journal article·2019-04

Thermal properties and degradability of low density polyethylene microcrystalline cellulose composites

Yousef Ahmad Mubarak, Raghda Talal Abdulsamad

Publisher page

Abstract

The effect of microcrystalline cellulose (MCC) on the thermal properties (melting and crystallization temperatures and percentage crystallinity) and degradation of low density polyethylene (LDPE)–MCC blends were investigated. Weight percentages of MCC were varied at 0, 0.5, 1, 2.5, 5, 10, 20, and 30 wt%. The thermal properties of the composites were studied using differential scanning calorimetry while the degradation test was carried out using soil burial method; the weight loss of LDPE/MCC composites was measured and analyzed over a period of 120 days. It has been found that the addition of MCC to LDPE increased the crystallization temperature from 99°C to 103.5°C and decreased the melting temperature from 117°C to 113.6°C. A rule of a nucleating agent has been given as an interpretation to this increase in the crystallization temperature and intensity of crystals by the increase of MCC content. The dramatic reduction was in the percentage crystallinity where the value reduced from 58% for neat LDPE to about 11% for LDPE/30 wt% MCC. On the other hand, the addition of MCC has a little effect on degradation of LDPE; the weight loss did not exceed 1.5% over a period of 120 days. It seems that even at high MCC concentration, LDPE long carbon chains restrict and increase the resistance to microorganism attack and hence, reduce the hydrolysis and degradability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites · Nanocomposite Films for Food Packaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, School of Engineering, The University of Jordan, Amman, Jordan

References (26)

Show source-provided references
1. Tajeddin B · Am Eurasian J Agric Environ Sci · 2009 · 5 · 777
2. Okelo AP (2012) Mechanical, thermal, diffusion and degradation properties of high density polyethylene and cellulose blends. M.Sc. Thesis, Kenyatta University, Nairobi.
3. 10.4081/jae.2011.2810.4081/jae.2011.28 ↗
4. Abu-Salah S, Abu-Safa A, Abu Drais A. MSW composition analysis—case study: Amman City, Jordan, D-Waste, waste management for everyone, 2011, https://www.d-waste.com/new-infographics/item/152-msw_composition_analysis_.html (2011, accessed 14 March 2018).
5. 10.1016/j.biotechadv.2007.12.00510.1016/j.biotechadv.2007.12.005 ↗
6. 10.1007/s12010-007-9212-610.1007/s12010-007-9212-6 ↗
7. 10.1007/s10924-007-0053-810.1007/s10924-007-0053-8 ↗
8. 10.1007/s10924-005-4758-210.1007/s10924-005-4758-2 ↗
9. Bastioli C · 2005
10. 10.1016/S0960-8524(99)00104-210.1016/S0960-8524(99)00104-2 ↗
11. 10.1016/j.ibiod.2007.03.00910.1016/j.ibiod.2007.03.009 ↗
12. 10.1023/A:101529772724410.1023/A:1015297727244 ↗
13. 10.1016/S0141-3910(97)00162-610.1016/S0141-3910(97)00162-6 ↗
14. 10.1016/S0169-409X(97)00048-310.1016/S0169-409X(97)00048-3 ↗
15. Vasile C · 2005
16. Waswa MN · Int J Sci Technol · 2014 · 3 · 320
17. Moore G · 1996
18. 10.1016/S0040-6031(01)00829-210.1016/S0040-6031(01)00829-2 ↗
19. Brown ME · 2001
20. 10.1016/S0079-6700(97)00039-710.1016/S0079-6700(97)00039-7 ↗
21. 10.1016/j.compositesb.2012.01.06410.1016/j.compositesb.2012.01.064 ↗
22. 10.1016/j.compscitech.2007.05.00910.1016/j.compscitech.2007.05.009 ↗
23. 10.3176/proc.2012.3.1410.3176/proc.2012.3.14 ↗
24. 10.1016/j.compscitech.2012.12.01310.1016/j.compscitech.2012.12.013 ↗
25. Otieno GW (2013) Mechanical, diffusion and degradation properties of blends of cellulose and recycled low density polyethylene. M.Sc. Thesis, Kenyatta University, Nairobi.
26. Panaitescu DM · J Optoelectron Adv Mater · 2007 · 9 · 2524