journal article·2013-09

Comparison of effect of surface-modified micro-/nano-mineral fillers filling in the polypropylene matrix

Haydar U Zaman, Park Deuk Hun, Ruhul A Khan, Keun-Byoung Yoon

Publisher page

Abstract

Effect of unmodified and surface-modified micro-/nano-calcium carbonate particles on the mechanical properties, crystallization behavior, and thermal properties of polypropylene (PP)/microscale calcium carbonate (micro-CaCO 3 (mCC)) and PP/nanoscale calcium carbonate (nano-CaCO 3 (nCC)) composites has been comparatively investigated via melt mixing. Mechanical tests indicated that PP/nCC composite with the addition of 5–10 wt% nCC is higher than that of virgin PP and even higher than that of PP/mCC composite with the addition of 5–15 wt% mCC. In addition, incorporation of titanate-coupling agent (isopropyl tri-(dioctylpyrophosphato) titanate (JN114)) further increased the mechanical properties of the composites. This improvement in the mechanical properties was evidenced by scanning electron microscopy. The addition of small amounts of JN114 into PP/mCC and PP/nCC induces the great change in crystallization behavior of PP matrix. Improved distribution of CaCO 3 , enhanced crystallization temperature, largely increased the degree of crystallinity, X c (%), and the heat deformation temperature are achieved for PP/modified-nCC samples.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Polymer Science and Engineering, Kyungpook National University, Daegu, South Korea

Radiation and Polymer Chemistry Laboratory, Institute of Nuclear Science and Technology, Bangladesh Atomic Energy Commission, Dhaka, Bangladesh

References (30)

Show source-provided references
1. 10.1016/j.compscitech.2007.05.02210.1016/j.compscitech.2007.05.022 ↗
2. 10.1016/j.matchemphys.2005.11.02910.1016/j.matchemphys.2005.11.029 ↗
3. 10.1080/0360255090282470510.1080/03602550902824705 ↗
4. 10.1023/A:101604420416810.1023/A:1016044204168 ↗
5. 10.1002/pen.2010910.1002/pen.20109 ↗
6. 10.1016/j.compscitech.2006.07.01010.1016/j.compscitech.2006.07.010 ↗
7. 10.1016/j.polymer.2005.05.12710.1016/j.polymer.2005.05.127 ↗
8. 10.1016/S0141-3910(01)00046-510.1016/S0141-3910(01)00046-5 ↗
9. 10.1021/cm981058410.1021/cm9810584 ↗
10. 10.1002/polb.2074310.1002/polb.20743 ↗
11. 10.1002/app.1075610.1002/app.10756 ↗
12. 10.1016/S0032-3861(03)00546-910.1016/S0032-3861(03)00546-9 ↗
13. 10.1023/A:101863630985510.1023/A:1018636309855 ↗
14. 10.1016/S0032-3861(02)00120-910.1016/S0032-3861(02)00120-9 ↗
15. 10.1016/S0014-3057(99)00055-510.1016/S0014-3057(99)00055-5 ↗
16. 10.1002/(SICI)1097-4628(19970103)63:1<137::AID-APP15>3.0.CO;2-210.1002/(SICI)1097-4628(19970103)63:1<137::AID-APP15>3.0.CO;2-2 ↗
17. 10.1007/BF0062499710.1007/BF00624997 ↗
18. 10.1016/j.mser.2006.06.00110.1016/j.mser.2006.06.001 ↗
19. 10.1016/S0032-3861(97)00370-410.1016/S0032-3861(97)00370-4 ↗
20. 10.1016/j.compscitech.2007.05.02210.1016/j.compscitech.2007.05.022 ↗
21. 10.1002/pc.2021110.1002/pc.20211 ↗
22. 10.1016/S0032-3861(02)00193-310.1016/S0032-3861(02)00193-3 ↗
23. 10.1590/S1516-1439200900040002310.1590/S1516-14392009000400023 ↗
24. 10.1002/app.3024110.1002/app.30241 ↗
25. 10.1002/app.3303710.1002/app.33037 ↗
26. 10.1016/S0032-3861(02)00120-910.1016/S0032-3861(02)00120-9 ↗
27. 10.1002/polb.1054610.1002/polb.10546 ↗
28. 10.1016/0032-3861(85)90015-110.1016/0032-3861(85)90015-1 ↗
29. 10.3139/217.95017210.3139/217.950172 ↗
30. Fujiyama M · Int Polym Process · 1995 · 3 · 25