Thermoplastic elastomer based on LLDPE and EMA
Source abstract
Abstract
The effect of organoclay as well as controlled dicumyl peroxide (DCP) curing on the morphology and physicomechanical properties of linear low-density polyethylene (LLDPE)/ethylene-co-methylacrylate (EMA) blends was explored in this article. The nancomposites were melt-compounded in an internal mixer, HAAKE RHEOMIX, at 140°C and a rotor speed of 60 r min −1 . The nanocomposites were then cured in a compression mold at 170°C for 12 min, and their morphology and physicomechanical properties were evaluated. Exfoliated morphology was observed for DCP-treated nanocomposites. DCP initiated grafting between polymer and clay platelets resulted in high degree of reinforcement in all nanoclay-filled samples through exfoliation of clay platelets as well as interfacial cross-linking and controlled cross-linking in the two polymer phases. Reprocessability studies showed that LLDPE/EMA/Cloisite ® 20A nanocomposites cured with DCP up to 0.5 wt% can easily be reprocessed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Rubber Technology Center, Indian Institute of Technology, Kharagpur, India
Department of Chemical Engineering, Chungbuk National University, Cheongju, Chungbuk, Korea
References (33)
Show source-provided references
1. Utracki LA · 1990
2. Sperling LH · 1997
3. Han CD · 1981
4. Borah JS · Appl Clay Sci · 2012 · 59
5. 10.1007/s10965-007-9115-910.1007/s10965-007-9115-9 ↗
6. 10.1007/s10965-010-9488-z10.1007/s10965-010-9488-z ↗
7. 10.1007/BF0149289710.1007/BF01492897 ↗
8. 10.1007/s10965-010-9450-010.1007/s10965-010-9450-0 ↗
9. 10.1007/s10965-004-8045-z10.1007/s10965-004-8045-z ↗
10. 10.1007/s10973-009-0285-z10.1007/s10973-009-0285-z ↗
11. 10.1007/s10973-008-9237-210.1007/s10973-008-9237-2 ↗
12. 10.1177/089270571561040910.1177/0892705715610409 ↗
13. 10.1002/pc.2388110.1002/pc.23881 ↗
14. 10.1016/j.msea.2010.12.06710.1016/j.msea.2010.12.067 ↗
15. 10.1177/073168441351222910.1177/0731684413512229 ↗
16. 10.1016/j.msea.2009.10.06310.1016/j.msea.2009.10.063 ↗
17. 10.1007/s10973-008-9355-x10.1007/s10973-008-9355-x ↗
18. 10.1007/s00289-012-0711-410.1007/s00289-012-0711-4 ↗
19. 10.1177/089270571247501310.1177/0892705712475013 ↗
20. 10.1016/j.msea.2005.04.01910.1016/j.msea.2005.04.019 ↗
21. 10.1007/s10965-009-9302-y10.1007/s10965-009-9302-y ↗
22. 10.1007/s10965-009-9327-210.1007/s10965-009-9327-2 ↗
23. 10.1002/(SICI)1097-4628(19980131)67:5<789::AID-APP3>3.0.CO;2-P10.1002/(SICI)1097-4628(19980131)67:5<789::AID-APP3>3.0.CO;2-P ↗
24. 10.1002/app.2526810.1002/app.25268 ↗
25. 10.1002/app.2039010.1002/app.20390 ↗
26. 10.1016/0032-3861(95)93104-T10.1016/0032-3861(95)93104-T ↗
27. 10.1016/j.eurpolymj.2004.10.01610.1016/j.eurpolymj.2004.10.016 ↗
28. 10.1002/app.3447210.1002/app.34472 ↗
29. 10.1177/073168440708416110.1177/0731684407084161 ↗
30. 10.1007/s00289-009-0194-010.1007/s00289-009-0194-0 ↗
31. 10.3144/expresspolymlett.2008.3110.3144/expresspolymlett.2008.31 ↗
32. 10.1007/978-94-009-3139-810.1007/978-94-009-3139-8 ↗
33. 10.1007/s10965-017-1262-z10.1007/s10965-017-1262-z ↗