Elastic–Plastic Stress Analysis of Unidirectionally Reinforced Symmetric Thermoplastic Laminated Beams Loaded by Bending Moment
Source abstract
Abstract
Elastic–plastic stress analysis is carried out on steel fiber reinforced thermoplastic matrix laminated beams loaded by bending moment. The beam is composed of four orthotropic layers, perfectly bonded and symmetrically arranged with respect to the x-axis. The orientation angles are chosen as (90°/0°) s , (30°/30°) s , (45°/45°) s and (60°/60°) s . The composite material is assumed to be linearly hardening. x residual stress component is found to be highest at the upper and lower surfaces. However, when the applied bending moment is increased, the plastic region is further expanded towards middle plane from the upper and lower surfaces of the beam and so x residual stress component is found to be highest at the elastic and plastic boundaries. The plastic flow is obtained to be maximum at the upper and lower surfaces for (30°/30°) s orientation. The transverse displacement is obtained to be highest at the free end for (90°/0°) s orientation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Structural Load-Bearing Analysis · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Dokuz Eylül University 35100, Bornova, Izmir, Turkey
Department of Mechanical Engineering, Uludağ University Görükle, Bursa, Turkey
References (26)
Show source-provided references
1. 1. Marissen, R., Brouver, H.R. and Linsen, J. (1995). Notched Strength of Thermoplastic Woven Fabric Composites , Journal of Composite Materials, 63(3): 551–558 .
2. 10.1177/00219983960300110510.1177/002199839603001105 ↗
3. 10.1177/00219983960300140610.1177/002199839603001406 ↗
4. 10.1002/(SICI)1097-4628(19961219)62:12<2161::AID-APP19>3.0.CO;2-810.1002/(SICI)1097-4628(19961219)62:12<2161::AID-APP19>3.0.CO;2-8 ↗
5. 10.1177/00219983940280090510.1177/002199839402800905 ↗
6. 10.1016/0045-7949(94)00354-610.1016/0045-7949(94)00354-6 ↗
7. 10.1007/s00419005016810.1007/s004190050168 ↗
8. 8. Liu, Z., Trogdon, S.A. and Yong, J. (1999). Modeling and Analysis of a Laminated Beam . Mathematical and Computer Modelling, 30: 149–167 .10.1016/S0895-7177(99)00122-3 ↗
9. 10.1016/S0263-8223(97)80012-810.1016/S0263-8223(97)80012-8 ↗
10. 10.1016/S0266-3538(99)00081-010.1016/S0266-3538(99)00081-0 ↗
11. 10.1177/00219983880220050210.1177/002199838802200502 ↗
12. 10.1177/00219983940280010210.1177/002199839402800102 ↗
13. 10.1016/0142-9418(94)90004-310.1016/0142-9418(94)90004-3 ↗
14. 10.1016/0045-7949(94)00603-Z10.1016/0045-7949(94)00603-Z ↗
15. 10.1016/S0020-7403(99)00102-210.1016/S0020-7403(99)00102-2 ↗
16. 10.1016/S0020-7462(99)00029-310.1016/S0020-7462(99)00029-3 ↗
17. 17. Chattopadhyay, A. and Guo, R. (1995). Structural Design Sensitivity Analysis for Composites undergoing Elastoplastic Deformation , Mathematical and Computational Modelling, 22(2): 83–105 .10.1016/0895-7177(95)00113-G ↗
18. 10.1106/QH2B-VEGX-911H-CVUW10.1106/QH2B-VEGX-911H-CVUW ↗
19. 19. Karakuzu, R. and Ozcan, R. (1997). Exact Solution of Elasto-Plastic Stresses in a Metal-Matrix Composite Beam of Arbitrary Orientation Subjected to Transverse Loads , Composite Science and Technology, 56: 1383–1389 .10.1016/S0266-3538(96)00093-0 ↗
20. 10.1016/S0266-3538(00)00146-910.1016/S0266-3538(00)00146-9 ↗
21. 10.1016/S0263-8223(00)00103-310.1016/S0263-8223(00)00103-3 ↗
22. 10.1106/07316840202424810.1106/073168402024248 ↗
23. 23. Gibson, R.F. (1994). Analysis of Laminates, Principles of Composite Material Mechanics, p. 192-192, McGraw-Hill, Singapore .
24. 24. Jones, R.M. (1999). Macromechanical Behavior of a Lamina, Mechanics of Composite Materials, p. 64-64, 2nd edn, Taylor & Francis, Philadelphia .
25. 25. Owen, D.R.J. and Hinton, E. (1980). Elasto-Plastic Problems in Two Dimensions, Finite Elements in Plasticity, p. 223-223, Pineridge Press, Swansea .
26. 26. Chakrabarty, J. (1987). Foundations of Plasticity, Theory of Plasticity, p. 90-90, McGraw-Hill, Singapore .