Surface modifications of wood materials using atmospheric pressure corona-based weakly ionized plasma
Source abstract
Abstract
Enhanced atmospheric pressure corona-based weakly ionized plasma was investigated to modify surface properties of wood materials. The plasma was generated using a point-to-point bare electrode geometry without dielectric barriers. The gas-phase admixture used in this work was argon and acetylene. Wood fibers were processed in the post-discharge region outside of the harsh corona environment. Return corona emanating into the high-voltage gap from the grounded screen was utilized to effectively activate acetylene molecules near the substrate. Scanning electron microscopy was used to study the surface morphology of the treated and untreated substrates. The treated wood material was observed to contain on their surface nano- and micro-nodules of plasma-polymerized acetylene. Capillary rise measurements confirmed changes in the surface wettability of the substrates. The water capillary rise rate and diffusion coefficient were reduced by about 37% and 57%, respectively, for a 15-min treatment of ponderosa pine wood flour.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Surface Modification and Superhydrophobicity · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Electrical Engineering and Computer Science, Washington State University, Pullman, WA, USA
Composite Materials and Engineering Center, Washington State University, Pullman, WA, USA
Funding
Washington State University
References (36)
Show source-provided references
1. 10.1201/978020350820610.1201/9780203508206 ↗
2. 10.1016/j.compositesa.2003.09.01610.1016/j.compositesa.2003.09.016 ↗
3. 10.1016/S0266-3538(03)00096-410.1016/S0266-3538(03)00096-4 ↗
4. 10.1016/S0079-6700(98)00018-510.1016/S0079-6700(98)00018-5 ↗
5. 10.1007/s11837-006-0234-210.1007/s11837-006-0234-2 ↗
6. 10.1016/j.biortech.2007.09.04310.1016/j.biortech.2007.09.043 ↗
7. Petinakis E · Lignocellul Polym Compos · 2014 · 1710.1002/9781118773949.ch2 ↗
8. 10.1016/j.carbpol.2014.03.03910.1016/j.carbpol.2014.03.039 ↗
9. 10.1177/002199831038502110.1177/0021998310385021 ↗
10. 10.1016/j.matdes.2014.02.04810.1016/j.matdes.2014.02.048 ↗
11. 10.1016/j.apsusc.2013.10.09810.1016/j.apsusc.2013.10.098 ↗
12. 10.1016/j.polymertesting.2007.03.00710.1016/j.polymertesting.2007.03.007 ↗
13. 10.1002/pen.1007710.1002/pen.10077 ↗
14. 10.1177/08927050303334010.1177/089270503033340 ↗
15. 10.1016/S0263-8223(01)00089-710.1016/S0263-8223(01)00089-7 ↗
16. 10.1016/j.compositesa.2004.06.02310.1016/j.compositesa.2004.06.023 ↗
17. 10.1163/15685610276009989810.1163/156856102760099898 ↗
18. 10.1002/app.1994.07051021110.1002/app.1994.070510211 ↗
19. 10.1021/jf00035a07210.1021/jf00035a072 ↗
20. 10.1016/j.polymdegradstab.2011.12.03010.1016/j.polymdegradstab.2011.12.030 ↗
21. 10.1016/j.vacuum.2010.01.01210.1016/j.vacuum.2010.01.012 ↗
22. 10.1007/s00107-014-0815-710.1007/s00107-014-0815-7 ↗
23. 10.1177/089270570809160410.1177/0892705708091604 ↗
24. 10.1016/j.compscitech.2007.04.02810.1016/j.compscitech.2007.04.028 ↗
25. 10.1016/j.carbpol.2005.12.04010.1016/j.carbpol.2005.12.040 ↗
26. 10.1515/hf-2014-021110.1515/hf-2014-0211 ↗
27. 10.1109/TPS.2015.247522010.1109/TPS.2015.2475220 ↗
28. 10.1103/PhysRev.17.27310.1103/PhysRev.17.273 ↗
29. 10.1006/jcis.1996.464010.1006/jcis.1996.4640 ↗
30. 10.1002/app.2430810.1002/app.24308 ↗
31. 10.1016/j.jcis.2010.02.05110.1016/j.jcis.2010.02.051 ↗
32. 10.1002/ppap.20050015210.1002/ppap.200500152 ↗
33. 10.1016/S0142-9418(02)00153-810.1016/S0142-9418(02)00153-8 ↗
34. 10.1006/jcis.2000.695110.1006/jcis.2000.6951 ↗
35. Lekobou WP. Study of atmospheric pressure weakly ionized plasma as surface compatibilization technique for improved plastic composites loaded with cellulose based fillers. PhD Thesis, Washington State University, 2013.
36. Szabo OE · Open Chem · 2015 · 13 · 1