23. Tseng H-C
24. 10.1016/j.jnnfm.2008.08.00210.1016/j.jnnfm.2008.08.002 ↗
25. 2015
26. 10.1177/089270571558441110.1177/0892705715584411 ↗
27. 10.1177/073168441140022710.1177/0731684411400227 ↗
28. 10.1016/j.compositesa.2013.04.00210.1016/j.compositesa.2013.04.002 ↗
29. 10.1002/pc.2271010.1002/pc.22710 ↗
30. 2012
31. 2014