journal article·2013-11

The effect of dispersant on toughening mechanism and structure behaviors of Polypropylene Nanocomposites reinforced with nano α-alumina particles

F Mirjalili, L Chuah, F Danafar, M Soltani, P Chen

Publisher page

Abstract

This article presents a comparative study on the effects of using nano α-alumina (Al 2 O 3 ) on toughening mechanisms and structural behaviors of polypropylene (PP) nanocomposites. The role of using dispersant in nanocomposite preparation was also investigated. For nanocomposite preparation, mixing of the elements was performed using a Haake Poly Drive blending machine at 175°C and the rotor speed of 50 rpm. The notched Izod impact energy obtained for PP was about 27 J/m and by the addition of nano α-Al 2 O 3 (4 wt%) to PP, the notched Izod impact energy increases up to ∼43 J/m. However, higher concentration of nano α-Al 2 O 3 in the nanocomposite resulted in the reduction of Izod impact property due to nano α-Al 2 O 3 agglomeration. Fourier transform infrared spectroscopy (FTIR) spectra of pure PP and PP/nano α-Al 2 O 3 composites demonstrated Al–O bond at 568 cm −1 for nanocomposite spectrum that indicates the creation of nano α-Al 2 O 3 particles. The x-ray diffraction patterns and FTIR spectra of PP/nano α-Al 2 O 3 composites showed that the intensity of the peaks when dispersant was used slightly increased and the arrangement of the peaks are normalized. This observation is attributed to homogeneous dispersion of nano α-Al 2 O 3 filler in the matrix when dispersant was used. Scanning electron micrograph of impact fractured surface showed that the fracture surface of PP/nano α-Al 2 O 3 composite becomes rougher with increasing the content of filler.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Maybod branch, Islamic Azad University, Maybod, Iran

Department of Chemical and Environmental Engineering, Faculty of Engineering, University Putra Malaysia, Malaysia

Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, Ontario, Canada

References (26)

Show source-provided references
1. 10.1080/0022234080256617610.1080/00222340802566176 ↗
2. 10.1177/073168440606513110.1177/0731684406065131 ↗
3. 10.1016/j.compositesa.2003.07.00410.1016/j.compositesa.2003.07.004 ↗
4. 10.1016/j.compscitech.2006.02.01010.1016/j.compscitech.2006.02.010 ↗
5. 10.1002/app.1228110.1002/app.12281 ↗
6. 10.1007/s00216-007-1820-z10.1007/s00216-007-1820-z ↗
7. 10.1016/j.jnoncrysol.2006.02.06810.1016/j.jnoncrysol.2006.02.068 ↗
8. 10.1016/j.ceramint.2010.01.00910.1016/j.ceramint.2010.01.009 ↗
9. Mirjalili F · J Ceram Process Res · 2011 · 12 · 738
10. Mirjalili F · J Ceram Silikaty · 2011 · 55 · 378
11. 10.1177/073168440606206810.1177/0731684406062068 ↗
12. 10.1177/089270571142180510.1177/0892705711421805 ↗
13. 10.1016/j.eurpolymj.2012.02.00610.1016/j.eurpolymj.2012.02.006 ↗
14. 10.1080/0360255090328298610.1080/03602550903282986 ↗
15. Hanim H · Malaysian Polym J (MPJ) · 2008 · 3 · 38
16. 10.1006/jcis.1998.597710.1006/jcis.1998.5977 ↗
17. 10.1016/j.combustflame.2004.10.01010.1016/j.combustflame.2004.10.010 ↗
18. 10.1016/j.ceramint.2006.02.00210.1016/j.ceramint.2006.02.002 ↗
19. 10.1177/002199830707418510.1177/0021998307074185 ↗
20. 10.1007/s12034-008-0005-510.1007/s12034-008-0005-5 ↗
21. 10.3144/expresspolymlett.2008.7810.3144/expresspolymlett.2008.78 ↗
22. 10.1142/S0219581X0500296110.1142/S0219581X05002961 ↗
23. Chen D · J Thermoplast Compos Mater · 2009 · 23 · 1
24. 10.1177/002199830707873610.1177/0021998307078736 ↗
25. 10.1002/polb.2065410.1002/polb.20654 ↗
26. 10.1016/j.eurpolymj.2005.03.00810.1016/j.eurpolymj.2005.03.008 ↗