Research on the service performance of buckled joints in glass fiber-reinforced thermoplastic composite pipes
Source abstract
Abstract
Joints are important connections for realizing long-distance transportation via composite pipes and have been widely used in oil and gas transportation. A joint is also a weak link influencing the safe operation of pipelines. In this work, a three-dimensional assembly model of glass fiber-reinforced plastic composite pipes and metal buckling joints was constructed and analyzed using the finite element method (FEM) to investigate the influence of the buckling amount and structural parameters of joints on the sealing performance of joints. The results showed that the sealing performance of the joint gradually improved with increasing buckling. When a larger amount of buckling occurs, the RTP will undergo excessive plastic deformation, and the sealing performance of the joint decreases. The optimized structural parameters of the metal joint are a buckling amount of 5 mm, several serrations of 13, a tooth height of 3 mm, and two serration angles of 55° and 25°. When using optimized parameters and extreme working conditions (the internal pressure is 19.2 MPa), the maximum stress of the innermost fiber exceeds the tensile strength with a higher risk of failure. However, the optimized design of the joint can meet the requirement of safe operation at a standard pressure of 6.4 MPa.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Xi’an Technological University
University of Arts and Sciences
University of Malaya
National University of Singapore
Funding
General Project · the Xi ’an Science and Technology Plan · Youth Science Fund project · the Xi ’an Beilin District 2022 Science and Technology Plan · National Natural Science Foundation of China · Technology Bureau, universities and institutes of science and technology personnel service enterprise · Key project of Shaanxi provincial department of education
References (36)
Show source-provided references
1. Oswald KJ. Thirty years of fiberglass pipe in oilfield applications: a historical perspective. Mater Perform. 1996; 35(5): 1–5.
2. 10.1177/073168441771366610.1177/0731684417713666 ↗
3. 10.1007/s11053-019-09549-710.1007/s11053-019-09549-7 ↗
4. 10.1016/j.jngse.2018.08.02510.1016/j.jngse.2018.08.025 ↗
5. 10.1179/1743289811Y.000000000610.1179/1743289811Y.0000000006 ↗
6. Pilato LA, Michno MJ. Advanced composite materials. Springer Science & Business Media, 2013.
7. Conley J Weller B Sakr A. Recent innovations in reinforced thermoplastic pipe. In: Proceedings of the northern area western conference 2010 pp. 1–13.
8. Bai Y, Yuan S, Tang J, et al. Behaviour of reinforced thermoplastic pipe under combined bending and external pressure. Ships Offshore Struct. 2015; 10(5): 575–586.
9. Hong Z. Welding technology and evaluation method of polyethylene pipes. China Plastics 2011; 25(07): 48.
10. 10.1177/08927057980110020610.1177/089270579801100206 ↗
11. Zheng J Hou D Shi J et al. A new method for measuring the bond strength of electrofusion joint. In: Pressure Vessels and Piping Conference. American Society of Mechanical Engineers 2013 vol 55713 p. V06BT06A043.10.1115/PVP2013-97174 ↗
12. 10.1177/0892705722109666210.1177/08927057221096662 ↗
13. Huang N, et al. “Control of Welding Speed and Current in Machine-Human Cooperative Welding Processes.” Crystals 12.2 (2022): 235.
14. Fernando U S Nott P Graham G et al. Experimental evaluation of the metal-to-metal seal design for high-pressure flexible pipes. In: Offshore Technology Conference. OTC 2012. OTC-23110-MS.10.4043/23110-MS ↗
15. 10.1177/089270572098204510.1177/0892705720982045 ↗
16. 10.1016/S0263-8223(00)00137-910.1016/S0263-8223(00)00137-9 ↗
17. 10.1016/S0263-8223(01)00061-710.1016/S0263-8223(01)00061-7 ↗
18. 10.1080/17445302.2013.83514710.1080/17445302.2013.835147 ↗
19. 10.1115/1.400676410.1115/1.4006764 ↗
20. 10.1016/j.compositesa.2006.10.01110.1016/j.compositesa.2006.10.011 ↗
21. Zheng J Lu Y Xiang L et al. Experimental investigation on mechanical properties of plastic pipes reforced by cross helically steel wires. 2008.10.1115/1.2892028 ↗
22. Zheng J Li X Xu P et al. Analyses on the short-term mechanical properties of plastic pipe reinforced by cross helically wound steel wires. 2009.10.1115/1.3066826 ↗
23. 10.1016/j.ijpvp.2016.04.00110.1016/j.ijpvp.2016.04.001 ↗
24. 10.1016/j.engfracmech.2013.12.01310.1016/j.engfracmech.2013.12.013 ↗
25. 10.1016/j.compstruct.2014.09.01510.1016/j.compstruct.2014.09.015 ↗
26. 10.1016/j.compstruct.2015.05.03310.1016/j.compstruct.2015.05.033 ↗
27. 10.1177/0731684421105120710.1177/07316844211051207 ↗
28. 10.1016/j.infrared.2019.03.00210.1016/j.infrared.2019.03.002 ↗
29. 10.1002/app.3501310.1002/app.35013 ↗
30. Xinyu N, Anqi H, Dengzun Y, et al. Study on failure mode and burst pressure of electrofusion joints of polyethylene and its composite pipes. China Plastics/Zhongguo Suliao. 2019; 33(6): 63.
31. 10.1080/17445302.2021.190706510.1080/17445302.2021.1907065 ↗
32. 10.1163/016942410X50807310.1163/016942410X508073 ↗
33. 10.1016/j.ijpvp.2018.10.01410.1016/j.ijpvp.2018.10.014 ↗
34. 10.1007/s40430-014-0136-010.1007/s40430-014-0136-0 ↗
35. 10.1177/105678951665024810.1177/1056789516650248 ↗
36. Chapman B Tuohy J Bulmer G et al. Pipe and coupling design methodology for reinforced thermoplastic pipe (RTP) products. In: Proceedings of the 3rd composite materials for offshore operations. Houston 2010 pp. 231–246.