journal article·1997-01

The Effect of Polyamic Acid Binder Concentration on the Processability and Properties of LaRC TPI Composites Made by Suspension Prepregging

A. Gonzalez-Ibarra, R. M. Davis, C. L. Heisey, J. P. Wightman, J. J. Lesko

Publisher page

Abstract

Unidirectional carbon fiber/LaRC TPI composites were prepared by aqueous suspension prepregging. The matrix material was fully imidized LaRC TPI powder, and the binder was LaRC TPI polyamic acid. The effect of the concentration of the polyamic acid binder on composite processability and properties was studied. An optimum concentration range of 2.9-9.4% weight/weight binder/matrix was found that resulted in good prepreg handling characteristics and good consolidation. A binder concentration 2 13.1% led to poorer consolidation of the composites due to an increase in the melt viscosity of the matrix. This increase was probably due to a combination of crosslinking and chain extension of the polyamic acid during the imidization step. Formation of the crosslinked structure was supported by transverse flexure, meso-indentation, and solubility tests.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Silicone and Siloxane Chemistry · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Virginia Polytechnic and State University, Blacksburg, VA 24061; Department of Chemical Engineering.

Virginia Polytechnic and State University, Blacksburg, VA 24061; Department of Chemistry.

Virginia Polytechnic and State University, Blacksburg, VA 24061; Engineering Science and Mechanics Department.

References (31)

Show source-provided references
1. 1. Seferis, J. C. and K. J. Ahn. 1989. 34th International SAMPE Symposium, 34:63-63.
2. Penn, L. S. · 1989 · 49
3. Clemans, S. · SAMPE Quarterly · 1989 · 20 · 38
4. 4. Goodman, K. E. 1990. "Thermoplastic Prepreg Manufactured by Solution Impregnation," M. S. Thesis, Engineering Science and Mechanics Department, Virginia Tech.
5. 5. Leeser, D. and B. Banister. 1989. 21st International SAMPE Technical Conference, 21:507-507.
6. 6. Muzzy, J. D., J. B. Varughese and P. H. Yang. 1991. 36th International SAMPE Symposium, 36:1523-1523.
7. Edie, D. D. · 1989
8. Edie, D. D. · 1988
9. 9. Ogden, A. L., M. W. Hyer, J. T. Muellerleile, G. L. Wilkes and A. C. Loos. 1990. American Society for Composites, 5th Technical Conference, E. Lansing, MI, pp. 249-258.
10. 10. Baucom, R. M. and J. M. Marchello. 1990. 35th International SAMPE Symposium, 35:175-175.10.1080/00050326.1990.10438662 ↗
11. 11. Marchello, J. M. 1991. 36th International SAMPE Symposium, 36:68-68.
12. 12. Towell, T. W., D. E. Hirt and N. J. Johnston. 1990. 22nd International SAMPE Technical Conference, 22:1156-1156.
13. 13. Texier, A. and R. M. Davis. 1991. Proceedings of the Society of Plastics Engineers ANTEC'91 Conference, 37:2018-2018.
14. 14. Lyon, K. R., A. Texier, A. Gungor, R. M. Davis and J. E. McGrath. 1992. 37th International SAMPE Symposium, 37:1301-1301.
15. 10.1016/0032-3861(93)90378-N10.1016/0032-3861(93)90378-N ↗
16. 16. Texier, A. 1990. "The Fabrication of Carbon-Fiber Composites by Aqueous Suspension Prepregging with LaRC TPI and PEEK," M. S. Thesis, Chemical Engineering Department, Virginia Tech.
17. 10.1177/08927057930060010610.1177/089270579300600106 ↗
18. 18. Gonzalez-Ibarra, A. 1993. "The Effects of Polymeric Binders on the Processability and Properties of Composites Made by Suspension Prepregging," M. S. Thesis, Chemical Engineering Department, Virginia Tech.
19. 19. Hou, T. H. and J. M Bay. 1990. 35th International SAMPE Symposium, p. 1594-1594.
20. 20. Johnston, N. J. and T. L. St. Clair. 1986. 18th International SAMPE Technical Conference, p. 53-53.
21. Weaton, J. W. · 1987
22. 22. Lesko, J. J. 1991. "Indentation Testing of Composite Materials: A Novel Approach to Measuring Interfacial Characteristics and Engineering Properties," M. S. Thesis, Engineering Science and Mechanics Department, Virginia Tech.
23. 23. Lesko, J. J. and R. W. Armstrong. 1992. U.S. Patent 5, 133, 210.
24. 10.1177/00219983930270030410.1177/002199839302700304 ↗
25. 10.1520/STP24742S10.1520/STP24742S ↗
26. 10.1080/0021846930802656910.1080/00218469308026569 ↗
27. Buscall, R. · 1985
28. 28. Ferry, J. D. 1961. Viscoelastic Properties of Polymers, New York: John Wiley & Sons, Inc., pp. 1-5.
29. 10.1163/156856190X0057710.1163/156856190X00577 ↗
30. 10.1016/0266-3538(90)90080-O10.1016/0266-3538(90)90080-O ↗
31. 10.1177/00219983910250080210.1177/002199839102500802 ↗